My automated incremental backup restarts on RC=8 errors, and attempts a full backup. Recently there have been a large number of this pattern of error:
- IFW starts incremental settings and immediately ends with RC8
- IFW starts on same drive with full backup settings and completes normally
Notice in the log below, that IFW does not even get to the place where it writes "[2015-08-15 03:02:44 AM] Image for Windows 2.97d" to the log.
Happens very frequently with introduction of 2.97d
(the stuff that IFW writes to the log is immediately after the "--------------------------------------------------------------------------" line)
Any ideas?
=================== New Operation Starting ===========================
=================== Date: 2015-08-15 03:02:38 AM ===========================
=============================================================================
=============================================================================
Script Name : F:\Program Files\TeraByte Unlimited\TeraByte OSD Tool Suite Pro for BootIt\win\bui9.tbs 2015-09-05 v10.06
Environment : WINDOWS - Option Locking: 0
Backup From : 0@0x31B: F_DRIVE(F)
Backup TO : 1@0x2: I_DRIVE(I)
Backup Type : INCR
Basename : 2015-08-01-0401-F_DRIVE-.TBI
Incremental : 2015-08-08-1020-F_DRIVE-(I)-.TBI
Comments : Using existing Increment as Base
Run Command : IMAGEw.EXE /ue /b /base:1@0x2:"\2015-08-08-1020-F_DRIVE-(I)-.TBI" /f:1@0x2:"\$~YYYY$-$~MM$-$~DD$-$~HHMM$-F_DRIVE-(I)-"
Options : EXEC,comp,13,/B,,INCR
Bios Option : b (DOS Only)
EnvironmentD:
EnvironmentW: u;uy;hash;comp:13;max:4GiB;logl:4;logmax:1MiB;logfile:\IFD.LOG;sch:1@0x2:\;;v;wco
EnvironmentL:
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
--------------------------------------------------------------------------
[2015-08-15 03:02:40 AM] F:\Program Files\TeraByte Unlimited\TeraByte OSD Tool Suite Pro for BootIt\win\IMAGEw.EXE /ue /b /base:1@0x2:\2015-08-08-1020-F_DRIVE-(I)-.TBI /f:1@0x2:\$~YYYY$-$~MM$-$~DD$-$~HHMM$-F_DRIVE-(I)-
[2015-08-15 03:02:41 AM] Unable to determine source drive.
0 possible devices found.
[2015-08-15 03:02:41 AM] Program exiting with error code 8
[2015-08-15 03:02:41 AM] -***-INCR F_DRIVE to I_DRIVE-Image processing completed with RC=8
[2015-08-15 03:02:41 AM] -***-INCR F_DRIVE to I_DRIVE-Image processing RESTARTING as FULL due to RC=8
=============================================================================
=================== New Operation Starting ===========================
=================== Date: 2015-08-15 03:02:41 AM ===========================
=============================================================================
Script Name : F:\Program Files\TeraByte Unlimited\TeraByte OSD Tool Suite Pro for BootIt\win\bui9.tbs 2015-09-05 v10.06
Environment : WINDOWS - Option Locking: 0
Backup From : 0@0x31B: F_DRIVE(F)
Backup TO : 1@0x2: I_DRIVE(I)
Backup Type : FULL
Basename : 2015-08-01-0401-F_DRIVE-.TBI
Incremental : 2015-08-08-1020-F_DRIVE-(I)-.TBI
Comments : Using existing Increment as Base
Run Command : IMAGEw.EXE /ue /b /d:0@0x31B /f:1@0x2:"\$~YYYY$-$~MM$-$~DD$-$~HHMM$-F_DRIVE-"
Options : EXEC,comp,13,/B,,INCR
Bios Option : b (DOS Only)
EnvironmentD:
EnvironmentW: u;uy;hash;comp:13;max:4GiB;logl:4;logmax:1MiB;logfile:\IFD.LOG;sch:1@0x2:\;;v;wco
EnvironmentL:
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
--------------------------------------------------------------------------
[2015-08-15 03:02:44 AM] F:\Program Files\TeraByte Unlimited\TeraByte OSD Tool Suite Pro for BootIt\win\IMAGEw.EXE /ue /b /d:0@0x31B /f:1@0x2:\$~YYYY$-$~MM$-$~DD$-$~HHMM$-F_DRIVE-
[2015-08-15 03:02:44 AM] Image for Windows 2.97d
[2015-08-15 03:02:44 AM] Starting ...
IMAGEw.EXE /b /uy /u /d:w0@0x31B /sch:"I:\" /f:"I:\$~YYYY$-$~MM$-$~DD$-$~HHMM$-F_DRIVE-" /max:4GiB /v /comp:13 /hash
[2015-08-15 03:03:13 AM] PHYLock is waiting for drive writing to stop ...
[2015-08-15 03:03:19 AM] PHYLock using drive F:
[2015-08-15 03:03:21 AM] PHYLock Started
[2015-08-15 03:03:21 AM] PHYLock Using Disk
[2015-08-15 03:03:21 AM] PHYLock version 11
[2015-08-15 03:03:23 AM] Backup: Drive 0 (F:) F_DRIVE Volume (31B) 132407 MiB FAT-32
[2015-08-15 03:03:23 AM] To: I:\2015-08-15-0302-F_DRIVE-.TBI
[2015-08-15 03:46:55 AM] INFO: Total Sectors:271169536 Total Allocated:209062040
[2015-08-15 03:46:55 AM] INFO: 209062040 Sector(s) backed up
[2015-08-15 03:46:55 AM] Validating: F_DRIVE Volume (31B) 132407 MiB FAT-32
[2015-08-15 03:46:55 AM] From: I:\2015-08-15-0302-F_DRIVE-.TBI
[2015-08-15 03:57:50 AM] Operation Completed with Error Code 0
[2015-08-15 03:57:50 AM] Stop
[2015-08-15 03:57:50 AM] -***-FULL F_DRIVE to I_DRIVE-Image processing completed with RC=0
Unable to determine source drive. 0 possible devices f RC=8
-
TeraByte Support
- Posts: 3628
- Joined: Thu May 05, 2011 10:37 pm
Re: Unable to determine source drive. 0 possible devices f RC=8
you can increate the log level to say 50, or 100, then their will be
additional information why it couldn't find the source drive. (either
because drive wasn't read, partitions changed boundary, drive size change,
drive signature changed).
"tas3086" wrote in message news:10091@public.image...
My automated incremental backup restarts on RC=8 errors, and attempts a full
backup. Recently there have been a large number of this pattern of error:
- IFW starts incremental settings and immediately ends with RC8
- IFW starts on same drive with full backup settings and
completes normally
Notice in the log below, that IFW does not even get to the place where it
writes "[2015-08-15 03:02:44 AM] Image for Windows 2.97d" to the log.
Happens very frequently with introduction of 2.97d
(the stuff that IFW writes to the log is immediately after the
"--------------------------------------------------------------------------"
line)
Any ideas?
=================== New Operation Starting
===========================
=================== Date: 2015-08-15 03:02:38 AM
===========================
=============================================================================
=============================================================================
Script Name : F:\Program Files\TeraByte Unlimited\TeraByte OSD Tool Suite
Pro for BootIt\win\bui9.tbs 2015-09-05 v10.06
Environment : WINDOWS - Option Locking: 0
Backup From : 0@0x31B: F_DRIVE(F)
Backup TO : 1@0x2: I_DRIVE(I)
Backup Type : INCR
Basename : 2015-08-01-0401-F_DRIVE-.TBI
Incremental : 2015-08-08-1020-F_DRIVE-(I)-.TBI
Comments : Using existing Increment as Base
Run Command : IMAGEw.EXE /ue /b
/base:1@0x2:"\2015-08-08-1020-F_DRIVE-(I)-.TBI"
/f:1@0x2:"\$~YYYY$-$~MM$-$~DD$-$~HHMM$-F_DRIVE-(I)-"
Options : EXEC,comp,13,/B,,INCR
Bios Option : b (DOS Only)
EnvironmentD:
EnvironmentW:
u;uy;hash;comp:13;max:4GiB;logl:4;logmax:1MiB;logfile:\IFD.LOG;sch:1@0x2:\;;v;wco
EnvironmentL:
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
=
--------------------------------------------------------------------------
[2015-08-15 03:02:40 AM] F:\Program Files\TeraByte Unlimited\TeraByte OSD
Tool Suite Pro for BootIt\win\IMAGEw.EXE /ue /b
/base:1@0x2:\2015-08-08-1020-F_DRIVE-(I)-.TBI
/f:1@0x2:\$~YYYY$-$~MM$-$~DD$-$~HHMM$-F_DRIVE-(I)-
[2015-08-15 03:02:41 AM] Unable to determine source drive.
0 possible devices found.
[2015-08-15 03:02:41 AM] Program exiting with error code 8
[2015-08-15 03:02:41 AM] -***-INCR F_DRIVE to I_DRIVE-Image processing
completed with RC=8
[2015-08-15 03:02:41 AM] -***-INCR F_DRIVE to I_DRIVE-Image processing
RESTARTING as FULL due to RC=8
=============================================================================
=================== New Operation Starting
===========================
=================== Date: 2015-08-15 03:02:41 AM
===========================
=============================================================================
Script Name : F:\Program Files\TeraByte Unlimited\TeraByte OSD Tool Suite
Pro for BootIt\win\bui9.tbs 2015-09-05 v10.06
Environment : WINDOWS - Option Locking: 0
Backup From : 0@0x31B: F_DRIVE(F)
Backup TO : 1@0x2: I_DRIVE(I)
Backup Type : FULL
Basename : 2015-08-01-0401-F_DRIVE-.TBI
Incremental : 2015-08-08-1020-F_DRIVE-(I)-.TBI
Comments : Using existing Increment as Base
Run Command : IMAGEw.EXE /ue /b /d:0@0x31B
/f:1@0x2:"\$~YYYY$-$~MM$-$~DD$-$~HHMM$-F_DRIVE-"
Options : EXEC,comp,13,/B,,INCR
Bios Option : b (DOS Only)
EnvironmentD:
EnvironmentW:
u;uy;hash;comp:13;max:4GiB;logl:4;logmax:1MiB;logfile:\IFD.LOG;sch:1@0x2:\;;v;wco
EnvironmentL:
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
=
--------------------------------------------------------------------------
[2015-08-15 03:02:44 AM] F:\Program Files\TeraByte Unlimited\TeraByte OSD
Tool Suite Pro for BootIt\win\IMAGEw.EXE /ue /b /d:0@0x31B
/f:1@0x2:\$~YYYY$-$~MM$-$~DD$-$~HHMM$-F_DRIVE-
[2015-08-15 03:02:44 AM] Image for Windows 2.97d
[2015-08-15 03:02:44 AM] Starting ...
IMAGEw.EXE /b /uy /u /d:w0@0x31B /sch:"I:\"
/f:"I:\$~YYYY$-$~MM$-$~DD$-$~HHMM$-F_DRIVE-" /max:4GiB /v /comp:13 /hash
[2015-08-15 03:03:13 AM] PHYLock is waiting for drive writing to stop ...
[2015-08-15 03:03:19 AM] PHYLock using drive F:
[2015-08-15 03:03:21 AM] PHYLock Started
[2015-08-15 03:03:21 AM] PHYLock Using Disk
[2015-08-15 03:03:21 AM] PHYLock version 11
[2015-08-15 03:03:23 AM] Backup: Drive 0 (F:) F_DRIVE Volume (31B) 132407
MiB FAT-32
[2015-08-15 03:03:23 AM] To: I:\2015-08-15-0302-F_DRIVE-.TBI
[2015-08-15 03:46:55 AM] INFO: Total Sectors:271169536 Total
Allocated:209062040
[2015-08-15 03:46:55 AM] INFO: 209062040 Sector(s) backed up
[2015-08-15 03:46:55 AM] Validating: F_DRIVE Volume (31B) 132407 MiB FAT-32
[2015-08-15 03:46:55 AM] From: I:\2015-08-15-0302-F_DRIVE-.TBI
[2015-08-15 03:57:50 AM] Operation Completed with Error Code 0
[2015-08-15 03:57:50 AM] Stop
[2015-08-15 03:57:50 AM] -***-FULL F_DRIVE to I_DRIVE-Image processing
completed with RC=0
additional information why it couldn't find the source drive. (either
because drive wasn't read, partitions changed boundary, drive size change,
drive signature changed).
"tas3086" wrote in message news:10091@public.image...
My automated incremental backup restarts on RC=8 errors, and attempts a full
backup. Recently there have been a large number of this pattern of error:
- IFW starts incremental settings and immediately ends with RC8
- IFW starts on same drive with full backup settings and
completes normally
Notice in the log below, that IFW does not even get to the place where it
writes "[2015-08-15 03:02:44 AM] Image for Windows 2.97d" to the log.
Happens very frequently with introduction of 2.97d
(the stuff that IFW writes to the log is immediately after the
"--------------------------------------------------------------------------"
line)
Any ideas?
=================== New Operation Starting
===========================
=================== Date: 2015-08-15 03:02:38 AM
===========================
=============================================================================
=============================================================================
Script Name : F:\Program Files\TeraByte Unlimited\TeraByte OSD Tool Suite
Pro for BootIt\win\bui9.tbs 2015-09-05 v10.06
Environment : WINDOWS - Option Locking: 0
Backup From : 0@0x31B: F_DRIVE(F)
Backup TO : 1@0x2: I_DRIVE(I)
Backup Type : INCR
Basename : 2015-08-01-0401-F_DRIVE-.TBI
Incremental : 2015-08-08-1020-F_DRIVE-(I)-.TBI
Comments : Using existing Increment as Base
Run Command : IMAGEw.EXE /ue /b
/base:1@0x2:"\2015-08-08-1020-F_DRIVE-(I)-.TBI"
/f:1@0x2:"\$~YYYY$-$~MM$-$~DD$-$~HHMM$-F_DRIVE-(I)-"
Options : EXEC,comp,13,/B,,INCR
Bios Option : b (DOS Only)
EnvironmentD:
EnvironmentW:
u;uy;hash;comp:13;max:4GiB;logl:4;logmax:1MiB;logfile:\IFD.LOG;sch:1@0x2:\;;v;wco
EnvironmentL:
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
=
--------------------------------------------------------------------------
[2015-08-15 03:02:40 AM] F:\Program Files\TeraByte Unlimited\TeraByte OSD
Tool Suite Pro for BootIt\win\IMAGEw.EXE /ue /b
/base:1@0x2:\2015-08-08-1020-F_DRIVE-(I)-.TBI
/f:1@0x2:\$~YYYY$-$~MM$-$~DD$-$~HHMM$-F_DRIVE-(I)-
[2015-08-15 03:02:41 AM] Unable to determine source drive.
0 possible devices found.
[2015-08-15 03:02:41 AM] Program exiting with error code 8
[2015-08-15 03:02:41 AM] -***-INCR F_DRIVE to I_DRIVE-Image processing
completed with RC=8
[2015-08-15 03:02:41 AM] -***-INCR F_DRIVE to I_DRIVE-Image processing
RESTARTING as FULL due to RC=8
=============================================================================
=================== New Operation Starting
===========================
=================== Date: 2015-08-15 03:02:41 AM
===========================
=============================================================================
Script Name : F:\Program Files\TeraByte Unlimited\TeraByte OSD Tool Suite
Pro for BootIt\win\bui9.tbs 2015-09-05 v10.06
Environment : WINDOWS - Option Locking: 0
Backup From : 0@0x31B: F_DRIVE(F)
Backup TO : 1@0x2: I_DRIVE(I)
Backup Type : FULL
Basename : 2015-08-01-0401-F_DRIVE-.TBI
Incremental : 2015-08-08-1020-F_DRIVE-(I)-.TBI
Comments : Using existing Increment as Base
Run Command : IMAGEw.EXE /ue /b /d:0@0x31B
/f:1@0x2:"\$~YYYY$-$~MM$-$~DD$-$~HHMM$-F_DRIVE-"
Options : EXEC,comp,13,/B,,INCR
Bios Option : b (DOS Only)
EnvironmentD:
EnvironmentW:
u;uy;hash;comp:13;max:4GiB;logl:4;logmax:1MiB;logfile:\IFD.LOG;sch:1@0x2:\;;v;wco
EnvironmentL:
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
=
--------------------------------------------------------------------------
[2015-08-15 03:02:44 AM] F:\Program Files\TeraByte Unlimited\TeraByte OSD
Tool Suite Pro for BootIt\win\IMAGEw.EXE /ue /b /d:0@0x31B
/f:1@0x2:\$~YYYY$-$~MM$-$~DD$-$~HHMM$-F_DRIVE-
[2015-08-15 03:02:44 AM] Image for Windows 2.97d
[2015-08-15 03:02:44 AM] Starting ...
IMAGEw.EXE /b /uy /u /d:w0@0x31B /sch:"I:\"
/f:"I:\$~YYYY$-$~MM$-$~DD$-$~HHMM$-F_DRIVE-" /max:4GiB /v /comp:13 /hash
[2015-08-15 03:03:13 AM] PHYLock is waiting for drive writing to stop ...
[2015-08-15 03:03:19 AM] PHYLock using drive F:
[2015-08-15 03:03:21 AM] PHYLock Started
[2015-08-15 03:03:21 AM] PHYLock Using Disk
[2015-08-15 03:03:21 AM] PHYLock version 11
[2015-08-15 03:03:23 AM] Backup: Drive 0 (F:) F_DRIVE Volume (31B) 132407
MiB FAT-32
[2015-08-15 03:03:23 AM] To: I:\2015-08-15-0302-F_DRIVE-.TBI
[2015-08-15 03:46:55 AM] INFO: Total Sectors:271169536 Total
Allocated:209062040
[2015-08-15 03:46:55 AM] INFO: 209062040 Sector(s) backed up
[2015-08-15 03:46:55 AM] Validating: F_DRIVE Volume (31B) 132407 MiB FAT-32
[2015-08-15 03:46:55 AM] From: I:\2015-08-15-0302-F_DRIVE-.TBI
[2015-08-15 03:57:50 AM] Operation Completed with Error Code 0
[2015-08-15 03:57:50 AM] Stop
[2015-08-15 03:57:50 AM] -***-FULL F_DRIVE to I_DRIVE-Image processing
completed with RC=0