Unable to boot from USB flash

User discussion and information resource forum for BootIt Bare Metal and BootIt UEFI
Post Reply
pasha123321
Posts: 2
Joined: Wed Jan 22, 2014 10:31 am

Unable to boot from USB flash

Post by pasha123321 »

Hi!
Can you help me?
I can't boot in Direct Boot Menu my bootable usb flash (but I can boot it in BIOS)

"Remove disks or other media...." etc

Thanks!
TeraByte Support
Posts: 3598
Joined: Thu May 05, 2011 10:37 pm

Re: Unable to boot from USB flash

Post by TeraByte Support »

the drive will show up if partitioned and shows up as a BIOS drive (shows up
in partition work with the BIOS bus selected).


"pasha123321" wrote in message news:7368@public.bootitbm...

Hi!
Can you help me?
I can't boot in Direct Boot Menu my bootable usb flash (but I can boot it in
BIOS)

"Remove disks or other media...." etc

Thanks!

pasha123321
Posts: 2
Joined: Wed Jan 22, 2014 10:31 am

Re: Unable to boot from USB flash

Post by pasha123321 »

Excuse me for my english :)
It is a DOS-based bootable usb flsash. I can boot with it in BIOS and I can't boot with it in BootIt Bare Metal.
TeraByte Support
Posts: 3598
Joined: Thu May 05, 2011 10:37 pm

Re: Unable to boot from USB flash

Post by TeraByte Support »

Hello,

Yes, you'll need to have a partition on it, and the BIOS must map in the
drive as a BIOS drive. USB Legacy Support enabled for disk drives in the
BIOS and attached prior to booting (for most new systems). As an
alternative, you can set it up to boot from USB first, then use the "BIOS
Sequence" option on a boot item (depending on the BIOS, that may then allow
it to boot the USB when attached).


"pasha123321" wrote in message news:7372@public.bootitbm...

Excuse me for my english

![:)]({SMILIES_PATH}/icon_e_smile.gif)

It is a DOS-based bootable usb flsash. I can boot with it in BIOS and I
can't boot with it in BootIt Bare Metal.

Post Reply