Image for DOS: Upgrade History
- Version 2.58 - Jul 1, 2010
- Added /LOWMEM (LowMem) option to support imaging machines with memory as low as 4MiB when the File (OS) option is used.
- Other Misc.
- Version 2.57 - Jun 11, 2010
- Added EXT4 support for file access and resizing.
- Support alternate hard drive physical sector sizes up to 4KiB.
- Other Misc.
- Version 2.56 - May 12, 2010
- Fixed potential crash on multi-pass differential backup when lots of fragmentation and not many changes.
- Other Misc.
- Version 2.55a - Apr 9, 2010
- Added support to provide NT Disk Signature on /F and /BASE option via # modifier.
- Version 2.55 - Apr 6, 2010
- Added support to provide NT Disk Signature on /D option via # modifier.
- Other Misc.
- Version 2.54 - Mar 5, 2010
- Improved support for dealing with non-partitioned devices.
- Added new /MD (MakeDir) option to have target path automatically created.
- Added new /CSIG (ChangeNTSig) option for full drive copies and restores.
- Other Misc.
- Version 2.53 - Jan 24, 2010
- Fixed copy of single item to correctly determine if it will fit in target selected location.
- Added new /PHC (PageHiberClear) option to clear part of or truncate page or hibernation file.
- Added new /USBCOT and /USBESAD options to allow control of delays used in accessing USB.
- Other Misc.
- Version 2.52 - Dec 8, 2009
- Adjusted scaling to prevent a potential target not large enough message when scaling to larger drive.
- Added /NOS (NoScale) option to prevent scaling of small partitions.
- Added new set of global geometry settings (/geodis, /geoahs, /geoa2k, /geombr, /geombrv, /geoorg) for easy control and with defaults set to prevent common problems user run into.
- Added new /w7mbr (Win7MBR) option to change the standard mbr code used to the Windows 7 compatible version.
- Added new /mgv (UseValidMBRGeoOnly) option to extend the logic used with the /mg (UseMBRGeo) option.
- Added new /uggs (UseGlobalGeoSettings) option to support overriding of new global geometry settings.
- Changed automatic restore option to add one to the target drive number if BIOS HD0 is USB for images created with Image for Windows or Image for Linux. This is because many BIOSes will boot UFD as HD0 and push the actual HD0 to HD1. To do this, IFD requires that the BIOS properly reports HD0 as being on the USB interface (many do not)
- Other Misc.
- Version 2.51a - Oct 29, 2009
- Updated AUTO restore first track option for GRUB2.
- Fixed problem introduced in 2.50 where disk signature was not being restored with first track when first partition on source disk was located at or above LBA 128.
- Corrected prompts that may reference 64bit numbers.
- Other Misc.
- Version 2.51 - Oct 13, 2009
- Added GRUB2 support.
- Rebuilt CDBOOT.F35 to correct missing files in 2.50a.
- Other Misc.
- Version 2.50a - Sep 30, 2009
- Fixed "A read error occurred while accessing the drive" problem that was
occurring on many USB and 1394 devices that claim compliance to 64bit LBA's when they don't.
- Other Misc.
- Version 2.50 - Sep 24, 2009
- Added 64bit LBA and GPT support (note: GPT support doesn't imply EFI support).
- MakeDisk provides FAT32 support for UFD drives larger than 4GiB.
- Added /ubp (UpdateBootPart) option to restores and copies which have separate boot and system partitions (same target drive only)
- Added Port, User Name, Password support to email option.
- Other Misc.
- Version 2.41 - Aug 2, 2009
- Added /ms option to support moving a single restored partition to a given mbr slot number
- Added $~VER$ file path variable and support for $~SaveNameVar$ variables.
- Changed single partition restore to require /e even if the original slot is available. Previously it would ignore the /e setting and move any added partition to its original location if that location was available.
- Allow setting of geometry options when list of hard drives shown so that full drive restore targets can be setup.
- Other Misc.
- Version 2.40b - July 17, 2009
- Corrected /rb option to work on command line backup.
- Version 2.40a - July 1, 2009
- No Changes - Linux Boot Disk Only.
- Version 2.40 - June 24, 2009
- Add copy/clone option.
- Changed command line parameter handling of a singe dash embedded in data to not require quotes.
- Corrected selection of restoring first track on automatic restore.
- Corrected backup of Linux swap partitions.
- Other Misc.
- Version 2.30a - May 11, 2009
- Corrected /O to work on full drive restores (broken in 2.30).
- Improved check on full drive scaled restores that ultimately won't fit to report it before starting.
- Other Misc.
- Version 2.30 - April 28, 2009
- Added automatic restore option where user doesn't need to choose the target or options.
- Added bc option to maintain backwards compatibility with the TBI file created (files created with this version are not backwards compatible).
- Changed newly created differential backups to be able to find the base file (in same folder) automatically when selected for restore/validate.
- Added ignore option to unable to lock message on restores to attempt forcing the handles to be closed and volume locked.
- Change to always ask what to restore so user can tell what partition is in a single partition backup (without having to use /L or the description).
- Added summary dialog.
- Other Misc.
- Version 2.26b - April 14, 2009
- Misc.
- Version 2.26a - April 3, 2009
- Improved logged message when invalid path provided on command line.
- TBOS updated to boot on more UFDs.
- Other Misc.
- Version 2.26 - March 11, 2009
- Added Save to File option on Show Command dialog.
- Other Misc.
- Version 2.25 - February 26, 2009
- Changed HD list to show device type when available from the BIOS. Note that the device type reported by the BIOS may not be correct (ATA instead of SATA or SCSI instead of RAID).
- Adjust FAT/FAT32 partition FS ID when restoring to new location (when needed).
- Other Misc.
- Version 2.24 - February 7, 2009
- N/A
- Version 2.23 - January 28, 2009
- Corrected restore of first track (mbr) when restoring a single item on a zeroed MBR (was installing standard code instead).
- Allow passing command line with a name.ext without truncating it at the .ext.
- Other Misc.
- Version 2.22 - December 15, 2008
- Misc.
- Version 2.21 - November 14, 2008
- Added support for VirtualPC/VMWare Virtual Drives.
- Other Misc.
- Version 2.20c - October 28, 2008
- Updated to support files up to 4GiB from 2GiB on CD/DVD (ISO).
- Change handling of failed resize to not clear boot sector, but to delete when it overlaps next partition.
- Changed USBLIO option to be disabled by default and value should now be set to 1 (not 8) to enable it.
- Added USBCO option.
- Other Misc.
- Version 2.20b - October 20, 2008
- Updated manual.
- Version 2.20a - October 13, 2008
- Corrected 2.20 problem that would prevent a multi-pass restore from working.
- Other Misc.
- Version 2.20 - October 4, 2008
- Added checkboxes to allow selection of multiple partitions instead of just the entire drive or a single partition. (substantial code changes)
- Added warning when directly accessing files (file direct) and the target would overwrite the source.
- Added auto alignment for command line restores.
- Added /n2ka option to disable the new auto alignment feature.
- Hidden status in MBR is saved on restores when MPT exists.
- Added /mg (UseMBRGeo) option.
- Other Misc.
- Version 2.16a - September 7, 2008
- Automatically handle password assigned by IFW 2.16 when the message regarding use of one of the enhanced compression options was displayed.
- Version 2.16 - September 4, 2008
- Added /purge option to automatically purge old files on command line backups
- Changed to delete failed backups and added global /kfb option to optionally keep them
- Other Misc.
- Version 2.15a - August 29, 2008
- Miscellaneous.
- Version 2.15 - August 8, 2008
- Corrected backup to properly output the first track data when enhanced compression is selected. The "restore first track" option and "entire drive" restores may not be possible with image files created using 2.14 with enhanced compression enabled. In those cases, the partitions would need to be restored individually without the "restore first track" option enabled.
- Added Update BOOT.INI restore option.
- Better documented the relationship between the /uy /un and /um options.
- Other Misc.
- Version 2.14 - August 5, 2008
- Converted to common code base for direct file system access.
- New compression options (not yet optimized).
- Added work around for some 1394 controllers that disable ConfigROM access.
- Other Misc.
- Version 2.13 - June 29, 2008
- Added automatic workarounds and new BIOSMBRM option to deal with various BIOS limitations/bugs which could cause the system to hang when the SATA option in IFD was enabled.
- Added workaround for BIOS (direct) inability to access some devices.
- Corrected restoring a single partition over an extended partition when restore first track enabled.
- Other Misc.
- Version 2.12 - June 19, 2008
- Added Ext2/3 support for File (direct) and resize.
- Changed to not unhide a backed up hidden partition when restored.
- Other Misc.
- Version 2.11 - June 9, 2008
- Added Validate Byte-for-Byte for restores.
- Added additional code to match BIOS (direct) to SATA-AHCI drives for BIOSes not up to latest standards.
- Other Misc.
- Version 2.10a - May 23, 2008
- Prevent asking for removable media that had already been processed during validate/restore.
- Other Misc.
- Version 2.10 - May 20, 2008
- Fixed crash (introduced in 2.09) if CD/DVD drive attached to USB2 and USB2 option was selected.
- Added interactive reboot/shutdown option.
- Changed to support additional IEEE1394 drives that may not have shown up.
- Other Misc.
- Version 2.09 - May 11, 2008
- Added support for SATA AHCI controllers (needed for SATA CD/DVD drive access).
- Other Misc.
- Version 2.08 - Apr 23, 2008
- Added recognition of Linux Swap partition types.
- Other Misc.
- Version 2.07d - Apr 17, 2008
- Added /REBOOT option.
- Changed to allow /rb switch to work with backup operations.
- Allow F12 Cancel interactive prompt even in unattended mode.
- Removed PostValidateB option from .ini (now use PostValidate=2)
- Added support for embedding special file path variables
- Corrected default reboot on command line restores (may not have rebooted when it should have - use /rb switch to control scripts)
- Other Misc.
- Version 2.07c - Mar 20, 2008
- Added additional support for older CD-ROM and DVD-ROM drives (for restoring direct burned discs).
- Version 2.07b - Mar 19, 2008
- Corrected potential "Exception" error that could occur just before backup starts.
- Other Misc.
- Version 2.07 - Mar 15, 2008
- Corrected cluster chain created (had one extra) when creating a File (direct) to FAT/FAT32 file system.
- Added support for NTFS deletion of files (overwrite) when saving directly to NTFS.
- Changed option used for ATAPI access to correct problems on various systems.
- Other Misc.
- Version 2.06 - Feb 28, 2008
- Added more listing option (/opt and /f)
- Changed AlignOnEnd to work as intended and added new option AlignOnEndResize.
- Added Limit Usage option for CD/DVD burning.
- Moved /TE to global options (and added INI support of TermEmulation)
- Made USBLIO=8 the default (To revert back (if speed lost on USB access) you need to set USBLIO=0)
- Other Misc.
- Version 2.05 / 2.05a - Feb 17, 2008
- Complete rebuild after replacement of faulty RAM on build system.
- Corrected meta data in differential backups used by TBIView.
- Change /mo and /te option to occur when encountered on command line.
- Other Misc.
- Version 2.04b - Feb 11, 2008
- Misc.
- Version 2.04a - Feb 11, 2008
- Corrected problem introduced in 2.04 which causes incorrect completion message and clearing of the compression/encryption option.
- Converted USB delay prompt on command line usage to text.
- Version 2.04 - Feb 7, 2008
- Corrected the partition size output to log file for resize
- Corrected encryption option (enc:2 is now enc:3)
- Other misc.
- Version 2.03 - Jan 24, 2008
- Changed to support incorrect error code returned by CLIB IO routines
- Moved Ext DOS Open to be an option since its
operation isn't consistent on different DOS versions.
- Corrected items to support DOS 6.22
- Version 2.02b - Jan 22, 2008
- Corrected skipping clusters marked bad in NTFS.
- Other misc.
- Version 2.02a - Jan 20, 2008
- Corrected wrong sort order under certain conditions when creating files on NTFS
- Other misc.
- Version 2.02 - Jan 14, 2008
- Corrected restore problems caused by read-only object being used.
- Removed extra screen draws causing flicker
- Other misc.
- Version 2.01 - Jan 9, 2008
- Work around added to correct hang and lockup problems with certain servers
- Fixed USBLIO option to work with USB DVD/CD drives. (note: USBLIO=8 is
equivalent to the V1 USBLIO option and can be used in place of USBLIO=1)
- Changed progress update to occur in the
foreground by default (use BGProgress=1 if you'd like to go back to the V2.00 method)
- Fixed trial-expire issue (in trial version) when trying to restore from an IFW created backup.
- Updated manual.
- Corrected rounding of file size interactive backup option display.
- Added new Align2048, ForceHS, ForceHSOnTrunc options (found on the interactive menus via "F6 Geometry").
- Moved AlignOnEnd to be a HDx specific option instead of global.
- Other misc.
- Version 2.00 - Dec 20, 2007
- Major Upgrade.
- Differential Backups.
- Encryption.
- Numerous other changes.
- Version 1.99 - Feb 12, 2007
- Finalized for Vista Restore.
- Version 1.98d - Jul 9, 2006
- Changed CD/DVD speed setting method.
- Version 1.98c - Jun 20, 2006
- Changed command line restore with /CD to not display completed prompt.
- Corrected potential "image stream corrupt" error message when restoring image files from non-direct burned discs.
- Added work around for some CD/DVD drives that could cause the "Accessing Disc" prompt to remain on the screen for a very long time.
- Other Misc.
- Version 1.98b - Jun 8, 2006
- Updated Std Mbr Code
- Other Misc.
- Version 1.98a - Jun 1, 2006
- Tweaked CD/DVD support to support more drives.
- Other Misc.
- Version 1.98 - Apr 30, 2006
- Added support for full formatted DVD-RW media.
- Other Misc.
- Version 1.97 - Apr 13, 2006
- Added new SEQVOLID option.
- Compiled using updated compiler version (code size increased approx 14k)
- Other Misc.
- Version 1.96b - Mar 16, 2006
- Corrects a couple of bugs that affect DVD writing.
- Changed to work more DVD drives. (should be back to 1.95 level of support plus new media)
- Increase timeout for USB devices so that USB 1.1 writing (UHCI=1) doesn't timeout.
- Other Misc.
- Version 1.96 - Mar 13, 2006
- Skips clusters marked bad in NTFS (missing from IFD/IFW)
- New CD/DVD handling.
- Corrects problem which could cause Unrecoverable Exception saving files to an NTFS partition.
- Other Misc.
- Version 1.95 - Nov 20, 2005
- Added ability to provide partition id on command line restores. (note: the A option can conflict with the id when using hex (0x) notation. e.g. id 0x6A with A option must be entered as 106A and not 0x6AA (0x6ANA would be okay))
- Other Misc.
- Version 1.94a - Oct 25, 2005
- Changed to work around issues with certain BIOSes.
- Version 1.94 - Oct 10, 2005
- Added new J (No Eject) and T (Write MBR) options.
- Added new TZ= IFD.INI setting.
- Other Misc.
- Version 1.93 - Sep 5, 2005
- Added new "Additional Options" prompt to interactive menus when restoring to allow users access to the X, A or Z options.
- Restore will attempt to restore the ordinal MPT ID's.
- USB2 Changes and new USBLIO option (use with VT6202).
- Version 1.92a - July 14, 2005
- Corrected problem with file dialog that could cause some files to not be listed (you could still type the name to retrieve it).
- Version 1.92 - July 9, 2005
- On write error during CD/DVD - it will prompt for a new disc instead of exiting.
- Added new Validate Disc option to validate each disc as it's created.
- Added support for an IFD.INI file to set options (instead of environment only)
- Other Misc.
- Version 1.91 - June 5, 2005
- Added basic file dialog to allow browsing folders on Save As.
- Added support for more USB2 devices.
- Added work around for some ATA/ATAPI issues.
- Other Misc.
- Version 1.90 - May 16, 2005
- Modified command line option to allow custom file size. (;Msizeinmb) (2047 max).
- Other Misc.
- Version 1.89 - Apr 12, 2005
- New command line L option (doc in kb).
- Added workaround for some DVD drives with problems.
- More USB device support.
- Other Misc.
- Version 1.88 - Mar 07, 2005
- Added new command line option Z.
- Other Misc.
- Version 1.87 - Feb 10, 2005
- Added additional USB delays (2sec per 5min) but should take care of most devices.
- Added UHCI option to allow old built-in USB 1.1 ports to be used (please note that USB 1.1 is very slow). To use this option you set it up in the environment then view devices under the USB2 menu option. Because this option is set in the environment, you must be using a DOS based boot image for devices to show. (custom CDBOOT.F35 for example)
- Other Misc.
- Version 1.86 - Jan 6, 2005
- Added additional check for DVD+R DL media.
- Added additional delays to USB2 to combat devices which would cause the program to hang intermittently for a period of time before continuing . Adds about 1min per every 15min.
- Other Misc.
- Version 1.85 - Dec 22, 2004
- Adjust values to correct problem burning to DVD-R disc on some drives via USB2
- Other Misc.
- Version 1.84 - Nov 19, 2004
- Enhanced X command line restore option to expand less. e.g. X100 (expand less 100MB)
- Added new M command line restore option to move restored partition to first location it will fit.
- Other Misc.
- Version 1.83 - Nov 11, 2004
- Allow command line restore to specify filename with /cd option. (/cd0filename)
- Allowed restoring from CD's as files (burned externally).
- Other Misc.
- Version 1.82 - Oct 27, 2004
- Added /V Validate command line option.
- Corrected Possible Dump when selecting USB2/1394.
- Version 1.81 - Oct 15, 2004
- Corrected possible setting of bad file attribute.
- Version 1.80 - Oct 12, 2004
- Added direct IEEE1394 and USB2 High Speed support.
- Added CD speed selection when using menu system.
- Other Misc.
- Version 1.74 - Oct 4, 2004
- Corrected a critical problem saving certain EXT2/3 partitions.
- Packaged with makedisk.cfg file for use with MakeDisk (free software page). Note that it is setup to use CDBOOT.F35. If you want to use a MSDOS or FreeDOS diskette image then replace base3 to equal the diskette image)
- Other Misc.
- Version 1.73a - Aug 27, 2004
- Changed to eliminate problems with particular dvd drives.
- Allow image /? from command prompt in windows to get version/parameters.
- Version 1.73 - Aug 21, 2004
- Corrected restore/validation problem with 2GB image files burned to DVD with BINGBURN (other).
- Other misc.
- Version 1.72a - Aug 11, 2004
- Work around added for problem with certain cd/dvd drives which caused IFD to keep asking for a blank cd.
- Version 1.72 - Aug 8, 2004
- Added new X (expand) switch to command line restore.
- Version 1.71 - Jul 9, 2004
- Changed to prevent possible lockup on some machines.
- Version 1.70c - Jul 6, 2004
- Misc. changes and work-arounds.
- Version 1.70b - Jun 28, 2004
- Misc.
- Version 1.70 - Jun 24, 2004
- Corrected possible crash caused by unnamed volumes with garbage in the EBR.
- Added ability to directly access data in FAT/FAT32/NTFS partitions.
- Added new ATA and IGNVLAB options and changed format of environment variables used (old variables continue to work for now but you should update to the new IFD= format)
- Due to the new ATA option, access to ATAPI CD/DVD drives has also changed.
- Other Misc.
- Version 1.61a - May 30, 2004
- Disable extra check of CD disc after close since some drives return error 05 24 00 00.
- Version 1.61 - May 26, 2004
- New command line options for restore (image /?)
- Updated cdboot.f35 to correct problem with no device found message booting the CD on some systems.
- Version 1.60 - May 25, 2004
- Requires less free conventional memory.
- New validation option to validate the image files anytime after they are created.
- Other improvements.
- Version 1.51c - Feb 23, 2004
- Changed "process" to "progress"
- Other misc.
- Version 1.51b - Feb 10, 2004
- Misc.
- Version 1.51a - Jan 24, 2004
- Changed CD loading to pre 1.51 technique to prevent some systems/drives from continually asking for a blank CD.
- Changed restore to not change FAT BPB drive number.
- Version 1.51 - Jan 17, 2004
- Added option to display interactive menu on bootable CD.
- Other Enhancements.
- Version 1.50b and c - Dec 23, 2003
- Added pause when the "This program must be run under DOS and not from a DOS box." message is displayed.
- Version 1.50a - Nov 22, 2003
- Corrected DVD+R closing.
- Version 1.50 - Nov 21, 2003
- Improved CD/DVD support
- Other Misc.
- Version 1.40a - September 4, 2003
- Corrected problem with it continually asking for the last CD when attempting to restore bootable DVD -R/-RW media.
- Added work around for an (Award) BIOS bug that could cause a CD booted restore to hang.
- A couple of other misc.
- Version 1.40 - August 14, 2003
- IOBS is now applied on both imaging and restoring (previously it was only used when imaging).
- Other misc changes.
- Version 1.39a - June 17, 2003
- Corrected to find certain CD devices which weren't detected in 1.39.
- Added new /C option for use with restore switch (can be used in place of the /O switch to clear the MBR and (delete) the EMBR before restoring). Those options only documented on the command line help (image /?)
- Version 1.39 - May 19, 2003
- Faster/Better detection of CD devices.
- Asks validate question up front.
- Requires less memory to create compressed image (equivalent to 1.37c)
- Version 1.38a (and 1.38b) - Apr 16, 2003
- Allows restore to a smaller free space block (up to the last actual used area in the file system) if the source image was created with 1.38 (IFW 1.07) or later and is FAT/FAT32 or NTFS. Note that the program size is 20K larger than 1.37c so if you are running low on memory then you may need to stay with 1.37c.
- Version 1.37c - Feb 14, 2003
- Adds new IOBS=A
- Uses CDCMZ implicitly with DVD media.
- Version 1.37a - Feb 4, 2003
- Adds support for DVD-R/-RW/+R (+RW already supported)
- Adds new environment variables (IOBS and INPA) to solve network performance issues - see user manual. (Manual missing IOBS=3 also supported)
- Version 1.36 - Dec 9, 2002
- Changed the default CD closing method and add new environment variable CDCMZ. Set CDCMZ=1 to use an alternate CD closing method.
- Version 1.35 - Nov 14, 2002
- Enhanced support for keeping lilo active after a restore.
- Changed program to prevent an "unable to update entry" error message when restoring an image on a system a low amount of conventional memory.
- Version 1.34b - Oct 3, 2002
- Allows a slow PC with a Buffer Under-Run Free CD drive to continue whereas before it would display a message that the pc was too slow.
- Version 1.34a - Sep 23, 2002
- Comes with and supports smaller CDBOOT.F35 files.
- Version 1.34 - Sep 9, 2002
- Added new byte-for-byte verification feature.
- Version 1.33d - August 26, 2002
- Brings back some CDROM drives that turned up missing with 1.33b.
- Version 1.33c - August 19, 2002
- Corrected an issue restoring to unaligned partitions.
- Changed configuration to correct reboot problem on some machines.
- Changed how the boot CD is detected. This only affects some machines with multiple CD drives where Image would require the CD be moved to the first CD drive to do the restore.
- Version 1.33b - July 14, 2002
- Imaging directly to a CD drive with buffer under-run free encoding will no longer attempt to prevent an under-run because some drives don't acknowledge the write speed setting.
- Corrected interactive menus to display a CD-R/RW drive when creating a CD where two ATAPI devices are on the same channel and the slave is the CD-R/RW drive.
- Version 1.33a - June 19, 2002
- Misc. (clean-up) changes.
- Version 1.33 - June 18, 2002
- This version corrects a problem introduced in 1.30 which caused some users to receive failed validations after imaging to CD. The CD image is in fact okay and can be restored by versions prior to 1.30. If the CD was being restored to (and over) the same partition is was backed up from then versions 1.30+ can be used to restore only that the user must press ctrl-alt-del (instead of enter) when the failure is reported.
- Version 1.32 - June 5, 2002
- The checksum/crc in 1.30 was worthless on large amounts of data. This version changes the way the checksum/crc is calculated so that it is useful.
- Version 1.31 - June 5, 2002
- Third party A.R.E. routine caused some systems keyboard to not work. This version adds a workaround to address this.
- Corrected calculation for CD Write speed.
- Version 1.30 - June 3, 2002
- Partition images are created more quickly.
- Corrects a problem introduced in 1.20 which could cause a "Unable to mount file system" error when trying to compress an NTFS partition.
- Checksum/crc checking on uncompressed data.
- Version 1.20 - May 6, 2002
- Adds support for imaging to DVD+RW devices/discs. Tested with Philips DVD+RW/200. Confirmation of DVD+R disc support will come later. Note that ISO9660 is still used and therefore the entire CD is allocated for the image backup. If the backups are small then you should continue to use CD-R/RW media (you can use it in the DVD+RW drive).
- Adds support for SCSI or other types of CD-ROM drives via ASPI. You must configure config.sys to load the correct ASPI driver. If you're have Win98 then see the Windows 98 "Boot Disk" (diskette) which includes several ASPI device drivers otherwise, check the website of the manufacturer of the adapter.
- Version 1.12 - Apr 23, 2002
- Added new IAR (auto response) environment variable for use when creating an image to a file so that it won't wait for a key when an error has occurred. Implementer would use errorlevel to check for failure. See user manual for more information.
- Version 1.11 - Apr 8, 2002
- Added check for XMS with an XMS specific error message so users will know that himem.sys (or another memory manager) must be loaded.
- Version 1.10 - Apr 3, 2002
- Added ability to restore from CD as file for a image that was created directly to CD and has only one CD. This allows the restore to occur with no prompts.
- Version 1.09 - Mar 23, 2002
- Added ReiserFS support.
- Corrected issue which could cause a "Reload LILO" message on a restored partition.
- Version 1.08 - Feb 22, 2002
- Updated documentation.
- Added support that when restoring to a new unpartitioned disk that the disk will be bootable without having to do fdisk/mbr.
- Version 1.07 - Feb 21, 2002
- Added new ;s optional component to file name so that a file size limit can be chosen via the command line. Append ;s to file name where s=0=2GB (default), 1=698MB, 2=648MB.
- Added new feature to try and restore extended partition (as it was) if volume being restored to free space unpartitioned space from the command line. Image must have been created with version 1.07 or later.
- Changed the scroll bar to update more smoothly if low compression ratio.
- Corrected interactive display of hard drive selection when more than 2 exist.
- Version 1.06 - Feb 15, 2002
- Corrected to display error message when there is not enough free space in the last free space block.
- Added the IBXT environment variable.
- Version 1.05 - Feb 11, 2002
- Added support for the Yamaha CD Drives
- Version 1.04 - Feb 2, 2002
- Added support to restore from CD's created by a generic burner program.
- Version 1.03 - Jan 23, 2002
- Added new IMSG environment variable support.
- Version 1.02 - Jan 22, 2002
- Added new command line options.
- Changed to acknowledge the no compression option.
- Added new prompt after OEM restore that will allow one more CD restore to occur.
- Version 1.01 - Jan 21, 2002
- First Official Release
- Corrected restore of LILO in an ext2fs type partition.
- Version 1.00 - Jan 4, 2002
- Pre-release.
Support
News and Updates
Contact Us