One hour and 10 minutes into an IFW image/validate operation (just
started validation), I get this message: PHYLock failed to cache all
changes. Please increase the cache size in settings.
Am using IFW V 2.80, latest Phylock version also installed. Imaging
complete drive (four partitions - MAC and Bootcamp)
Of course this aborted the whole effort (color me very ticked off)!
Not sure where to attack this. Does KB article 323 apply with WIN 7?
In three years, I have never seen this before on my PC, just been using
whatever settings are default.
AlanD
Phylock Cache Size Issue
-
TeraByte Support
- Posts: 4105
- Joined: Thu May 05, 2011 10:37 pm
Re: Phylock Cache Size Issue
you look in ifw.log to see the phylock error code then see
http://www.terabyteunlimited.com/kb/article.php?id=551
(you also need to ensure everything is clean via chkdsk /f - and you don't
want to run while defragging and sometimes indexing can cause a lot of
changes if new system). You can use VSS as well, but since that doesn't
cache everything backed up you'd have to use validate and not validate
byte-for-byte.
"AlanD" wrote in message news:[email protected]...
One hour and 10 minutes into an IFW image/validate operation (just
started validation), I get this message: PHYLock failed to cache all
changes. Please increase the cache size in settings.
Am using IFW V 2.80, latest Phylock version also installed. Imaging
complete drive (four partitions - MAC and Bootcamp)
Of course this aborted the whole effort (color me very ticked off)!
Not sure where to attack this. Does KB article 323 apply with WIN 7?
In three years, I have never seen this before on my PC, just been using
whatever settings are default.
AlanD
http://www.terabyteunlimited.com/kb/article.php?id=551
(you also need to ensure everything is clean via chkdsk /f - and you don't
want to run while defragging and sometimes indexing can cause a lot of
changes if new system). You can use VSS as well, but since that doesn't
cache everything backed up you'd have to use validate and not validate
byte-for-byte.
"AlanD" wrote in message news:[email protected]...
One hour and 10 minutes into an IFW image/validate operation (just
started validation), I get this message: PHYLock failed to cache all
changes. Please increase the cache size in settings.
Am using IFW V 2.80, latest Phylock version also installed. Imaging
complete drive (four partitions - MAC and Bootcamp)
Of course this aborted the whole effort (color me very ticked off)!
Not sure where to attack this. Does KB article 323 apply with WIN 7?
In three years, I have never seen this before on my PC, just been using
whatever settings are default.
AlanD
Re: Phylock Cache Size Issue
On 2013-03-20 8:33 PM, AlanD wrote:
> One hour and 10 minutes into an IFW image/validate operation (just
> started validation), I get this message: PHYLock failed to cache all
> changes. Please increase the cache size in settings.
>
> Am using IFW V 2.80, latest Phylock version also installed. Imaging
> complete drive (four partitions - MAC and Bootcamp)
>
> Of course this aborted the whole effort (color me very ticked off)!
>
> Not sure where to attack this. Does KB article 323 apply with WIN 7?
>
> In three years, I have never seen this before on my PC, just been using
> whatever settings are default.
>
> AlanD
>
>
Followup to my post above:
I looked at the external drive supposedly being used to store the image
(in Disk management) and it is still virgin - one untouched NTFS healthy
primary partition. It should show four partitions. Don't now know what
was being doing that one hour + operation??? The image file doesn't
exist - internally or on the external drive.
> One hour and 10 minutes into an IFW image/validate operation (just
> started validation), I get this message: PHYLock failed to cache all
> changes. Please increase the cache size in settings.
>
> Am using IFW V 2.80, latest Phylock version also installed. Imaging
> complete drive (four partitions - MAC and Bootcamp)
>
> Of course this aborted the whole effort (color me very ticked off)!
>
> Not sure where to attack this. Does KB article 323 apply with WIN 7?
>
> In three years, I have never seen this before on my PC, just been using
> whatever settings are default.
>
> AlanD
>
>
Followup to my post above:
I looked at the external drive supposedly being used to store the image
(in Disk management) and it is still virgin - one untouched NTFS healthy
primary partition. It should show four partitions. Don't now know what
was being doing that one hour + operation??? The image file doesn't
exist - internally or on the external drive.
Re: Phylock Cache Size Issue
Alan,
Can you post the ifw.log for that operation?
Can you post the ifw.log for that operation?
Re: Phylock Cache Size Issue
On 2013-03-20 9:11 PM, Brian K wrote:
> Alan,
>
> Can you post the ifw.log for that operation?
>
>
here tis. this log goes back to about the sixth when I first installed
IFW. note satisfactory images back then
--------------------------------------------------------------------------
[3/6/2013 5:35:45 PM] Image for Windows 2.80 (GUI)
[3/6/2013 5:35:45 PM] Starting ...
imagew.exe.exe /b /d:w0 /f:"F:\Backup-w0-$~YYYY$-$~MM$-$~DD$-$~HHMM$" /vb
[3/6/2013 5:35:45 PM] PHYLock is waiting for drive writing to stop ...
[3/6/2013 5:35:57 PM] PHYLock using drive C:
[3/6/2013 5:35:57 PM] PHYLock Started
[3/6/2013 5:35:57 PM] PHYLock Using Disk
[3/6/2013 5:35:57 PM] PHYLock version 10
[3/6/2013 5:36:06 PM] Backup: Drive 0 EFI Partition (01) 200 MiB EFI System
[3/6/2013 5:36:06 PM] To: F:\Backup-w0-2013-03-06-1733.TBI
[3/6/2013 5:36:06 PM] INFO: Total Sectors:409600 Total Allocated:37582
[3/6/2013 5:36:06 PM] INFO: 37582 Sector(s) backed up
[3/6/2013 5:36:06 PM] Backup: Drive 0 (E:) Untitled 1 Partition (02) 312805 MiB OS X
[3/6/2013 5:36:06 PM] To: F:\Backup-w0-2013-03-06-1733.TBI
[3/6/2013 5:42:42 PM] INFO: Total Sectors:640625024 Total Allocated:56178760
[3/6/2013 5:42:42 PM] INFO: 56178760 Sector(s) backed up
[3/6/2013 5:42:42 PM] Backup: Drive 0 Recovery HD Partition (03) 620 MiB OS X
[3/6/2013 5:42:42 PM] To: F:\Backup-w0-2013-03-06-1733.TBI
[3/6/2013 5:42:50 PM] INFO: Total Sectors:1269536 Total Allocated:998232
[3/6/2013 5:42:50 PM] INFO: 998232 Sector(s) backed up
[3/6/2013 5:42:50 PM] Backup: Drive 0 (C:) BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/6/2013 5:42:50 PM] To: F:\Backup-w0-2013-03-06-1733.TBI
[3/6/2013 5:48:27 PM] INFO: Total Sectors:822841344 Total Allocated:46102184
[3/6/2013 5:48:27 PM] INFO: 38143200 Sector(s) backed up
[3/6/2013 5:48:28 PM] Validating: EFI Partition (01) 200 MiB EFI System
[3/6/2013 5:48:28 PM] From: F:\Backup-w0-2013-03-06-1733.TBI
[3/6/2013 5:48:29 PM] Validating: Untitled 1 Partition (02) 312805 MiB OS X
[3/6/2013 5:48:29 PM] From: F:\Backup-w0-2013-03-06-1733.TBI
[3/6/2013 5:56:53 PM] Validating: Recovery HD Partition (03) 620 MiB OS X
[3/6/2013 5:56:53 PM] From: F:\Backup-w0-2013-03-06-1733.TBI
[3/6/2013 5:57:03 PM] Validating: BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/6/2013 5:57:03 PM] From: F:\Backup-w0-2013-03-06-1733.TBI
[3/6/2013 6:03:12 PM] Operation Completed with Error Code 0
[3/6/2013 6:03:12 PM] Stop
--------------------------------------------------------------------------
[3/6/2013 7:16:24 PM] /b /d:w0 /f:F:\RESTORE\$~YYYY$-$~MM$-$~DD$ /comp:14 /vb
[3/6/2013 7:16:24 PM] Image for Windows 2.80 (GUI)
[3/6/2013 7:16:24 PM] Starting ...
imagew.exe.exe /b /d:w0 /f:"F:\RESTORE\$~YYYY$-$~MM$-$~DD$" /vb /comp:14
[3/6/2013 7:16:24 PM] PHYLock is waiting for drive writing to stop ...
[3/6/2013 7:16:52 PM] PHYLock using drive C:
[3/6/2013 7:16:52 PM] PHYLock Started
[3/6/2013 7:16:52 PM] PHYLock Using Disk
[3/6/2013 7:16:52 PM] PHYLock version 10
[3/6/2013 7:17:01 PM] Backup: Drive 0 EFI Partition (01) 200 MiB EFI System
[3/6/2013 7:17:01 PM] To: F:\RESTORE\2013-03-06.TBI
[3/6/2013 7:17:01 PM] INFO: Total Sectors:409600 Total Allocated:37582
[3/6/2013 7:17:01 PM] INFO: 37582 Sector(s) backed up
[3/6/2013 7:17:01 PM] Backup: Drive 0 (E:) Untitled 1 Partition (02) 312805 MiB OS X
[3/6/2013 7:17:01 PM] To: F:\RESTORE\2013-03-06.TBI
[3/6/2013 7:22:19 PM] INFO: Total Sectors:640625024 Total Allocated:56178760
[3/6/2013 7:22:19 PM] INFO: 56178760 Sector(s) backed up
[3/6/2013 7:22:19 PM] Backup: Drive 0 Recovery HD Partition (03) 620 MiB OS X
[3/6/2013 7:22:19 PM] To: F:\RESTORE\2013-03-06.TBI
[3/6/2013 7:22:25 PM] INFO: Total Sectors:1269536 Total Allocated:998232
[3/6/2013 7:22:25 PM] INFO: 998232 Sector(s) backed up
[3/6/2013 7:22:25 PM] Backup: Drive 0 (C:) BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/6/2013 7:22:25 PM] To: F:\RESTORE\2013-03-06.TBI
[3/6/2013 7:26:14 PM] INFO: Total Sectors:822841344 Total Allocated:46101904
[3/6/2013 7:26:14 PM] INFO: 38142920 Sector(s) backed up
[3/6/2013 7:26:15 PM] Validating: EFI Partition (01) 200 MiB EFI System
[3/6/2013 7:26:15 PM] From: F:\RESTORE\2013-03-06.TBI
[3/6/2013 7:26:15 PM] Validating: Untitled 1 Partition (02) 312805 MiB OS X
[3/6/2013 7:26:15 PM] From: F:\RESTORE\2013-03-06.TBI
[3/6/2013 7:35:55 PM] Validating: Recovery HD Partition (03) 620 MiB OS X
[3/6/2013 7:35:55 PM] From: F:\RESTORE\2013-03-06.TBI
[3/6/2013 7:36:05 PM] Validating: BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/6/2013 7:36:05 PM] From: F:\RESTORE\2013-03-06.TBI
[3/6/2013 7:41:48 PM] Operation Completed with Error Code 0
[3/6/2013 7:41:48 PM] Stop
--------------------------------------------------------------------------
[3/7/2013 1:48:30 PM] /b /d:w0 /f:F:\RESTORE\$~YYYY$-$~MM$-$~DD$ /comp:14 /vb
[3/7/2013 1:48:30 PM] Path not found
[3/7/2013 1:48:32 PM] Program exiting with error code 13
--------------------------------------------------------------------------
[3/7/2013 1:49:25 PM] /b /d:w0 /f:F:\RESTORE\$~YYYY$-$~MM$-$~DD$ /comp:14 /vb
[3/7/2013 1:49:25 PM] Image for Windows 2.80 (GUI)
[3/7/2013 1:49:25 PM] Starting ...
imagew.exe /b /d:w0 /f:"F:\RESTORE\$~YYYY$-$~MM$-$~DD$" /vb /comp:14
[3/7/2013 1:49:25 PM] PHYLock is waiting for drive writing to stop ...
[3/7/2013 1:49:48 PM] PHYLock using drive C:
[3/7/2013 1:49:48 PM] PHYLock Started
[3/7/2013 1:49:48 PM] PHYLock Using Disk
[3/7/2013 1:49:48 PM] PHYLock version 10
[3/7/2013 1:49:57 PM] Backup: Drive 0 EFI Partition (01) 200 MiB EFI System
[3/7/2013 1:49:57 PM] To: F:\RESTORE\2013-03-07.TBI
[3/7/2013 1:49:57 PM] INFO: Total Sectors:409600 Total Allocated:37582
[3/7/2013 1:49:57 PM] INFO: 37582 Sector(s) backed up
[3/7/2013 1:49:57 PM] Backup: Drive 0 (E:) Untitled 1 Partition (02) 312805 MiB OS X
[3/7/2013 1:49:57 PM] To: F:\RESTORE\2013-03-07.TBI
[3/7/2013 1:55:43 PM] INFO: Total Sectors:640625024 Total Allocated:56176464
[3/7/2013 1:55:43 PM] INFO: 56176464 Sector(s) backed up
[3/7/2013 1:55:43 PM] Backup: Drive 0 Recovery HD Partition (03) 620 MiB OS X
[3/7/2013 1:55:43 PM] To: F:\RESTORE\2013-03-07.TBI
[3/7/2013 1:55:49 PM] INFO: Total Sectors:1269536 Total Allocated:998232
[3/7/2013 1:55:49 PM] INFO: 998232 Sector(s) backed up
[3/7/2013 1:55:49 PM] Backup: Drive 0 (C:) BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/7/2013 1:55:49 PM] To: F:\RESTORE\2013-03-07.TBI
[3/7/2013 2:00:15 PM] INFO: Total Sectors:822841344 Total Allocated:47862368
[3/7/2013 2:00:15 PM] INFO: 39903384 Sector(s) backed up
[3/7/2013 2:00:17 PM] Validating: EFI Partition (01) 200 MiB EFI System
[3/7/2013 2:00:17 PM] From: F:\RESTORE\2013-03-07.TBI
[3/7/2013 2:00:17 PM] Validating: Untitled 1 Partition (02) 312805 MiB OS X
[3/7/2013 2:00:17 PM] From: F:\RESTORE\2013-03-07.TBI
[3/7/2013 2:10:12 PM] Validating: Recovery HD Partition (03) 620 MiB OS X
[3/7/2013 2:10:12 PM] From: F:\RESTORE\2013-03-07.TBI
[3/7/2013 2:10:22 PM] Validating: BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/7/2013 2:10:22 PM] From: F:\RESTORE\2013-03-07.TBI
[3/7/2013 2:16:21 PM] Operation Completed with Error Code 0
[3/7/2013 2:16:21 PM] Stop
--------------------------------------------------------------------------
[3/9/2013 1:49:56 PM] /b /d:w0 /f:F:\RESTORE\$~YYYY$-$~MM$-$~DD$ /comp:14 /vb
[3/9/2013 1:49:56 PM] Image for Windows 2.80 (GUI)
[3/9/2013 1:49:56 PM] Starting ...
imagew.exe /b /d:w0 /f:"F:\RESTORE\$~YYYY$-$~MM$-$~DD$" /vb /comp:14
[3/9/2013 1:49:57 PM] PHYLock is waiting for drive writing to stop ...
[3/9/2013 1:50:21 PM] PHYLock using drive C:
[3/9/2013 1:50:21 PM] PHYLock Started
[3/9/2013 1:50:21 PM] PHYLock Using Disk
[3/9/2013 1:50:21 PM] PHYLock version 10
[3/9/2013 1:50:30 PM] Backup: Drive 0 EFI Partition (01) 200 MiB EFI System
[3/9/2013 1:50:30 PM] To: F:\RESTORE\2013-03-09.TBI
[3/9/2013 1:50:31 PM] INFO: Total Sectors:409600 Total Allocated:37582
[3/9/2013 1:50:31 PM] INFO: 37582 Sector(s) backed up
[3/9/2013 1:50:31 PM] Backup: Drive 0 (E:) Untitled 1 Partition (02) 312805 MiB OS X
[3/9/2013 1:50:31 PM] To: F:\RESTORE\2013-03-09.TBI
[3/9/2013 1:55:46 PM] INFO: Total Sectors:640625024 Total Allocated:56185136
[3/9/2013 1:55:46 PM] INFO: 56185136 Sector(s) backed up
[3/9/2013 1:55:46 PM] Backup: Drive 0 Recovery HD Partition (03) 620 MiB OS X
[3/9/2013 1:55:46 PM] To: F:\RESTORE\2013-03-09.TBI
[3/9/2013 1:55:51 PM] INFO: Total Sectors:1269536 Total Allocated:998232
[3/9/2013 1:55:51 PM] INFO: 998232 Sector(s) backed up
[3/9/2013 1:55:51 PM] Backup: Drive 0 (C:) BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/9/2013 1:55:51 PM] To: F:\RESTORE\2013-03-09.TBI
[3/9/2013 2:00:14 PM] INFO: Total Sectors:822841344 Total Allocated:51516952
[3/9/2013 2:00:14 PM] INFO: 43557968 Sector(s) backed up
[3/9/2013 2:00:15 PM] Validating: EFI Partition (01) 200 MiB EFI System
[3/9/2013 2:00:15 PM] From: F:\RESTORE\2013-03-09.TBI
[3/9/2013 2:00:15 PM] Validating: Untitled 1 Partition (02) 312805 MiB OS X
[3/9/2013 2:00:15 PM] From: F:\RESTORE\2013-03-09.TBI
[3/9/2013 2:11:11 PM] Validating: Recovery HD Partition (03) 620 MiB OS X
[3/9/2013 2:11:11 PM] From: F:\RESTORE\2013-03-09.TBI
[3/9/2013 2:11:21 PM] Validating: BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/9/2013 2:11:21 PM] From: F:\RESTORE\2013-03-09.TBI
[3/9/2013 2:17:48 PM] Operation Completed with Error Code 0
[3/9/2013 2:17:48 PM] Stop
--------------------------------------------------------------------------
[3/9/2013 3:09:22 PM] /b /d:w0 /f:F:\RESTORE\$~YYYY$-$~MM$-$~DD$ /comp:14 /vb
[3/9/2013 3:09:33 PM] File already exists.
[3/9/2013 3:09:36 PM] Program exiting with error code 62
--------------------------------------------------------------------------
[3/11/2013 8:19:29 PM] Image for Windows 2.80 (GUI)
[3/11/2013 8:19:29 PM] Starting ...
imagew.exe /r /d:w2 /f:"P:\RESTORE\2013-03-09" /vb /rft
[3/11/2013 8:19:30 PM] Restoring: EFI Partition (01) 200 MiB EFI System
[3/11/2013 8:19:30 PM] To: Drive 2 (T:) ------- Partition (80) 953868 MiB Free Space
[3/11/2013 8:19:30 PM] From: P:\RESTORE\2013-03-09.TBI
[3/11/2013 8:19:31 PM] Validating: EFI Partition (01) 200 MiB EFI System
[3/11/2013 8:19:31 PM] From: P:\RESTORE\2013-03-09.TBI
[3/11/2013 8:19:32 PM] Restoring: Untitled 1 Partition (02) 312805 MiB OS X
[3/11/2013 8:19:32 PM] To: Drive 2 ------- Partition (80) 953668 MiB Free Space
[3/11/2013 8:19:32 PM] From: P:\RESTORE\2013-03-09.TBI
[3/11/2013 8:27:08 PM] Validating: Untitled 1 Partition (02) 312805 MiB OS X
[3/11/2013 8:27:08 PM] From: P:\RESTORE\2013-03-09.TBI
[3/11/2013 8:33:14 PM] Restoring: Recovery HD Partition (03) 620 MiB OS X
[3/11/2013 8:33:14 PM] To: Drive 2 ------- Partition (80) 640863 MiB Free Space
[3/11/2013 8:33:14 PM] From: P:\RESTORE\2013-03-09.TBI
[3/11/2013 8:33:27 PM] Validating: Recovery HD Partition (03) 620 MiB OS X
[3/11/2013 8:33:27 PM] From: P:\RESTORE\2013-03-09.TBI
[3/11/2013 8:33:32 PM] Restoring: BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/11/2013 8:33:32 PM] To: Drive 2 ------- Partition (80) 640243 MiB Free Space
[3/11/2013 8:33:32 PM] From: P:\RESTORE\2013-03-09.TBI
[3/11/2013 8:38:32 PM] Validating: BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/11/2013 8:38:32 PM] From: P:\RESTORE\2013-03-09.TBI
[3/11/2013 8:42:52 PM] Operation Completed with Error Code 0
[3/11/2013 8:42:52 PM] Stop
--------------------------------------------------------------------------
[3/20/2013 7:26:47 PM] /b /d:w0 /f:F:\RESTORE\$~YYYY$-$~MM$-$~DD$ /comp:14 /vb
[3/20/2013 7:26:48 PM] Image for Windows 2.80 (GUI)
[3/20/2013 7:26:48 PM] Starting ...
imagew.exe /b /d:w0 /f:"F:\RESTORE\$~YYYY$-$~MM$-$~DD$" /vb /comp:14
[3/20/2013 7:26:48 PM] PHYLock is waiting for drive writing to stop ...
[3/20/2013 7:26:56 PM] Are you sure you want to cancel?
[3/20/2013 7:26:58 PM] PHYLock Failed to Start
[3/20/2013 7:26:58 PM] Deleting incomplete or failed backup.
[3/20/2013 7:26:58 PM] Operation Completed with Error Code 1
[3/20/2013 7:26:58 PM] Stop
--------------------------------------------------------------------------
[3/20/2013 7:28:28 PM] /b /d:w0 /f:F:\RESTORE\$~YYYY$-$~MM$-$~DD$ /comp:14 /vb
[3/20/2013 7:28:28 PM] Image for Windows 2.80 (GUI)
[3/20/2013 7:28:28 PM] Starting ...
imagew.exe /b /d:w0 /f:"F:\RESTORE\$~YYYY$-$~MM$-$~DD$" /vb /comp:14
[3/20/2013 7:28:29 PM] PHYLock is waiting for drive writing to stop ...
[3/20/2013 7:28:46 PM] PHYLock Started
[3/20/2013 7:28:46 PM] PHYLock Using RAM
[3/20/2013 7:28:46 PM] PHYLock version 10
[3/20/2013 7:28:53 PM] Backup: Drive 0 EFI Partition (01) 200 MiB EFI System
[3/20/2013 7:28:53 PM] To: F:\RESTORE\2013-03-20.TBI
[3/20/2013 7:28:54 PM] INFO: Total Sectors:409600 Total Allocated:37582
[3/20/2013 7:28:54 PM] INFO: 37582 Sector(s) backed up
[3/20/2013 7:28:54 PM] Backup: Drive 0 (E:) Untitled 1 Partition (02) 312805 MiB OS X
[3/20/2013 7:28:54 PM] To: F:\RESTORE\2013-03-20.TBI
[3/20/2013 7:34:39 PM] INFO: Total Sectors:640625024 Total Allocated:56187224
[3/20/2013 7:34:39 PM] INFO: 56187224 Sector(s) backed up
[3/20/2013 7:34:39 PM] Backup: Drive 0 Recovery HD Partition (03) 620 MiB OS X
[3/20/2013 7:34:39 PM] To: F:\RESTORE\2013-03-20.TBI
[3/20/2013 7:34:47 PM] INFO: Total Sectors:1269536 Total Allocated:998232
[3/20/2013 7:34:47 PM] INFO: 998232 Sector(s) backed up
[3/20/2013 7:34:47 PM] Backup: Drive 0 (C:) BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/20/2013 7:34:47 PM] To: F:\RESTORE\2013-03-20.TBI
[3/20/2013 8:11:03 PM] PHYLock Error 0002h
[3/20/2013 8:11:03 PM] INFO: Total Sectors:822841344 Total Allocated:393264560
[3/20/2013 8:11:04 PM] Deleting incomplete or failed backup.
[3/20/2013 8:11:04 PM] Deleting F:\RESTORE\2013-03-20.TBI
[3/20/2013 8:11:05 PM] Operation Completed with Error Code 204
[3/20/2013 8:11:05 PM] PHYLock failed to cache all changes. Please increase the cache size in settings.
[3/20/2013 8:19:16 PM] Stop
> Alan,
>
> Can you post the ifw.log for that operation?
>
>
here tis. this log goes back to about the sixth when I first installed
IFW. note satisfactory images back then
--------------------------------------------------------------------------
[3/6/2013 5:35:45 PM] Image for Windows 2.80 (GUI)
[3/6/2013 5:35:45 PM] Starting ...
imagew.exe.exe /b /d:w0 /f:"F:\Backup-w0-$~YYYY$-$~MM$-$~DD$-$~HHMM$" /vb
[3/6/2013 5:35:45 PM] PHYLock is waiting for drive writing to stop ...
[3/6/2013 5:35:57 PM] PHYLock using drive C:
[3/6/2013 5:35:57 PM] PHYLock Started
[3/6/2013 5:35:57 PM] PHYLock Using Disk
[3/6/2013 5:35:57 PM] PHYLock version 10
[3/6/2013 5:36:06 PM] Backup: Drive 0 EFI Partition (01) 200 MiB EFI System
[3/6/2013 5:36:06 PM] To: F:\Backup-w0-2013-03-06-1733.TBI
[3/6/2013 5:36:06 PM] INFO: Total Sectors:409600 Total Allocated:37582
[3/6/2013 5:36:06 PM] INFO: 37582 Sector(s) backed up
[3/6/2013 5:36:06 PM] Backup: Drive 0 (E:) Untitled 1 Partition (02) 312805 MiB OS X
[3/6/2013 5:36:06 PM] To: F:\Backup-w0-2013-03-06-1733.TBI
[3/6/2013 5:42:42 PM] INFO: Total Sectors:640625024 Total Allocated:56178760
[3/6/2013 5:42:42 PM] INFO: 56178760 Sector(s) backed up
[3/6/2013 5:42:42 PM] Backup: Drive 0 Recovery HD Partition (03) 620 MiB OS X
[3/6/2013 5:42:42 PM] To: F:\Backup-w0-2013-03-06-1733.TBI
[3/6/2013 5:42:50 PM] INFO: Total Sectors:1269536 Total Allocated:998232
[3/6/2013 5:42:50 PM] INFO: 998232 Sector(s) backed up
[3/6/2013 5:42:50 PM] Backup: Drive 0 (C:) BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/6/2013 5:42:50 PM] To: F:\Backup-w0-2013-03-06-1733.TBI
[3/6/2013 5:48:27 PM] INFO: Total Sectors:822841344 Total Allocated:46102184
[3/6/2013 5:48:27 PM] INFO: 38143200 Sector(s) backed up
[3/6/2013 5:48:28 PM] Validating: EFI Partition (01) 200 MiB EFI System
[3/6/2013 5:48:28 PM] From: F:\Backup-w0-2013-03-06-1733.TBI
[3/6/2013 5:48:29 PM] Validating: Untitled 1 Partition (02) 312805 MiB OS X
[3/6/2013 5:48:29 PM] From: F:\Backup-w0-2013-03-06-1733.TBI
[3/6/2013 5:56:53 PM] Validating: Recovery HD Partition (03) 620 MiB OS X
[3/6/2013 5:56:53 PM] From: F:\Backup-w0-2013-03-06-1733.TBI
[3/6/2013 5:57:03 PM] Validating: BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/6/2013 5:57:03 PM] From: F:\Backup-w0-2013-03-06-1733.TBI
[3/6/2013 6:03:12 PM] Operation Completed with Error Code 0
[3/6/2013 6:03:12 PM] Stop
--------------------------------------------------------------------------
[3/6/2013 7:16:24 PM] /b /d:w0 /f:F:\RESTORE\$~YYYY$-$~MM$-$~DD$ /comp:14 /vb
[3/6/2013 7:16:24 PM] Image for Windows 2.80 (GUI)
[3/6/2013 7:16:24 PM] Starting ...
imagew.exe.exe /b /d:w0 /f:"F:\RESTORE\$~YYYY$-$~MM$-$~DD$" /vb /comp:14
[3/6/2013 7:16:24 PM] PHYLock is waiting for drive writing to stop ...
[3/6/2013 7:16:52 PM] PHYLock using drive C:
[3/6/2013 7:16:52 PM] PHYLock Started
[3/6/2013 7:16:52 PM] PHYLock Using Disk
[3/6/2013 7:16:52 PM] PHYLock version 10
[3/6/2013 7:17:01 PM] Backup: Drive 0 EFI Partition (01) 200 MiB EFI System
[3/6/2013 7:17:01 PM] To: F:\RESTORE\2013-03-06.TBI
[3/6/2013 7:17:01 PM] INFO: Total Sectors:409600 Total Allocated:37582
[3/6/2013 7:17:01 PM] INFO: 37582 Sector(s) backed up
[3/6/2013 7:17:01 PM] Backup: Drive 0 (E:) Untitled 1 Partition (02) 312805 MiB OS X
[3/6/2013 7:17:01 PM] To: F:\RESTORE\2013-03-06.TBI
[3/6/2013 7:22:19 PM] INFO: Total Sectors:640625024 Total Allocated:56178760
[3/6/2013 7:22:19 PM] INFO: 56178760 Sector(s) backed up
[3/6/2013 7:22:19 PM] Backup: Drive 0 Recovery HD Partition (03) 620 MiB OS X
[3/6/2013 7:22:19 PM] To: F:\RESTORE\2013-03-06.TBI
[3/6/2013 7:22:25 PM] INFO: Total Sectors:1269536 Total Allocated:998232
[3/6/2013 7:22:25 PM] INFO: 998232 Sector(s) backed up
[3/6/2013 7:22:25 PM] Backup: Drive 0 (C:) BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/6/2013 7:22:25 PM] To: F:\RESTORE\2013-03-06.TBI
[3/6/2013 7:26:14 PM] INFO: Total Sectors:822841344 Total Allocated:46101904
[3/6/2013 7:26:14 PM] INFO: 38142920 Sector(s) backed up
[3/6/2013 7:26:15 PM] Validating: EFI Partition (01) 200 MiB EFI System
[3/6/2013 7:26:15 PM] From: F:\RESTORE\2013-03-06.TBI
[3/6/2013 7:26:15 PM] Validating: Untitled 1 Partition (02) 312805 MiB OS X
[3/6/2013 7:26:15 PM] From: F:\RESTORE\2013-03-06.TBI
[3/6/2013 7:35:55 PM] Validating: Recovery HD Partition (03) 620 MiB OS X
[3/6/2013 7:35:55 PM] From: F:\RESTORE\2013-03-06.TBI
[3/6/2013 7:36:05 PM] Validating: BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/6/2013 7:36:05 PM] From: F:\RESTORE\2013-03-06.TBI
[3/6/2013 7:41:48 PM] Operation Completed with Error Code 0
[3/6/2013 7:41:48 PM] Stop
--------------------------------------------------------------------------
[3/7/2013 1:48:30 PM] /b /d:w0 /f:F:\RESTORE\$~YYYY$-$~MM$-$~DD$ /comp:14 /vb
[3/7/2013 1:48:30 PM] Path not found
[3/7/2013 1:48:32 PM] Program exiting with error code 13
--------------------------------------------------------------------------
[3/7/2013 1:49:25 PM] /b /d:w0 /f:F:\RESTORE\$~YYYY$-$~MM$-$~DD$ /comp:14 /vb
[3/7/2013 1:49:25 PM] Image for Windows 2.80 (GUI)
[3/7/2013 1:49:25 PM] Starting ...
imagew.exe /b /d:w0 /f:"F:\RESTORE\$~YYYY$-$~MM$-$~DD$" /vb /comp:14
[3/7/2013 1:49:25 PM] PHYLock is waiting for drive writing to stop ...
[3/7/2013 1:49:48 PM] PHYLock using drive C:
[3/7/2013 1:49:48 PM] PHYLock Started
[3/7/2013 1:49:48 PM] PHYLock Using Disk
[3/7/2013 1:49:48 PM] PHYLock version 10
[3/7/2013 1:49:57 PM] Backup: Drive 0 EFI Partition (01) 200 MiB EFI System
[3/7/2013 1:49:57 PM] To: F:\RESTORE\2013-03-07.TBI
[3/7/2013 1:49:57 PM] INFO: Total Sectors:409600 Total Allocated:37582
[3/7/2013 1:49:57 PM] INFO: 37582 Sector(s) backed up
[3/7/2013 1:49:57 PM] Backup: Drive 0 (E:) Untitled 1 Partition (02) 312805 MiB OS X
[3/7/2013 1:49:57 PM] To: F:\RESTORE\2013-03-07.TBI
[3/7/2013 1:55:43 PM] INFO: Total Sectors:640625024 Total Allocated:56176464
[3/7/2013 1:55:43 PM] INFO: 56176464 Sector(s) backed up
[3/7/2013 1:55:43 PM] Backup: Drive 0 Recovery HD Partition (03) 620 MiB OS X
[3/7/2013 1:55:43 PM] To: F:\RESTORE\2013-03-07.TBI
[3/7/2013 1:55:49 PM] INFO: Total Sectors:1269536 Total Allocated:998232
[3/7/2013 1:55:49 PM] INFO: 998232 Sector(s) backed up
[3/7/2013 1:55:49 PM] Backup: Drive 0 (C:) BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/7/2013 1:55:49 PM] To: F:\RESTORE\2013-03-07.TBI
[3/7/2013 2:00:15 PM] INFO: Total Sectors:822841344 Total Allocated:47862368
[3/7/2013 2:00:15 PM] INFO: 39903384 Sector(s) backed up
[3/7/2013 2:00:17 PM] Validating: EFI Partition (01) 200 MiB EFI System
[3/7/2013 2:00:17 PM] From: F:\RESTORE\2013-03-07.TBI
[3/7/2013 2:00:17 PM] Validating: Untitled 1 Partition (02) 312805 MiB OS X
[3/7/2013 2:00:17 PM] From: F:\RESTORE\2013-03-07.TBI
[3/7/2013 2:10:12 PM] Validating: Recovery HD Partition (03) 620 MiB OS X
[3/7/2013 2:10:12 PM] From: F:\RESTORE\2013-03-07.TBI
[3/7/2013 2:10:22 PM] Validating: BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/7/2013 2:10:22 PM] From: F:\RESTORE\2013-03-07.TBI
[3/7/2013 2:16:21 PM] Operation Completed with Error Code 0
[3/7/2013 2:16:21 PM] Stop
--------------------------------------------------------------------------
[3/9/2013 1:49:56 PM] /b /d:w0 /f:F:\RESTORE\$~YYYY$-$~MM$-$~DD$ /comp:14 /vb
[3/9/2013 1:49:56 PM] Image for Windows 2.80 (GUI)
[3/9/2013 1:49:56 PM] Starting ...
imagew.exe /b /d:w0 /f:"F:\RESTORE\$~YYYY$-$~MM$-$~DD$" /vb /comp:14
[3/9/2013 1:49:57 PM] PHYLock is waiting for drive writing to stop ...
[3/9/2013 1:50:21 PM] PHYLock using drive C:
[3/9/2013 1:50:21 PM] PHYLock Started
[3/9/2013 1:50:21 PM] PHYLock Using Disk
[3/9/2013 1:50:21 PM] PHYLock version 10
[3/9/2013 1:50:30 PM] Backup: Drive 0 EFI Partition (01) 200 MiB EFI System
[3/9/2013 1:50:30 PM] To: F:\RESTORE\2013-03-09.TBI
[3/9/2013 1:50:31 PM] INFO: Total Sectors:409600 Total Allocated:37582
[3/9/2013 1:50:31 PM] INFO: 37582 Sector(s) backed up
[3/9/2013 1:50:31 PM] Backup: Drive 0 (E:) Untitled 1 Partition (02) 312805 MiB OS X
[3/9/2013 1:50:31 PM] To: F:\RESTORE\2013-03-09.TBI
[3/9/2013 1:55:46 PM] INFO: Total Sectors:640625024 Total Allocated:56185136
[3/9/2013 1:55:46 PM] INFO: 56185136 Sector(s) backed up
[3/9/2013 1:55:46 PM] Backup: Drive 0 Recovery HD Partition (03) 620 MiB OS X
[3/9/2013 1:55:46 PM] To: F:\RESTORE\2013-03-09.TBI
[3/9/2013 1:55:51 PM] INFO: Total Sectors:1269536 Total Allocated:998232
[3/9/2013 1:55:51 PM] INFO: 998232 Sector(s) backed up
[3/9/2013 1:55:51 PM] Backup: Drive 0 (C:) BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/9/2013 1:55:51 PM] To: F:\RESTORE\2013-03-09.TBI
[3/9/2013 2:00:14 PM] INFO: Total Sectors:822841344 Total Allocated:51516952
[3/9/2013 2:00:14 PM] INFO: 43557968 Sector(s) backed up
[3/9/2013 2:00:15 PM] Validating: EFI Partition (01) 200 MiB EFI System
[3/9/2013 2:00:15 PM] From: F:\RESTORE\2013-03-09.TBI
[3/9/2013 2:00:15 PM] Validating: Untitled 1 Partition (02) 312805 MiB OS X
[3/9/2013 2:00:15 PM] From: F:\RESTORE\2013-03-09.TBI
[3/9/2013 2:11:11 PM] Validating: Recovery HD Partition (03) 620 MiB OS X
[3/9/2013 2:11:11 PM] From: F:\RESTORE\2013-03-09.TBI
[3/9/2013 2:11:21 PM] Validating: BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/9/2013 2:11:21 PM] From: F:\RESTORE\2013-03-09.TBI
[3/9/2013 2:17:48 PM] Operation Completed with Error Code 0
[3/9/2013 2:17:48 PM] Stop
--------------------------------------------------------------------------
[3/9/2013 3:09:22 PM] /b /d:w0 /f:F:\RESTORE\$~YYYY$-$~MM$-$~DD$ /comp:14 /vb
[3/9/2013 3:09:33 PM] File already exists.
[3/9/2013 3:09:36 PM] Program exiting with error code 62
--------------------------------------------------------------------------
[3/11/2013 8:19:29 PM] Image for Windows 2.80 (GUI)
[3/11/2013 8:19:29 PM] Starting ...
imagew.exe /r /d:w2 /f:"P:\RESTORE\2013-03-09" /vb /rft
[3/11/2013 8:19:30 PM] Restoring: EFI Partition (01) 200 MiB EFI System
[3/11/2013 8:19:30 PM] To: Drive 2 (T:) ------- Partition (80) 953868 MiB Free Space
[3/11/2013 8:19:30 PM] From: P:\RESTORE\2013-03-09.TBI
[3/11/2013 8:19:31 PM] Validating: EFI Partition (01) 200 MiB EFI System
[3/11/2013 8:19:31 PM] From: P:\RESTORE\2013-03-09.TBI
[3/11/2013 8:19:32 PM] Restoring: Untitled 1 Partition (02) 312805 MiB OS X
[3/11/2013 8:19:32 PM] To: Drive 2 ------- Partition (80) 953668 MiB Free Space
[3/11/2013 8:19:32 PM] From: P:\RESTORE\2013-03-09.TBI
[3/11/2013 8:27:08 PM] Validating: Untitled 1 Partition (02) 312805 MiB OS X
[3/11/2013 8:27:08 PM] From: P:\RESTORE\2013-03-09.TBI
[3/11/2013 8:33:14 PM] Restoring: Recovery HD Partition (03) 620 MiB OS X
[3/11/2013 8:33:14 PM] To: Drive 2 ------- Partition (80) 640863 MiB Free Space
[3/11/2013 8:33:14 PM] From: P:\RESTORE\2013-03-09.TBI
[3/11/2013 8:33:27 PM] Validating: Recovery HD Partition (03) 620 MiB OS X
[3/11/2013 8:33:27 PM] From: P:\RESTORE\2013-03-09.TBI
[3/11/2013 8:33:32 PM] Restoring: BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/11/2013 8:33:32 PM] To: Drive 2 ------- Partition (80) 640243 MiB Free Space
[3/11/2013 8:33:32 PM] From: P:\RESTORE\2013-03-09.TBI
[3/11/2013 8:38:32 PM] Validating: BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/11/2013 8:38:32 PM] From: P:\RESTORE\2013-03-09.TBI
[3/11/2013 8:42:52 PM] Operation Completed with Error Code 0
[3/11/2013 8:42:52 PM] Stop
--------------------------------------------------------------------------
[3/20/2013 7:26:47 PM] /b /d:w0 /f:F:\RESTORE\$~YYYY$-$~MM$-$~DD$ /comp:14 /vb
[3/20/2013 7:26:48 PM] Image for Windows 2.80 (GUI)
[3/20/2013 7:26:48 PM] Starting ...
imagew.exe /b /d:w0 /f:"F:\RESTORE\$~YYYY$-$~MM$-$~DD$" /vb /comp:14
[3/20/2013 7:26:48 PM] PHYLock is waiting for drive writing to stop ...
[3/20/2013 7:26:56 PM] Are you sure you want to cancel?
[3/20/2013 7:26:58 PM] PHYLock Failed to Start
[3/20/2013 7:26:58 PM] Deleting incomplete or failed backup.
[3/20/2013 7:26:58 PM] Operation Completed with Error Code 1
[3/20/2013 7:26:58 PM] Stop
--------------------------------------------------------------------------
[3/20/2013 7:28:28 PM] /b /d:w0 /f:F:\RESTORE\$~YYYY$-$~MM$-$~DD$ /comp:14 /vb
[3/20/2013 7:28:28 PM] Image for Windows 2.80 (GUI)
[3/20/2013 7:28:28 PM] Starting ...
imagew.exe /b /d:w0 /f:"F:\RESTORE\$~YYYY$-$~MM$-$~DD$" /vb /comp:14
[3/20/2013 7:28:29 PM] PHYLock is waiting for drive writing to stop ...
[3/20/2013 7:28:46 PM] PHYLock Started
[3/20/2013 7:28:46 PM] PHYLock Using RAM
[3/20/2013 7:28:46 PM] PHYLock version 10
[3/20/2013 7:28:53 PM] Backup: Drive 0 EFI Partition (01) 200 MiB EFI System
[3/20/2013 7:28:53 PM] To: F:\RESTORE\2013-03-20.TBI
[3/20/2013 7:28:54 PM] INFO: Total Sectors:409600 Total Allocated:37582
[3/20/2013 7:28:54 PM] INFO: 37582 Sector(s) backed up
[3/20/2013 7:28:54 PM] Backup: Drive 0 (E:) Untitled 1 Partition (02) 312805 MiB OS X
[3/20/2013 7:28:54 PM] To: F:\RESTORE\2013-03-20.TBI
[3/20/2013 7:34:39 PM] INFO: Total Sectors:640625024 Total Allocated:56187224
[3/20/2013 7:34:39 PM] INFO: 56187224 Sector(s) backed up
[3/20/2013 7:34:39 PM] Backup: Drive 0 Recovery HD Partition (03) 620 MiB OS X
[3/20/2013 7:34:39 PM] To: F:\RESTORE\2013-03-20.TBI
[3/20/2013 7:34:47 PM] INFO: Total Sectors:1269536 Total Allocated:998232
[3/20/2013 7:34:47 PM] INFO: 998232 Sector(s) backed up
[3/20/2013 7:34:47 PM] Backup: Drive 0 (C:) BOOTCAMP Partition (04) 401778 MiB HPFS/NTFS
[3/20/2013 7:34:47 PM] To: F:\RESTORE\2013-03-20.TBI
[3/20/2013 8:11:03 PM] PHYLock Error 0002h
[3/20/2013 8:11:03 PM] INFO: Total Sectors:822841344 Total Allocated:393264560
[3/20/2013 8:11:04 PM] Deleting incomplete or failed backup.
[3/20/2013 8:11:04 PM] Deleting F:\RESTORE\2013-03-20.TBI
[3/20/2013 8:11:05 PM] Operation Completed with Error Code 204
[3/20/2013 8:11:05 PM] PHYLock failed to cache all changes. Please increase the cache size in settings.
[3/20/2013 8:19:16 PM] Stop
Re: Phylock Cache Size Issue
On 2013-03-20 8:53 PM, TeraByte Support wrote:
> you look in ifw.log to see the phylock error code then see
> http://www.terabyteunlimited.com/kb/article.php?id=551
>
> (you also need to ensure everything is clean via chkdsk /f - and you don't
> want to run while defragging and sometimes indexing can cause a lot of
> changes if new system). You can use VSS as well, but since that doesn't
> cache everything backed up you'd have to use validate and not validate
> byte-for-byte.
>
> "AlanD" wrote in message news:[email protected]...
>
> One hour and 10 minutes into an IFW image/validate operation (just
> started validation), I get this message: PHYLock failed to cache all
> changes. Please increase the cache size in settings.
>
> Am using IFW V 2.80, latest Phylock version also installed. Imaging
> complete drive (four partitions - MAC and Bootcamp)
>
> Of course this aborted the whole effort (color me very ticked off)!
>
> Not sure where to attack this. Does KB article 323 apply with WIN 7?
>
> In three years, I have never seen this before on my PC, just been using
> whatever settings are default.
>
> AlanD
>
>
I saw and understand > PHYLock Error 0002h, but I can't find
instructions for increasing it.
With trial and error to determine sufficient size, and with the error
taking over an hour to show up, there's lot's of wasted time here.
The disk was chkdsk'd, no defragging going on, indexing has been pretty
quiet of late, but on other hand have never turned it off in my PC.
Also, is the completion error code 204 significant?
> you look in ifw.log to see the phylock error code then see
> http://www.terabyteunlimited.com/kb/article.php?id=551
>
> (you also need to ensure everything is clean via chkdsk /f - and you don't
> want to run while defragging and sometimes indexing can cause a lot of
> changes if new system). You can use VSS as well, but since that doesn't
> cache everything backed up you'd have to use validate and not validate
> byte-for-byte.
>
> "AlanD" wrote in message news:[email protected]...
>
> One hour and 10 minutes into an IFW image/validate operation (just
> started validation), I get this message: PHYLock failed to cache all
> changes. Please increase the cache size in settings.
>
> Am using IFW V 2.80, latest Phylock version also installed. Imaging
> complete drive (four partitions - MAC and Bootcamp)
>
> Of course this aborted the whole effort (color me very ticked off)!
>
> Not sure where to attack this. Does KB article 323 apply with WIN 7?
>
> In three years, I have never seen this before on my PC, just been using
> whatever settings are default.
>
> AlanD
>
>
I saw and understand > PHYLock Error 0002h, but I can't find
instructions for increasing it.
With trial and error to determine sufficient size, and with the error
taking over an hour to show up, there's lot's of wasted time here.
The disk was chkdsk'd, no defragging going on, indexing has been pretty
quiet of late, but on other hand have never turned it off in my PC.
Also, is the completion error code 204 significant?
-
TeraByte Support(PP)
- Posts: 1775
- Joined: Fri Aug 12, 2011 12:51 am
Re: Phylock Cache Size Issue
When you start IFW, click the Settings button. You can adjust the size of the PHYLock RAM Cache there. Since you've been running okay for a while with the default value I'd just try increasing it 2048 (to 10240) and see how it goes.
The backup created was automatically deleted because of the error. You can turn that option off if you want to keep failed backups (in Settings, Retain Failed Backups). There's a good chance the file is not valid, though.
204 indicates a PHYLock Cache error.
The backup created was automatically deleted because of the error. You can turn that option off if you want to keep failed backups (in Settings, Retain Failed Backups). There's a good chance the file is not valid, though.
204 indicates a PHYLock Cache error.
-
TeraByte Support
- Posts: 4105
- Joined: Thu May 05, 2011 10:37 pm
Re: Phylock Cache Size Issue
[3/20/2013 7:28:46 PM] PHYLock Using RAM
Because for some reason it used RAM and not Disk for caching - did you
disable the disk caching in settings?
Because for some reason it used RAM and not Disk for caching - did you
disable the disk caching in settings?
Re: Phylock Cache Size Issue
On 2013-03-21 1:46 AM, TeraByte Support wrote:
> [3/20/2013 7:28:46 PM] PHYLock Using RAM
>
> Because for some reason it used RAM and not Disk for caching - did you
> disable the disk caching in settings?
>
>
No, I didn't
> [3/20/2013 7:28:46 PM] PHYLock Using RAM
>
> Because for some reason it used RAM and not Disk for caching - did you
> disable the disk caching in settings?
>
>
No, I didn't
Re: Phylock Cache Size Issue
On 2013-03-21 12:38 AM, PP wrote:
> When you start IFW, click the Settings button. You can adjust the size of the PHYLock RAM Cache there. Since you've been running okay for a while with the default value I'd just try increasing it 2048 (to 10240) and see how it goes.
>
> The backup created was automatically deleted because of the error. You can turn that option off if you want to keep failed backups (in Settings, Retain Failed Backups). There's a good chance the file is not valid, though.
>
> 204 indicates a PHYLock Cache error.
>
>
thanks
I did dry run through IFW to look at command line, but saw no difference
in command line after changing RAM cache to 10240.
If that's the case, then how would I incorporate this cache size change
into command line?
thanks
AlanD
> When you start IFW, click the Settings button. You can adjust the size of the PHYLock RAM Cache there. Since you've been running okay for a while with the default value I'd just try increasing it 2048 (to 10240) and see how it goes.
>
> The backup created was automatically deleted because of the error. You can turn that option off if you want to keep failed backups (in Settings, Retain Failed Backups). There's a good chance the file is not valid, though.
>
> 204 indicates a PHYLock Cache error.
>
>
thanks
I did dry run through IFW to look at command line, but saw no difference
in command line after changing RAM cache to 10240.
If that's the case, then how would I incorporate this cache size change
into command line?
thanks
AlanD