How to use IFD with SAMSUNG XE50071C tablet

User discussion forum for items related to technology in general.

How to use IFD with SAMSUNG XE50071C tablet

Postby Stonefox » Sat Jul 12, 2014 11:02 pm

I would liek to make a image of my new Samsung 500T tablet using IFD.
It comes installed with windows 8.

I cant figure out how to make it see the IFD boot USB stick.

Any help appreciated.

Please note: I have only recently bought IFW & IFD and am not as powerful a user as what I see in other posts.
Stonefox
 
Posts: 4
Joined: Sat Jul 12, 2014 10:25 pm

Re: How to use IFD with SAMSUNG XE50071C tablet

Postby TeraByte Support » Sat Jul 12, 2014 11:19 pm

Use the Image for Linux boot disk which support USB3 - otherwise the BIOS
must support USB3 (it would map in the device as a "BIOS" device if attached
at boot). You could also try Image for UEFI if that system has UEFI and
UEFI version is stable and complete.

"Stonefox" wrote in message news:8348@public.tech.misc...

I would liek to make a image of my new Samsung 500T tablet using IFD.
It comes installed with windows 8.

I cant figure out how to make it see the IFD boot USB stick.

Any help appreciated.

Please note: I have only recently bought IFW & IFD and am not as powerful a
user as what I see in other posts.

TeraByte Support
 
Posts: 2311
Joined: Thu May 05, 2011 3:37 pm

Re: How to use IFD with SAMSUNG XE50071C tablet

Postby Stonefox » Fri Sep 26, 2014 12:03 am

thanks for the reply.

Tried Image for Linux boot disk [USB].
at boot the USB as seen and started to load, producing screen:
Loading vmlinuz.....
Loading initrmfs.gz......

then gets stuck at this point.

ANy suggestions?
Stonefox
 
Posts: 4
Joined: Sat Jul 12, 2014 10:25 pm

Re: How to use IFD with SAMSUNG XE50071C tablet

Postby Brian K » Fri Sep 26, 2014 1:06 am

Stonefox,

I have the same problem with my Asus tablet. We have Atom processors and they don't support booting Linux. But a TBWinRE USB flash drive will boot. You can create IFW images in Win8 or from the TBWinRE flash drive.

http://www.terabyteunlimited.com/howto/ ... torial.htm
Brian K
 
Posts: 1175
Joined: Thu Aug 11, 2011 6:11 pm

Re: How to use IFD with SAMSUNG XE50071C tablet

Postby Stonefox » Fri Sep 26, 2014 2:27 am

Thanks Brian.
I looked in detail at the tutorial you suggested.
I don't want to put any new software on the new samsung [including IFW] until i have made an image, so how do I make a TBWinRE USB flash drive which will boot?
Stonefox
 
Posts: 4
Joined: Sat Jul 12, 2014 10:25 pm

Re: How to use IFD with SAMSUNG XE50071C tablet

Postby Brian K » Fri Sep 26, 2014 3:10 am

Stonefox,

Install IFW in your desktop and create a TBWinRE UFD. It should boot in your Samsung. Ideally you should create the UFD in the device where it will be used but you would prefer to create an image first.
Brian K
 
Posts: 1175
Joined: Thu Aug 11, 2011 6:11 pm

Re: How to use IFD with SAMSUNG XE50071C tablet

Postby mjnelson99 » Fri Sep 26, 2014 9:17 am

Would IFD work?
Just use Makedisk.exe to create your bootable disk.

On 9/26/2014 2:03 AM, Stonefox wrote:
> thanks for the reply.
>
> Tried Image for Linux boot disk [USB].
> at boot the USB as seen and started to load, producing screen:
> Loading vmlinuz.....
> Loading initrmfs.gz......
>
> then gets stuck at this point.
>
> ANy suggestions?
>
>
mjnelson99
 
Posts: 766
Joined: Thu Aug 11, 2011 6:24 pm

Re: How to use IFD with SAMSUNG XE50071C tablet

Postby Stonefox » Sat Sep 27, 2014 11:35 pm

hI mjnelson
The susmsang 500T just doesn't see the USB at boot. tried making several different versions of IFD but no luck at all. I don't know how to make the hardware boot from the IFD USB, any ideas?
Stonefox
 
Posts: 4
Joined: Sat Jul 12, 2014 10:25 pm

Re: How to use IFD with SAMSUNG XE50071C tablet

Postby Brian K » Sun Sep 28, 2014 12:27 am

I doubt you have a Legacy choice in your BIOS. I don't either. So IFD won't boot.

http://www.terabyteunlimited.com/kb/article.php?id=572

TBWinRE will boot in UEFI and Legacy BIOS.
Brian K
 
Posts: 1175
Joined: Thu Aug 11, 2011 6:11 pm

Re: How to use IFD with SAMSUNG XE50071C tablet

Postby mjnelson99 » Sun Sep 28, 2014 9:01 am

Are you able to change the boot sequence?
Mary

On 9/28/2014 1:35 AM, Stonefox wrote:
> hI mjnelson
> The susmsang 500T just doesn't see the USB at boot.

tried making several different versions of IFD but no luck at all.

I don't know how to make the hardware boot from the IFD USB, any ideas?
>
>
mjnelson99
 
Posts: 766
Joined: Thu Aug 11, 2011 6:24 pm


Return to Technology

cron