I’m running a EVGA Geforce GTX 1060 graphics card with a maximum resolution 7680x4320 and a Phillips BDM4037U 4K monitor with a native/default resolution of 3840 x 2160 @ 60 Hz. When running BootIt in BIOS the maximum resolution offered is 1024 x 768. When running BootIt UI there are option buttons for resolutions up to 2560 x 1440.
The problem is that the buttons to select 1920 x 1080 and 2560 x 1440 are not selectable, they appear but are greyed out and non responsive.
Why is this? Or better still can anyone tell me how to rectify this so I can select and use the higher resolutions because I assure you 1080 x 1024, the max I can select, looks lousy on a 40 inch 4K monitor.
Resolutions not selectable
-
- Posts: 3631
- Joined: Thu May 05, 2011 10:37 pm
Re: Resolutions not selectable
Those resolutions aren't reported as supported by UEFI.
-
- Posts: 1647
- Joined: Fri Aug 12, 2011 12:51 am
Re: Resolutions not selectable
Different resolutions may be available depending on whether the system has Secure Boot enabled or not. If it's disabled and enabling it isn't a problem, you could try that. On an ASUS board I use, enabling Secure Boot allows the 2560x1440 resolution (I usually also disable CSM and set Secure Boot to Windows mode when I change it). With Secure Boot disabled the max is 1024x768.
Re: Resolutions not selectable
Thanks for the info, I’ve just tried all the variations I can think of with secure boot and csm on and off but unfortunately nothing made any difference. Looks like I’m stuck with a blocky display.
-
- Posts: 1647
- Joined: Fri Aug 12, 2011 12:51 am
Re: Resolutions not selectable
If you're not using DisplayPort, it might be worth a try if you have a cable handy.
Re: Resolutions not selectable
Good idea but unfortunately I am already using a 1.2 display port,, hmmm I wonder if I can get the higher res using HDMI instead. I'll check if my graphics card supports HDMI and then look for a cable when I get time. Thanks for the input
Re: Resolutions not selectable
Okay, tried HDMI and it made no difference. The max I'm allowed to select regardless of which ports I use is 1280 x 1024. Oh well, it is what it is.
-
- Posts: 3631
- Joined: Thu May 05, 2011 10:37 pm
Re: Resolutions not selectable
With the next version of tbosdt you can use "list uefi videomodes" to see what's there, of course that version isn't available to the public yet.
Re: Resolutions not selectable
Thanks, I'll look forward to the next version being released.
Re: Resolutions not selectable
I tried using “list uefi videomodes” and it lists all the resolutions I can select and then two extra that I cannot select namely
Mode 005 1600 x 1200
And
Mode 006 1920 x 1440
In fact these resolutions appear nowhere else that I can find, certainly not in the display options even as greyed out non selectable items..
From this I suspect those video modes are actually available on my machine, if that is the case could you, pretty, pretty please, tell me how do I force BootIt UI to use one of these resolutions?
I really, really hope it’s possible.
Mode 005 1600 x 1200
And
Mode 006 1920 x 1440
In fact these resolutions appear nowhere else that I can find, certainly not in the display options even as greyed out non selectable items..
From this I suspect those video modes are actually available on my machine, if that is the case could you, pretty, pretty please, tell me how do I force BootIt UI to use one of these resolutions?
I really, really hope it’s possible.