Cannot Mount drive TBIMount Ver.2.86
Cannot Mount drive TBIMount Ver.2.86
I cannot mount an Image made by IFW ver 2.86 with TBIMount 1.10 Mounting Image from previous version 2.85 works.
- Attachments
-
- MountError.JPG (20.77 KiB) Viewed 5581 times
-
- Posts: 3628
- Joined: Thu May 05, 2011 10:37 pm
Re: Cannot Mount drive TBIMount Ver.2.86
needs to be 1.11 version which should install with 2.86 provided you let it
install tbiview (the program version information is correct, but the title
bar still showing 1.10).
"VanBuran" wrote in message news:7050@public.image...
I cannot mount an Image made by IFW ver 2.86 with TBIMount 1.10 Mounting
Image from previous version 2.85 works.
install tbiview (the program version information is correct, but the title
bar still showing 1.10).
"VanBuran" wrote in message news:7050@public.image...
I cannot mount an Image made by IFW ver 2.86 with TBIMount 1.10 Mounting
Image from previous version 2.85 works.
Re: Cannot Mount drive TBIMount Ver.2.86
TBIview is marked for install during installation. I have uninstalled and reinstalled. Still get the same error.
TeraByte Support wrote:
> needs to be 1.11 version which should install with 2.86 provided you let it
>
> install tbiview (the program version information is correct, but the title
>
> bar still showing 1.10).
>
> "VanBuran" wrote in message news:7050@public.image...
>
> I cannot mount an Image made by IFW ver 2.86 with TBIMount 1.10 Mounting
> Image from previous version 2.85 works.
TeraByte Support wrote:
> needs to be 1.11 version which should install with 2.86 provided you let it
>
> install tbiview (the program version information is correct, but the title
>
> bar still showing 1.10).
>
> "VanBuran" wrote in message news:7050@public.image...
>
> I cannot mount an Image made by IFW ver 2.86 with TBIMount 1.10 Mounting
> Image from previous version 2.85 works.
-
- Posts: 3628
- Joined: Thu May 05, 2011 10:37 pm
Re: Cannot Mount drive TBIMount Ver.2.86
right click the tbimount.sys driver and check the version via properties.
Note that if it was in use already and not shutdown, you'll have to reboot
for the new tbimount.sys to activate or if you're sure nothing is active,
net stop tbimount (if it gives you trouble after that, will need to reboot).
"VanBuran" wrote in message news:7065@public.image...
TBIview is marked for install during installation. I have uninstalled and
reinstalled. Still get the same error.
TeraByte Support wrote:
> needs to be 1.11 version which should install with 2.86 provided you let
> it
>
> install tbiview (the program version information is correct, but the title
>
> bar still showing 1.10).
>
> "VanBuran" wrote in message news:7050@public.image...
>
> I cannot mount an Image made by IFW ver 2.86 with TBIMount 1.10 Mounting
> Image from previous version 2.85 works.
Note that if it was in use already and not shutdown, you'll have to reboot
for the new tbimount.sys to activate or if you're sure nothing is active,
net stop tbimount (if it gives you trouble after that, will need to reboot).
"VanBuran" wrote in message news:7065@public.image...
TBIview is marked for install during installation. I have uninstalled and
reinstalled. Still get the same error.
TeraByte Support wrote:
> needs to be 1.11 version which should install with 2.86 provided you let
> it
>
> install tbiview (the program version information is correct, but the title
>
> bar still showing 1.10).
>
> "VanBuran" wrote in message news:7050@public.image...
>
> I cannot mount an Image made by IFW ver 2.86 with TBIMount 1.10 Mounting
> Image from previous version 2.85 works.
Re: Cannot Mount drive TBIMount Ver.2.86
On Tue, 24 Dec 2013 13:34:16 PST, just as I was about to take a herb,
VanBuran disturbed my reverie and wrote:
>TBIview is marked for install during installation. I have uninstalled and reinstalled. Still get the same error.
I am having the same problem too. Plus v1.10 gets installed here from
the IfW 2.86 installation.
--
Cheers,
DrT
** Stress - the condition brought about by having to
** resist the temptation to beat the living daylights
** out of someone who richly deserves it.
VanBuran disturbed my reverie and wrote:
>TBIview is marked for install during installation. I have uninstalled and reinstalled. Still get the same error.
I am having the same problem too. Plus v1.10 gets installed here from
the IfW 2.86 installation.
--
Cheers,
DrT
** Stress - the condition brought about by having to
** resist the temptation to beat the living daylights
** out of someone who richly deserves it.
Re: Cannot Mount drive TBIMount Ver.2.86
Right click on tbimount.x64.sys. File Ver.1.011.0 Product Ver.1.11
TeraByte Support wrote:
> right click the tbimount.sys driver and check the version via properties.
>
> Note that if it was in use already and not shutdown, you'll have to reboot
>
> for the new tbimount.sys to activate or if you're sure nothing is active,
> net stop tbimount (if it gives you trouble after that, will need to
> reboot).
>
> "VanBuran" wrote in message news:7065@public.image...
>
> TBIview is marked for install during installation. I have uninstalled and
> reinstalled. Still get the same error.
>
> TeraByte Support wrote:
>
> > needs to be 1.11 version which should install with 2.86 provided you let
>
> > it
> >
> > install tbiview (the program version information is correct, but the
> title
> >
> > bar still showing 1.10).
> >
> > "VanBuran" wrote in message news:7050@public.image...
> >
> > I cannot mount an Image made by IFW ver 2.86 with TBIMount 1.10 Mounting
> > Image from previous version 2.85 works.
TeraByte Support wrote:
> right click the tbimount.sys driver and check the version via properties.
>
> Note that if it was in use already and not shutdown, you'll have to reboot
>
> for the new tbimount.sys to activate or if you're sure nothing is active,
> net stop tbimount (if it gives you trouble after that, will need to
> reboot).
>
> "VanBuran" wrote in message news:7065@public.image...
>
> TBIview is marked for install during installation. I have uninstalled and
> reinstalled. Still get the same error.
>
> TeraByte Support wrote:
>
> > needs to be 1.11 version which should install with 2.86 provided you let
>
> > it
> >
> > install tbiview (the program version information is correct, but the
> title
> >
> > bar still showing 1.10).
> >
> > "VanBuran" wrote in message news:7050@public.image...
> >
> > I cannot mount an Image made by IFW ver 2.86 with TBIMount 1.10 Mounting
> > Image from previous version 2.85 works.
Re: Cannot Mount drive TBIMount Ver.2.86
On Tue, 24 Dec 2013 22:45:24 PST, just as I was about to take a herb,
VanBuran disturbed my reverie and wrote:
>Right click on tbimount.x64.sys. File Ver.1.011.0 Product Ver.1.11
You are not alone . Just out if interest, what AV are you using if
any. I use ESET 7 here.
--
Cheers,
DrT
** Stress - the condition brought about by having to
** resist the temptation to beat the living daylights
** out of someone who richly deserves it.
VanBuran disturbed my reverie and wrote:
>Right click on tbimount.x64.sys. File Ver.1.011.0 Product Ver.1.11
You are not alone . Just out if interest, what AV are you using if
any. I use ESET 7 here.
--
Cheers,
DrT
** Stress - the condition brought about by having to
** resist the temptation to beat the living daylights
** out of someone who richly deserves it.
Re: Cannot Mount drive TBIMount Ver.2.86
DrTeeth wrote:
> On Tue, 24 Dec 2013 22:45:24 PST, just as I was about to take a herb,
> VanBuran disturbed my reverie and wrote:
>
> >Right click on tbimount.x64.sys. File Ver.1.011.0 Product Ver.1.11
>
> You are not alone . Just out if interest, what AV are you using if
> any. I use ESET 7 here.
> --
>
> Cheers,
>
> DrT
>
> ** Stress - the condition brought about by having to
> ** resist the temptation to beat the living daylights
> ** out of someone who richly deserves it.
My AV is Webroot Secure Anywhere
Regards
> On Tue, 24 Dec 2013 22:45:24 PST, just as I was about to take a herb,
> VanBuran disturbed my reverie and wrote:
>
> >Right click on tbimount.x64.sys. File Ver.1.011.0 Product Ver.1.11
>
> You are not alone . Just out if interest, what AV are you using if
> any. I use ESET 7 here.
> --
>
> Cheers,
>
> DrT
>
> ** Stress - the condition brought about by having to
> ** resist the temptation to beat the living daylights
> ** out of someone who richly deserves it.
My AV is Webroot Secure Anywhere
Regards
Re: Cannot Mount drive TBIMount Ver.2.86
TeraByte,
> needs to be 1.11 version which should install with 2.86 provided you let it
> install tbiview (the program version information is correct, but the title
> bar still showing 1.10).
I checked it's file detals and it does show there as being 1.11.
Mine works fine, no reboot requested, nor required.
Win 7 Pro 64-bit w/SP1
--
Jim L.
Using - Virtual Access(OLR)
http://www.virtual-access.org
6.3.0.5 and Windows 7 Service Pack 1 build 7601
> needs to be 1.11 version which should install with 2.86 provided you let it
> install tbiview (the program version information is correct, but the title
> bar still showing 1.10).
I checked it's file detals and it does show there as being 1.11.
Mine works fine, no reboot requested, nor required.
Win 7 Pro 64-bit w/SP1
--
Jim L.
Using - Virtual Access(OLR)
http://www.virtual-access.org
6.3.0.5 and Windows 7 Service Pack 1 build 7601
Re: Cannot Mount drive TBIMount Ver.2.86
I get the error on Win 8.1 64bit and on Win 7.0 64bit. Win 7 wants the drive to be formatted first.
- Attachments
-
- MountError Win7.JPG (23.64 KiB) Viewed 5546 times