Error - Destination not large enough

User discussion and information resource forum for the TeraByte OS Deployment Tool Suite.

Error - Destination not large enough

Postby Rickkee » Sat Oct 29, 2011 9:59 am

I have a 54Gig TBI file I am trying to convert to vhd.
The drive had about 80 Gb Used, partition was 216 GB, did not select full partition option.
Tried two drives, one with 154GB Free, the other with 216GB Free
Running as Admin
Error - The selected destination is not large enough, 169966 MiBs required.
Windows 7 Ultimate - pls advise
Rickkee
 
Posts: 5
Joined: Fri Sep 30, 2011 5:49 pm

Re: Error - Destination not large enough

Postby TeraByte Support(PP) » Sat Oct 29, 2011 11:19 am

Does it work if you use the default size (127.5 GiB)? Note that Virtual PC is limited to the default size or smaller.

When you specify the size for the VHD are you including the "GiB" (e.g. "154GiB")? If you just enter a number, like 154, it will end up 154MB, which would be too small. You could check the IFW.LOG file and see if this is what happened. The "-v0" parameter shows the size ("-v0:I:\vd.vhd,R,vhdd,154").
Paul Purviance
TeraByte Support
TeraByte Support(PP)
 
Posts: 1100
Joined: Thu Aug 11, 2011 5:51 pm

Re: Error - Destination not large enough

Postby Rickkee » Sun Oct 30, 2011 5:17 am

Something is wrong, or I do not understand how the program works, probably the later.
I set the size to 250GiB and it started working, but failed on the partition resize step. It does not seem logical this would work, as the free space I had on the drive to recover the VHD was 154GiB free. The actual size of the drive I am recovering was 80GiB, on a original partition of 214Gib.
Rickkee
 
Posts: 5
Joined: Fri Sep 30, 2011 5:49 pm

Re: Error - Destination not large enough

Postby TeraByte Support » Sun Oct 30, 2011 10:26 am

Read this:
http://www.terabyteunlimited.com/kb/article.php?id=554

It would only try to resize if it had to fit a smaller space, adjust for
alignment, or you wanted to to scale larger. If you got an error, it means
something in the file system isn't proper. run chkdsk /f on the partition
to fix it then resize it manually using BootIt or do the chkdsk /f on the
source then backup again once it's cleaned up, then the resize would work on
restore.


"Rickkee" wrote in message news:584@public.tbosdt...

Something is wrong, or I do not understand how the program works, probably
the later.
I set the size to 250GiB and it started working, but failed on the partition
resize step. It does not seem logical this would work, as the free space I
had on the drive to recover the VHD was 154GiB free. The actual size of
the drive I am recovering was 80GiB, on a original partition of 214Gib.

TeraByte Support
 
Posts: 2311
Joined: Thu May 05, 2011 3:37 pm

Re: Error - Destination not large enough

Postby DrTeeth » Thu May 10, 2012 4:52 pm

On Wed, 9 May 2012 21:53:07 PDT, just as I was about to take a herb,
keiooz disturbed my reverie and wrote:

>This happens when you weren't able to delete files completely. Like if your C: drive has a total 100GB and is already full and you removed 20GB, then copy 15GB worth of files to it will not actually work. This means you have to delete the deleted files in Recycle Bin as well. Get my point?
>
Lets not forget all the garbage that accumulates in the two temp file
locations.
--

Cheers

DrT
______________________________
We may not be able to prevent the stormy times in
our lives; but we can always choose to dance
in the puddles (Jewish proverb).
DrTeeth
 
Posts: 970
Joined: Fri Aug 12, 2011 11:58 am

Re: Error - Destination not large enough

Postby chal.nikkal » Mon Jan 12, 2015 11:19 pm

I set the size to 250GiB and it started working, but failed on the partition resize step. It does not seem logical this would work, as the free space I had on the drive to recover the VHD was 154GiB free. The actual size of the drive I am recovering was 80GiB, on a original partition of 214Gib.??
__________
Last edited by chal.nikkal on Mon Feb 02, 2015 9:19 pm, edited 2 times in total.
chal.nikkal
 
Posts: 1
Joined: Mon Jan 12, 2015 10:52 pm

Re: Error - Destination not large enough

Postby TeraByte Support » Tue Jan 13, 2015 8:27 am

failing on the resize step is because there was an error reported - most
likely something needs to be fixed up via chkdsk /f - you could do that then
resize it manually, or backup again then restore again. The backup backs
up the system as is, even if there are some file system issues.

"chal.nikkal" wrote in message news:9227@public.tbosdt...

I set the size to 250GiB and it started working, but failed on the partition
resize step. It does not seem logical this would work, as the free space I
had on the drive to recover the VHD was 154GiB free. The actual size of the
drive I am recovering was 80GiB, on a original partition of 214Gib.??

TeraByte Support
 
Posts: 2311
Joined: Thu May 05, 2011 3:37 pm


Return to OSD Tool Suite