TeraByte Unlimited

I have two images made using 2.85 of the same C drive that open with Ver.2.86 TMIMount

TeraByte Support wrote:
> but in your case, you can open the 2.85 files in tbimount?
>
> "VanBuran" wrote in message news:[email protected]...
>
> I do not have a problem with Validating after making an Image in IFW. I
> also
> do not have a problem restoring using IFL from a USB stick. TBIView also
> works OK.

don't click on that one - right click on
%windir%\system32\drivers\tbimount.sys (the one that windows is actually
using) and check that one.


"VanBuran" wrote in message news:[email protected]...

Right click on tbimount.x64.sys. File Ver.1.011.0 Product Ver.1.11

TeraByte Support wrote:
> right click the tbimount.sys driver and check the version via properties.
>
> Note that if it was in use already and not shutdown, you'll have to reboot
>
> for the new tbimount.sys to activate or if you're sure nothing is active,
> net stop tbimount (if it gives you trouble after that, will need to
> reboot).
>
> "VanBuran" wrote in message news:[email protected]...
>
> TBIview is marked for install during installation. I have uninstalled and
> reinstalled. Still get the same error.
>
> TeraByte Support wrote:
>
> > needs to be 1.11 version which should install with 2.86 provided you let
>
> > it
> >
> > install tbiview (the program version information is correct, but the
> title
> >
> > bar still showing 1.10).
> >
> > "VanBuran" wrote in message news:[email protected]...
> >
> > I cannot mount an Image made by IFW ver 2.86 with TBIMount 1.10 Mounting
> > Image from previous version 2.85 works.

Windows ver. File 1.0.11.0 Product 1.11 size 365kb.

TeraByte Support wrote:
> don't click on that one - right click on
> %windir%\system32\drivers\tbimount.sys (the one that windows is actually
> using) and check that one.
>
>
> "VanBuran" wrote in message news:[email protected]...
>
> Right click on tbimount.x64.sys. File Ver.1.011.0 Product Ver.1.11
>
> TeraByte Support wrote:
> > right click the tbimount.sys driver and check the version via
> properties.
> >
> > Note that if it was in use already and not shutdown, you'll have to
> reboot
> >
> > for the new tbimount.sys to activate or if you're sure nothing is
> active,
> > net stop tbimount (if it gives you trouble after that, will need to
> > reboot).
> >
> > "VanBuran" wrote in message news:[email protected]...
> >
> > TBIview is marked for install during installation. I have uninstalled
> and
> > reinstalled. Still get the same error.
> >
> > TeraByte Support wrote:
> >
> > > needs to be 1.11 version which should install with 2.86 provided you
> let
> >
> > > it
> > >
> > > install tbiview (the program version information is correct, but the
> > title
> > >
> > > bar still showing 1.10).
> > >
> > > "VanBuran" wrote in message news:[email protected]...
> > >
> > > I cannot mount an Image made by IFW ver 2.86 with TBIMount 1.10
> Mounting
> > > Image from previous version 2.85 works.

do you have a problem with one of the other partitions, like the EFI System
or the 350M SRP if one exists? if so, email support with a link to
download it so it can be looked at.

Can't create or reproduce the problem here and really there is no reason I
can think of for it to be different than prior versions (especially since
you're seeing the older 2.85 files work so not in the binary itself).


"VanBuran" wrote in message news:[email protected]...

Windows ver. File 1.0.11.0 Product 1.11 size 365kb.

TeraByte Support wrote:
> don't click on that one - right click on
> %windir%\system32\drivers\tbimount.sys (the one that windows is actually
> using) and check that one.
>
>
> "VanBuran" wrote in message news:[email protected]...
>
> Right click on tbimount.x64.sys. File Ver.1.011.0 Product Ver.1.11
>
> TeraByte Support wrote:
> > right click the tbimount.sys driver and check the version via
> properties.
> >
> > Note that if it was in use already and not shutdown, you'll have to
> reboot
> >
> > for the new tbimount.sys to activate or if you're sure nothing is
> active,
> > net stop tbimount (if it gives you trouble after that, will need to
> > reboot).
> >
> > "VanBuran" wrote in message news:[email protected]...
> >
> > TBIview is marked for install during installation. I have uninstalled
> and
> > reinstalled. Still get the same error.
> >
> > TeraByte Support wrote:
> >
> > > needs to be 1.11 version which should install with 2.86 provided you
> let
> >
> > > it
> > >
> > > install tbiview (the program version information is correct, but the
> > title
> > >
> > > bar still showing 1.10).
> > >
> > > "VanBuran" wrote in message news:[email protected]...
> > >
> > > I cannot mount an Image made by IFW ver 2.86 with TBIMount 1.10
> Mounting
> > > Image from previous version 2.85 works.

No problems with any partitions

Well it seems I have found something on my system. I have change the compression from " Enhanced Size-A" to "Enhanced Speed-A". Made two full backups of the operating system HD and both open using TBIMount.


TeraByte Support wrote:
> do you have a problem with one of the other partitions, like the EFI System
>
> or the 350M SRP if one exists? if so, email support with a link to
> download it so it can be looked at.
>
> Can't create or reproduce the problem here and really there is no reason I
>
> can think of for it to be different than prior versions (especially since
> you're seeing the older 2.85 files work so not in the binary itself).
>
>
> "VanBuran" wrote in message news:[email protected]...
>
> Windows ver. File 1.0.11.0 Product 1.11 size 365kb.
>
> TeraByte Support wrote:
> > don't click on that one - right click on
> > %windir%\system32\drivers\tbimount.sys (the one that windows is
> actually
> > using) and check that one.
> >
> >
> > "VanBuran" wrote in message news:[email protected]...
> >
> > Right click on tbimount.x64.sys. File Ver.1.011.0 Product Ver.1.11
> >
> > TeraByte Support wrote:
> > > right click the tbimount.sys driver and check the version via
> > properties.
> > >
> > > Note that if it was in use already and not shutdown, you'll have to
> > reboot
> > >
> > > for the new tbimount.sys to activate or if you're sure nothing is
> > active,
> > > net stop tbimount (if it gives you trouble after that, will need to
> > > reboot).
> > >
> > > "VanBuran" wrote in message news:[email protected]...
> > >
> > > TBIview is marked for install during installation. I have uninstalled
> > and
> > > reinstalled. Still get the same error.
> > >
> > > TeraByte Support wrote:
> > >
> > > > needs to be 1.11 version which should install with 2.86 provided you
> > let
> > >
> > > > it
> > > >
> > > > install tbiview (the program version information is correct, but the
> > > title
> > > >
> > > > bar still showing 1.10).
> > > >
> > > > "VanBuran" wrote in message news:[email protected]...
> > > >
> > > > I cannot mount an Image made by IFW ver 2.86 with TBIMount 1.10
> > Mounting
> > > > Image from previous version 2.85 works.

I use 'Enhanced Speed-A' compression anyway.

DrT

missed the "size" and thought "speed", okay reproduced that and that makes
since... that section must have not been found with the search when it was
changed.


"VanBuran" wrote in message news:[email protected]...

TeraByte Support wrote:
> what did you backup and what compression option did you use?
>
>
> "VanBuran" wrote in message news:[email protected]...
>
> I get the error on Win 8.1 64bit and on Win 7.0 64bit. Win 7 wants the
> drive
> to be formatted first.

Backup operating system Win8.1 64bit using Enhanced Size-A

You can get the new version at
http://www.terabyteunlimited.com/downloads-image-for-windows.htm - scroll
down to the latest tbiview/tbimount version and install it. Will take care
of the issue.

NOTE: You need to either reboot or ensure all drives are unmounted and do "net stop tbimount" for the new driver to take affect.

"VanBuran" wrote in message news:[email protected]...

TBIMount Ver.1.12 Installed, everything running as it should. Enjoy the rest of your holidays.

TeraByte Support wrote:
> You can get the new version at
> http://www.terabyteunlimited.com/downlo ... indows.htm - scroll
> down to the latest tbiview/tbimount version and install it. Will take care
>
> of the issue.
>
> NOTE: You need to either reboot or ensure all drives are unmounted and do
> "net stop tbimount" for the new driver to take affect.
>
> "VanBuran" wrote in message news:[email protected]...