Produkt został dodany do koszyka.
Wsparcie
Nowości i aktualizacje
null

Firma roku w dziedzinie rozwoju oprogramowania

Nagrody za innowację i doskonałość 2025

Kliknij tutaj po szczegóły

null

QnE Companion

QnE Desktop Companion to doskonały pakiet, który musisz sam wypróbować!

Kliknij tutaj po szczegóły

null

Najnowsze wersje

Subskrybuj kanał RSS lub odwiedź fora, aby uzyskać najnowsze wersje i ogłoszenia.

Fora
Kanał RSS

Skontaktuj się z nami

Sprzedaż

Pomoc techniczna

Zapytania ogólne

Image for Windows: Upgrade History V3

  • Version 3.64 – January 28, 2024
  • Changed the /ALL option (part of /L) to accept values to control the information listed. See manual for details.
  • Changed /L output format. The main change is that the first line is no longer the description but a header (the description follows). Be sure to test your scripts that parse the output.
  • Added /ssid (SaveSysInfoData) global option to enable saving system unique information in the backup image.
  • Added /ur command line option for unattended reboot when restoring would require a reboot.
  • Fixed regression of only two backup sets being kept if /maxdss was not provided and the target was a local drive.
  • Other potential changes, updates and enhancements.
  • Version 3.63 – December 14, 2023
  • Update to include new Image for Linux boot disk (LBD307EN).
  • Version 3.63 – December 11, 2023
  • WinPE/RE Builder: Several BootWIM and boot issues fixed.
  • Other potential changes, updates and enhancements.
  • Version 3.62 – September 26, 2023
  • Added "Once and Remove" schedule task option that expires the task after 1 hour and removes it 2 minutes later. A running task is not affected.
  • Change reboot to WinRE to keep shutdown option (if selected) instead of changing to reboot.
  • Corrected Email Settings UI to not double encode {# #} encoded passwords. (Open Settings dialog, click Ok to save and apply the update)
  • Improved parsing of LVM Metadata.
  • Several boot issues fixed; basic support for .msu packages; TBLauncher fix for updating programs.
  • Other potential changes, updates and enhancements.
  • Version 3.61a – July 12, 2023
  • Version was updated only to trigger „Check for Update” notification of update.
  • TBWinPE/RE Builder: Fixed boot issue 0xc000a004 when using WinRE from Windows 10 June 2023 update.
  • Version 3.61 – July 9, 2023
  • Added /sor (StartOverrideReset) restore/copy option.
  • TBWinPE/RE Builder: Added screenshot option and workaround for Windows 11 screen refresh.
  • TBINotify: New option to reset last backup on system tray context menu when warning is showing.
  • Other potential changes, updates and enhancements.
  • Version 3.60 – April 27, 2023
  • Fix additional regression with $USNJrnl caused by NTFS redo/undo triggering chkdsk.
  • Version 3.59 – April 19, 2023
  • Fix NTFS noisy chkdsk artifact regression on $USNJrnl file.
  • Version 3.58 – April 14, 2023
  • Updated the default look of GUI Tree Views and added option /clrbts (ColorBarTintShade), /tvsb (TVSmallBars).
  • TBWinPE/RE Builder: Extract WinRE WIM from Windows ISO; additional support for user selected WinRE WIM; select mouse cursor type/size; set TBLauncher menu display count.
  • Updated NTFS support to prevent potential chkdsk artifact.
  • Other potential changes, updates and enhancements.
  • Version 3.57 – January 17, 2023
  • Added /flags (Flags) option to use legacy logic for /maxdds. New logic works around certain NAS devices handling of free space.
  • Added /fsp (FreeSpacePad) option.
  • Updated the look of GUI Tree Views and added new options /clrbu (ColorBarUsed), /clrbn (ColorBarUnknown), /clrbo (ColorBarOutline), / clrba1 (ColorBarArea1), /clrba2 (ColorBarArea2), /clrthi (ColorTVHDItem), /clrtpi (ColorTVPartItem), /clrtvi (ColorTVVolItem).
  • Added /txtree (TextTree) option (Available in UI).
  • Added /tae (TreeAutoExpand) option (Available in UI).
  • Added /tih (TreeItemHeight) option.
  • Added /dclbhk (DisableCLBHotKeys) option for screen readers that read the & symbol (Available in UI).
  • Output format when using /L /F has changed.
  • System requirements changed. See forums or manual for details.
  • Other potential changes, updates and enhancements.
  • Version 3.56 – November 1, 2022
  • Change accessible checkboxes to be readable by narrator.
  • Added /nog (NoGraph) option.
  • Note: This will be the last version signed with a 3rd party provided SHA1 certificate.
  • Other potential changes, updates and enhancements.
  • Version 3.55 – September 15, 2022
  • Updated TBLauncher.
  • Other potential changes, updates and enhancements.
  • Version 3.54 – September 8, 2022
  • Update TBWinPE Builder to support Windows 11 22H2 ADK.
  • Update for Win10 change of how it handles / reports certain errors on write.
  • Fix regression relateing to higher logging levels.
  • Fix potential multicasting sync issue.
  • Other potential changes, updates and enhancements.
  • Version 3.53 – June 13, 2022
  • Updated UI.
  • Fix /msvr to handle multiple commands sent at once.
  • Added /query option to display status of a running instance of IFW (including in background).
  • Added optional maximum wait time parameter to /wait (e.g. /wait:1234 to wait up to 1.234 seconds)
  • Other potential changes, updates and enhancements.
  • Version 3.52 – April 29, 2022
  • Fixed additional regression with multi-file multi-partition backup.
  • TBWinPE/RE builder updates.
  • Updated translations.
  • Other potential changes, updates and enhancements.
  • Version 3.51 – March 24, 2022
  • Fixed regression with multi-file full drive backup.
  • Changed Set Target Offline to not bring back online if signature collision is detected.
  • Created new multi-language installer for Windows Vista or later and retained the older legacy installer if needed for older Windows versions.
  • Fixed potential crash when deleing from simple operations list and the network item exists.
  • Other potential changes, updates and enhancements.
  • Version 3.50 – January 15, 2022
  • Added /askuncpw (AskForUNCPWBeforeReboot) option to enable entering a UNC password before rebooting to TBWinRE.
  • Corrected reboot to TBWinRE to pass the password for encrypted file(s).
  • Enhanced TBWinPE Builder.
  • Other potential changes, updates and enhancements.
  • Version 3.49 – December 24, 2021
  • Added BINGBURN, BURNCDCC, PARTINFO to utilities menu.
  • Added rebuild for reboot option to utility menu.
  • Enhanced TBWinPE Builder.
  • Other potential changes, updates and enhancements.
  • Version 3.48 – December 8, 2021
  • Added /hp copy and restore option to set the file system ID to hidden.
  • Added support to restore full drive raw backup created with multi-file enabled.
  • Added /stol (SetTargetOffline) to enhanced support for restoring certain backups such as entire drive raw.
  • Added /rgd option to reset global options to default at that point on the command line to override .ini file.
  • Added utility button for quick access to included utilities and scripts.
  • Added /noutil (NoUtilityButton) option to disable new utility button.
  • Added icons to buttons.
  • Added /boottbwr (BootTBWinRE) option to offer reboot to TBWinRE when unable to lock on restore.
  • New ?PrOmPt? password option for /login to prompt for password.
  • Add installer option for /Name= and /Key= to apply the name and key during automated installations.
  • Other potential changes, updates and enhancements.
  • Version 3.47 – September 27, 2021
  • Scheduled task option in settings will now use a local dialog instead of using the task scheduler itself.
  • Added the partition list to the details given for a drive when simple operations is enabled and the information button used.
  • Logging output includes size information instead of only sectors for certain items.
  • Logging output of the completion code includes additional information.
  • Corrected dot in filename from causing issues with hash file naming.
  • Other potential changes, updates and enhancements.
  • Version 3.46 – July 3, 2021
  • Updated version to keep consistent with changed imaging products.
  • Other potential changes, updates and enhancements.
  • Version 3.45 – June 18, 2021
  • Changed the overwrite partitions and files dialog to use a fixed width font for proper alignment.
  • Changed to allow selection of a network location in simple operations mode through the UI.
  • Other potential changes, updates and enhancements.
  • Version 3.44 – May 20, 2021
  • Expanded the options available for scheduling a task.
  • Corrected handling edge case of foreign characters in registered name.
  • Changed installer to suppress prompts on errors during silent installs.
  • Other potential changes, updates and enhancements.
  • Version 3.43 – March 6, 2021
  • Added description to Error code 75 that could show up with no description in log.
  • Added Windows version to IFW.LOG.
  • Changed logging to put out time prefix even if multi-line log item.
  • Corrected handling of a small range of foreign characters in registered name.
  • Corrected potential of multicast to stall with „Waiting for Instructions”.
  • Other potential changes, updates and enhancements.
  • Version 3.42 – December 17, 2020
  • Handle foreign characters better entering registration name and key and with TBWinPE Builder.
  • Obsoleted /cp (CodePage) option and added support for a new registry DWORD value CodePage at HKLM\SOFTWARE\TeraByte Unlimited\Image. Note: If you have any problems with stored passwords or characters in general creating the value as zero will revert the codepage to match what prior versions used.
  • Added global option /asd (AllowSimpleDelete) to allow a user to delete the files listed on the validate or restore simple operations list by using the delete key.
  • Removed noisy b4b errors from logging to event log unless loglevel bit 0x80000000 is set.
  • Other potential changes, updates and enhancements.
  • Version 3.41 – August 1, 2020
  • Enhanced makedisk to support putting large (>4GiB) .TBI files on a TBWinPE/RE boot DVD/BD disc.
  • Changed to allow certain file path variables to work with changes only backups that were not available previously.
  • NOTE: If using incrementals/differentals for GPT drives with an Intel RST partition then you will need to create a new full.
  • Other potential changes, updates and enhancements.
  • Version 3.40 – May 28, 2020
  • Fixed potential crash saving to partition with large cluster size.
  • Added more descriptive file system id descriptions for GPT partitions.
  • NOTE: If using incrementals/differentals for GPT drives with a Windows RE or Intel RST partition then you will need to create a new full.
  • Corrected full drive raw copy operation.
  • Other potential changes, updates and enhancements.
  • Version 3.39 – April 20, 2020
  • Packaged with new MAKEDISK.EXE that allows a multi-partition option for UFD.
  • Added /mi (MaxIncrementals) option to UI, moving EMAIL settings to its own tab.
  • Other potential changes, updates and enhancements.
  • Version 3.38 – February 28, 2020
  • Changed default of /fddc (FDDevCache) to use lazy write. Prior default was /fddc:1
  • Corrected additional Unicode regressions.
  • Other potential changes, updates and enhancements.
  • Version 3.37 – January 25, 2020
  • Added /utg (UseTargetGUID) option to reuse overwritten partitions GUID.
  • Added check to verify PHYLock driver exists after 3 second delay when installing PHYlock driver.
  • Note: Passwords stored with this version require this version or newer to be usable.
  • Several other changes, updates and enhancements.
  • Version 3.36 – December 20, 2019
  • Corrected consolidate option to pull forward exclusion list.
  • Updated to include TBOSDT 1.96.
  • Other potential changes, updates and enhancements.
  • Version 3.35 – December 14, 2019
  • Updated to include TBOSDT 1.95.
  • Added /sud (SaveUEFIData) option.
  • Other potential changes, updates and enhancements.
  • Version 3.34 – November 11, 2019
  • Fixed regression where the viewing command line reset the compression option to be the default for simple operations.
  • Removed obsolete reference that prevented email from being able to use IP6 address types.
  • Fixed potential issue with a GPT created on 4K sector sized disks.
  • Packaged with new makedisk version that supports Unicode.
  • Other potential changes, updates and enhancements.
  • Version 3.33 – October 16, 2019
  • Added NTFS Large cluster support.
  • Change to be packaged with IFL x64 version instead of IFL x86 version.
  • Other potential changes, updates and enhancements.
  • Version 3.32 – August 30, 2019
  • The image file created by this version requires an Image version 3.32 or later to restore.
  • Potential speed enhancements for restore and validate byte-for-byte. Note: Using the defaults may result with some faster systems seeing slightly slower differential/incremental restore times than the prior version.
  • Added /vsseex (VSSExcludeExtra) option to prevent byte-for-byte validate errors when using VSS on Win10. The VSS bug/problem causes inconsistent data being returned for areas used by certain file system metadata files.
  • Change options /mtdecomp, /mtso, /mtvb defaults.
  • Added /mtsomt (MTSectorsOutMT) option.
  • Added /vbbm (ValidateBytesBufMultiplier) option that enables new validate byte-for-byte method.
  • Added /mtvbbm (MTValidateBytesBufMultipiler) option for the new /mtsomt option.
  • Added ability to append a custom description to simple mode operation backups.
  • Corrected exFAT cluster size calculation for large volumes.
  • Corrected a potential exFAT resize failure.
  • Changed /uy to retry failed locks on backup up to 5 times before continuing.
  • New right click and TBIHD options added to the simple mode validate/restore file selection screen.
  • Fixed regression with /wipe option on single item restores/copies.
  • Corrected restoring multi-pass with pre-validate option.
  • Other potential changes, updates and enhancements.
  • Version 3.31 – June 25, 2019
  • Added $MSVR$ option to /STDOUT option.
  • Other potential changes, updates and enhancements.
  • Version 3.30 – May 18, 2019
  • Corrected issue that could cause restored partitions remaining locked until exiting the program.
  • Fixed OK button to work on simple restore options dialog.
  • Added „Write Standard MBR Code” option to simple operations copy and restore.
  • Change simple operation copy and restore to write entire first track (RFTS= available).
  • Enhanced resizing calculations when a recovery partition is specified via /rp.
  • TBWinPE builder added support for TBIHD and scanning/connecting to basic Wi-Fi networks.
  • Other potential changes, updates and enhancements.
  • Version 3.29 – April 26, 2019
  • The image file created by this version requires an Image version 3.29 or later to restore.
  • Change to ignore email configuration if no host (allowing other fields to be set).
  • Fixed potential abnormal termination at end of operations.
  • Full drive restore sizing and scaling enhancements.
  • Added bit 17 (0x200) to /of option to allow 3 digit padding of extensions of image files created (hash files not affected).
  • Added /hdir option to allow placing hash files in an alternate location.
  • Other potential changes, updates and enhancements.
  • Version 3.28 – April 6, 2019
  • Fixed regression with /msvr sending Unicode instead of multi-byte data.
  • Fixed potential creation of thousands of empty files and faulting during simple mode backup.
  • Added /loginout (LogInOut) option.
  • Other potential changes, updates and enhancements.
  • Version 3.27 – March 18, 2019
  • Fix regression reading various single byte input files.
  • Added more EMBR out of sync indicators.
  • Change disk type conversion from out of sync EMBR to MBR to use MBR only.
  • Added the new TBIHD utility to TBIView. TBIHD allows loading .TBI files has physical hard drives.
  • Changed installer to allow changing TBIView components.
  • Changed /logl (LogLevel) to use bit 15 (8000h) as flush indicator instead of level 10 or higher.
  • Added TBWinPE/RE builder option to automatically add installed storage and network drivers to build as well as option to build with basic Wi-Fi functionality and ability to export existing Wi-Fi profiles to use.
  • Other potential changes, updates and enhancements.
  • Version 3.26 – February 7, 2019
  • The image file created by this version requires an Image version 3.26 or later to restore.
  • Added /skuj (SkipUsnJrnl) option to omit the usnjrnl data from being backed up.(
  • Fix issue where email could be cut off or log Email send failure 97.
  • Enhance changing UUID on Ext2/3/4 file system to support csum feature.
  • Change simple operation mode to offer limited options for backup, copy and restore.
  • Added /opw (OPW) option to support saving obfuscation of password and saving a default password.
  • Fix regression starting with 3.07 on using backwards compatible option.
  • New schedule task UI via Schedule Task button on summary dialog.
  • TBIView windows versions offers option to find file by lba or list changed files.
  • Released as Unicode version (no longer mulit-byte version). Ensure all binary files updated to latest versions.
  • Other potential changes, updates and enhancements.
  • Version 3.25 – December 8, 2018
  • Repackaged with TBOSDT 1.85 to fix regression in SET TEXTLINE.
  • Version 3.25 – December 7, 2018
  • Added /cp (CodePage) option and changed default.
  • Corrected conflict between restore first track and wipe unused sectors options where restored first track sectors were wiped on full drive restore.
  • Updated BartPE builder for the latest projects.
  • Change NTFS support to pull forward new style security references.
  • Added View/Mount buttons to simple operations file selection dialog.
  • Build platform moved from VS2008 to VS2017.
  • Other potential changes, updates and enhancements.
  • Version 3.24 – October 11, 2018
  • Remove trailing spaces from filename (/f) command line parameter.
  • Added buttons in settings to start the boot media wizards that are found in the default locations.
  • Version 3.23 – October 10, 2018
  • Changed Show/Save Command to not output a command line that uses DOS or Windows escape sequences.
  • Changed Show/Save Command to create the proper command line for Simple Operations backup.
  • Other potential changes, updates and enhancements.
  • Version 3.22a – September 17, 2018
  • Corrected regression on VSS with Bitlocker backing up RAW instead of used areas only.
  • Version 3.22 – September 8, 2018
  • Add /lvm (LVM) option to support data-only areas of self contained LVM partitions.
  • Add full support for exFAT.
  • Graphic buttons now print text to support translated versions.
  • Other potential changes, updates and enhancements.
  • Version 3.21 – July 28, 2018
  • Update for TBOSDT update.
  • Other potential changes, updates and enhancements.
  • Version 3.20 – July 2, 2018
  • Potential changes, updates and enhancements.
  • Version 3.19 – June 24, 2018
  • Added support for BootIt UEFI hidden GPT.
  • Reverted the create sector hash option to default to false again and renamed the option in the UI.
  • Other potential changes, updates and enhancements.
  • Version 3.18 – May 4, 2018
  • Fix trial version timeout creating TBWinPE/RE boot disk.
  • Changed the default to create the sector hash on backup.
  • Other potential changes, updates and enhancements.
  • Version 3.17 – April 11, 2018
  • Added support for {# #} style passwords with /login option.
  • Fix potential problem during EXT2/3/4 resize caused by missing inode flush.
  • Output /pw to scheduled tasks and command line view.
  • Moved location for Show Command and Schedule Backup.
  • Added /showtbwp (ShowTBWinPE) button option to save command lines for TBWinPE/RE environment and BootWim support.
  • Change to use disk GUID on differential matching if GPT drive instead of always using MBR signature.
  • Change so global options on interactive command line are not saved to .INI file unless in UI.
  • Several enhancements to TBWinPE builder, including new BootWIM options, Support for Narrator in TBWinRE Windows 10 1703+ builds, and work-around for potential issues when building on Win10 versions newer than 1709.
  • Other potential changes, updates and enhancements.
  • Version 3.16 – January 12, 2018 – Reissued
  • Version with IFD 3.16 rebuilt for proper executable.
  • Version 3.16 – January 12, 2018
  • Corrected NTFS condition that could cause crash on mount.
  • Added version check button to settings.
  • Fixed paths for latest TBIView and TBIMount versions while in simple operations mode.
  • Ignore excluding Active Directory database if included in FilesToNotBackup.
  • Added ProtectIt™ component to protect \TERABYTE_TBI_BACKUPS folders from modification from other applications.
  • Other potential changes, updates and enhancements.
  • Version 3.15 – December 15, 2017
  • New release for updated TBOSDT.
  • Enhanced COPYWIN.TBS and CHGDTYPE.TBS scripts.
  • Change to only select volumes with drive letters for the PHYLock disk cache.
  • Other potential changes, updates and enhancements.
  • Version 3.14 – December 9, 2017
  • Corrected regression on foreign character handling.
  • Other changes, updates and enhancements.
  • Version 3.13 – November 10, 2017
  • Corrected exception fault that would occur at end of run when /exlist was used.
  • Added /rfsid (RelaxFSID) option.
  • Changed /vsshes command to do its processing even when Windows VSS reports (starting in 1709) that it supports the EFI System partition.
  • Other changes, updates and enhancements.
  • Version 3.12 – October 25, 2017
  • Fixed regression introduced in 3.09 that could cause a deadlock at the end of a IFW GUI operation.
  • Added /trim (TRIM) option to restore and copy operations.
  • Expanded the Update Boot Partition (/ubp) option to include all NTFS partitions as well as active partition on the target drive.
  • TBWinPE Builder: Fixes and enhancements.
  • TBINotify: Added button to settings to turn off fast startup.
  • Other changes, updates and enhancements.
  • Version 3.11 – September 19, 2017
  • Fixed regression in /mserver option that caused connection to disconnect prematurely.
  • TBWinPE Builder: Fixes and enhancements.
  • Other potential changes, updates and enhancements.
  • Version 3.10 – August 19, 2017
  • First track errors won’t automatically abort backup.
  • Added /maxdss (MaxDriveStoreSize) option to limit simple operation store size for a drive.
  • TBWinPE Builder: Enhanced /bootwim command line option.
  • Miscellaneous changes, updates and enhancements.
  • Version 3.09 – July 25, 2017
  • TBWinPE Builder: Added /bootwim command line option to directly boot a TBWinPE/RE WIM file and optionally run a script or IFW command.
  • Miscellaneous changes, updates and enhancements.
  • Version 3.08 – June 28, 2017
  • Added /ivdfs (IgnoreVirtDevFileSize) to ignore sector alignment check on virtual drive file size.
  • Corrected metadata restores when used with encryption option.
  • Corrected corrupted data at start of CD/DVD/BD (disc 2+) when validate disc option was used and mtcomp:0 was not.
  • Change delete of exlist or vss excluded files on NTFS to update metadata of the directory the file existed in.
  • Other potential changes, updates and enhancements.
  • Version 3.07 – May 26, 2017
  • The image file created by this version requires an Image version 3.07 or later to restore.
  • Added /tmbps (ThrottleMbps), /tsecs (ThrottleSeconds), /tintv (ThrottleIntervals) option to throttle file output.
  • Added /imdsf (IgnoreMDSpecialFiles) option for use when /usemd option is used.
  • Added /mdudd (MDUseDirData) option for use when /usemd option is used.
  • Added /efdc (ExFileDevCache) option.
  • Added /usemd option for Restores.
  • Changed format of metadata hash files (old files will be ignored)
  • Added /ivbe (IgnoreB4BError) to ignore byte-for-byte errors (still logged)
  • Updated EULA to increase the single license allowance on personal non-commercial use from 3 to 5 systems.
  • Other potential changes, updates and enhancements.
  • Version 3.06a – March 19, 2017
  • Fix missing check on attribute list attribute when /usemd (UseMetadata) used. If you use /usemd, you must update to this version, otherwise this update is optional.
  • Other potential changes, updates and enhancements.
  • Version 3.06 – March 14, 2017
  • Added /usemd (UseMetadata) backup option for changes only backup (Note: Time remaining will not be very accurate).
  • Added support for invalid extended partition EBR chains.
  • Added /wait as default on saving command line to a file.
  • Renamed „Speed Up Changes Only Backup” to „Create Sector Hash File”.
  • Other potential changes, updates and enhancements.
  • Version 3.05 – December 17, 2016
  • Added /del (DelUsedHash) backup option for changes only backup to delete hash files used (if any).
  • Added new .#_# hash file to support changes only backup while moving .tbi files elsewhere.
  • Changed the file created by consolidation (/combined) to remain the base of any remaining backups in the chain when the /del (DelCombined) option is used.
  • TBWinPE builder updated.
  • Other potential changes, updates and enhancements.
  • Version 3.04 – November 11, 2016
  • Added workaround for Win10 AU scheduled tasks not running.
  • Added /vsshes (VSSHandleEFISystem) option to handle EFI System partition when using VSS to prevent byte-for-byte errors.
  • Added /vssexw (VSSExcludeWriter) option.
  • Command line parameter errors, such as drive not found, will now be emailed when email enabled.
  • Other potential changes, updates and enhancements.
  • Version 3.03a – October 20, 2016
  • Fixed bug on single partition automatic restore that would overwrite the MBR.
  • Version 3.03 – October 10, 2016
  • Added /cd (CompactData) option to allow FAT, FAT32, NTFS partitions to be restored to the amount of data in the partition instead of last used area.
  • Fixed indexes in a Changes Only Backup. The indexes are only used by TBIView and TBIMount.
  • Added additional file path variables.
  • Added option for Save to File on Show Command where holding down the shift key will pull in global options.
  • Enhanced Ext2FS and XFS support.
  • Other potential changes, updates and enhancements.
  • Version 3.02 – August 26, 2016
  • Wrapped all drivers and executable with dual signatures to support outdated Win7 x64.
  • Updated PHYLock to version 14. Changed to reduce chance of PHYLock error 2 when disk caching used.
  • Other potential changes, updates and enhancements.
  • Version 3.01 – August 16, 2016
  • Corrected problem (identified as pure virtual function call) that could occur when an operation was started.
  • Other potential changes, updates and enhancements.
  • Version 3.00c – August 11, 2016
  • Correct bugcheck on aggressive retry failure.
  • Version 3.00b – August 9, 2016
  • Update signature on TBIMount and PHYLock drivers to support new installations to Windows 10 (anniversary) versions.
  • Version 3.00a – August 5, 2016
  • Clean up issues.
  • Other potential changes, updates and enhancements.
  • Version 3.00 – August 4, 2016
  • Major Update – base for new features moving forward.
  • Added more threads for compression and restoring.
  • Added support for sending email via SSL/TLS.
  • Change delete of image from within program to also delete images dependent on the ones being deleted.
  • Added /mtcomp (MTComp) option.
  • Added /mtdecomp (MTDecomp) option – do not change.
  • Added /mtso (MTSectorsOut) option.
  • Added /mtvb (MTValidateBytes) option.
  • Added /ddm (DisableDepMatch) option.
  • Added /fddc (FDDevCache) option.
  • Added /ict (IncrementalChainThreshold) option.
  • Repackaged installer to include entire suite.
  • The image file created by this version requires an Image version 3.00 or later to restore.
  • Version 2.x images can be restored using version 3.x.
  • Several other changes, updates and enhancements.

Version 2 Upgrade History