Page 1 of 1

IFU not listing secondary SSD

Posted: Fri Dec 21, 2018 4:05 pm
by JayW
Hi,

Hope someone can help.

I have a NVMe boot drive, and a GPT partitioned SATA SSD secondary data drive installed in an UEFI only configuration (& no RAID). I'm starting Image for UEFI (v.3.25) from within an installed instance of BootIt UEFI (v.1.05) with the intention of performing a full backup of an OS partition from the boot drive to the data drive.

However, when asked to select the destination drive the SATA drive is not listed? This is in contrast to the BootIt UEFI Partition Work window which lists both drives.

Enabling the Direct DASD IO option in the BootIt UEFI settings made no difference to the behaviour of IFU.

I also booted to the USB key used for the BootIt installation and ran IFU via this source, the Partition Work and IFU results were the same.

Any suggestions?

Thanks in advance,

Jonathan.

Re: IFU not listing secondary SSD

Posted: Fri Dec 21, 2018 6:06 pm
by TeraByte Support
is it there as one to backup and only missing from target?

"JayW" wrote in message news:16151@public.image...

Hi,

Hope someone can help.

I have a NVMe boot drive, and a GPT partitioned SATA SSD secondary data
drive installed in an UEFI only configuration (& no RAID). I'm starting
Image for UEFI (v.3.25) from within an installed instance of BootIt UEFI
(v.1.05) with the intention of performing a full backup of an OS partition
from the boot drive to the data drive.

However, when asked to select the destination drive the SATA drive is not
listed? This is in contrast to the BootIt UEFI Partition Work window which
lists both drives.

Enabling the Direct DASD IO option in the BootIt UEFI settings made no
difference to the behaviour of IFU.

I also booted to the USB key used for the BootIt installation and ran IFU
via this source, the Partition Work and IFU results were the same.

Any suggestions?

Thanks in advance,

Jonathan.


Re: IFU not listing secondary SSD

Posted: Sat Dec 22, 2018 12:34 am
by JayW
Thanks for the quick reply, but no, the secondary SSD is missing from both the Source Drive/Backup From and File Drive/Backup To screens.

TeraByte Support wrote:
> is it there as one to backup and only missing from target?
>

Re: IFU not listing secondary SSD

Posted: Sat Dec 22, 2018 1:23 am
by Brian K
JayW wrote:
> Thanks for the quick reply, but no, the secondary SSD is missing from both the Source
> Drive/Backup From and File Drive/Backup To screens.
>


Out of interest, does IFL see the secondary SSD?

Re: IFU not listing secondary SSD

Posted: Sat Dec 22, 2018 2:12 am
by JayW
Yes, having tested with latest IFL trial running off a USB key and prepared selecting 'Traditional' build, both SSD drives were listed in source and target selection screens

Brian K wrote:
> Out of interest, does IFL see the secondary SSD?