ifl_en_gui_x64 v3.21 display very small

User discussion and information resource forum for Image products.
Post Reply
TAC109
Posts: 273
Joined: Tue Sep 06, 2011 10:41 pm

ifl_en_gui_x64 v3.21 display very small

Post by TAC109 »

My PC is a Surface Pro 4 and I've successfully generated a USB flash drive
with ifl_en_gui_x64 v3.21.

To boot from this flash drive I have to set the Secure Boot option in the
UEFI to either 'Microsoft & 3rd party CA', or 'none'. In both cases IFL
boots ok. However if I set Secure Boot to 'Microsoft & 3rd party CA' all
items on the screen are shown 1/4 size, which makes them very hard to read.
(If I set Secure Boot to 'none' items are shown correctly as normal size.)
I would prefer to have the extra security of the 'Microsoft & 3rd party
CA' option so I can set this permanently and not have to go into the UEFI
every time.

Another problem with this generated USB flash drive is that the booted
system does not respond to a right-click from the track pad. This makes it
difficult to shut down cleanly. (This happens regardless of the UEFI Secure
Boot settings.)

(I also have a TBWinPE generated USB flash drive [v3.21], and this boots
successfully with no size problems, with either of the Secure Boot
settings).


TeraByte Support
Posts: 3598
Joined: Thu May 05, 2011 10:37 pm

Re: ifl_en_gui_x64 v3.21 display very small

Post by TeraByte Support »

it has to do with a 4k screen. Interesting that "none" shows normal. As
far as shutdown, you can use the windows key to bring up the menu.

"Tom Cole" wrote in message news:15603@public.image...

My PC is a Surface Pro 4 and I've successfully generated a USB flash drive
with ifl_en_gui_x64 v3.21.

To boot from this flash drive I have to set the Secure Boot option in the
UEFI to either 'Microsoft & 3rd party CA', or 'none'. In both cases IFL
boots ok. However if I set Secure Boot to 'Microsoft & 3rd party CA' all
items on the screen are shown 1/4 size, which makes them very hard to read.
(If I set Secure Boot to 'none' items are shown correctly as normal size.)
I would prefer to have the extra security of the 'Microsoft & 3rd party
CA' option so I can set this permanently and not have to go into the UEFI
every time.

Another problem with this generated USB flash drive is that the booted
system does not respond to a right-click from the track pad. This makes it
difficult to shut down cleanly. (This happens regardless of the UEFI Secure
Boot settings.)

(I also have a TBWinPE generated USB flash drive [v3.21], and this boots
successfully with no size problems, with either of the Secure Boot
settings).

TAC109
Posts: 273
Joined: Tue Sep 06, 2011 10:41 pm

Re: ifl_en_gui_x64 v3.21 display very small

Post by TAC109 »

I hope this can be fixed in the next version. Let me know if you need any
more information.

TeraByte Support wrote:
> it has to do with a 4k screen. Interesting that "none" shows normal. As
> far as shutdown, you can use the windows key to bring up the menu.
>
> "Tom Cole" wrote in message news:15603@public.image...
>
> My PC is a Surface Pro 4 and I've successfully generated a USB flash drive
> with ifl_en_gui_x64 v3.21.
>
> To boot from this flash drive I have to set the Secure Boot option in the
> UEFI to either 'Microsoft & 3rd party CA', or 'none'. In both cases IFL
> boots ok. However if I set Secure Boot to 'Microsoft & 3rd party CA' all
> items on the screen are shown 1/4 size, which makes them very hard to read.
> (If I set Secure Boot to 'none' items are shown correctly as normal size.)
> I would prefer to have the extra security of the 'Microsoft & 3rd party
> CA' option so I can set this permanently and not have to go into the UEFI
> every time.
>
> Another problem with this generated USB flash drive is that the booted
> system does not respond to a right-click from the track pad. This makes it
> difficult to shut down cleanly. (This happens regardless of the UEFI Secure
> Boot settings.)
>
> (I also have a TBWinPE generated USB flash drive [v3.21], and this boots
> successfully with no size problems, with either of the Secure Boot
> settings).


TAC109
Posts: 273
Joined: Tue Sep 06, 2011 10:41 pm

Re: ifl_en_gui_x64 v3.21 display very small

Post by TAC109 »

Another problem I've found with this version of IFL is that the 'shutdown'
and 'restart' options freeze for 30 seconds showing the Linux command
prompt before being actioned. This happens on both 'Secure Boot' settings.
I hope you can fix this as well :)


Tom Cole wrote:
> I hope this can be fixed in the next version. Let me know if you need any
> more information.
>
> TeraByte Support

wrote:
>> it has to do with a 4k screen. Interesting that "none" shows normal. As
>> far as shutdown, you can use the windows key to bring up the menu.
>>
>> "Tom Cole" wrote in message news:15603@public.image...
>>
>> My PC is a Surface Pro 4 and I've successfully generated a USB flash drive
>> with ifl_en_gui_x64 v3.21.
>>
>> To boot from this flash drive I have to set the Secure Boot option in the
>> UEFI to either 'Microsoft & 3rd party CA', or 'none'. In both cases IFL
>> boots ok. However if I set Secure Boot to 'Microsoft & 3rd party CA' all
>> items on the screen are shown 1/4 size, which makes them very hard to read.
>> (If I set Secure Boot to 'none' items are shown correctly as normal size.)
>> I would prefer to have the extra security of the 'Microsoft & 3rd party
>> CA' option so I can set this permanently and not have to go into the UEFI
>> every time.
>>
>> Another problem with this generated USB flash drive is that the booted
>> system does not respond to a right-click from the track pad. This makes it
>> difficult to shut down cleanly. (This happens regardless of the UEFI Secure
>> Boot settings.)
>>
>> (I also have a TBWinPE generated USB flash drive [v3.21], and this boots
>> successfully with no size problems, with either of the Secure Boot
>> settings).


TAC109
Posts: 273
Joined: Tue Sep 06, 2011 10:41 pm

Re: ifl_en_gui_x64 v3.21 display very small

Post by TAC109 »

I've just tried ifl_en_gui_x64 v3.22 and it is much better. Thanks for your
efforts.

However, some window elements such as the mouse, the top icon strip, and
IFL's menu bar remain very small.
(As well as the mouse icon itself being small, it takes many strokes on the
touch-pad to get anywhere!)

Other windows which remain tiny are:-
Terminal
Veracrypt
Editor
Tbiview
Tbosdt
Copyp2v
Osdtool
Tbidtool

I'm hoping these can be fixed in the next release.

Thanks again


TeraByte Support wrote:
> it has to do with a 4k screen. Interesting that "none" shows normal. As
> far as shutdown, you can use the windows key to bring up the menu.
>
> "Tom Cole" wrote in message news:15603@public.image...
>
> My PC is a Surface Pro 4 and I've successfully generated a USB flash drive
> with ifl_en_gui_x64 v3.21.
>
> To boot from this flash drive I have to set the Secure Boot option in the
> UEFI to either 'Microsoft & 3rd party CA', or 'none'. In both cases IFL
> boots ok. However if I set Secure Boot to 'Microsoft & 3rd party CA' all
> items on the screen are shown 1/4 size, which makes them very hard to read.
> (If I set Secure Boot to 'none' items are shown correctly as normal size.)
> I would prefer to have the extra security of the 'Microsoft & 3rd party
> CA' option so I can set this permanently and not have to go into the UEFI
> every time.
>
> Another problem with this generated USB flash drive is that the booted
> system does not respond to a right-click from the track pad. This makes it
> difficult to shut down cleanly. (This happens regardless of the UEFI Secure
> Boot settings.)
>
> (I also have a TBWinPE generated USB flash drive [v3.21], and this boots
> successfully with no size problems, with either of the Secure Boot
> settings).

TeraByte Support
Posts: 3598
Joined: Thu May 05, 2011 10:37 pm

Re: ifl_en_gui_x64 v3.21 display very small

Post by TeraByte Support »

those are all console apps, you can right click in the window and choose to
change font and select a larger font, it sticks with other console type
apps.


"Tom Cole" wrote in message news:15650@public.image...

I've just tried ifl_en_gui_x64 v3.22 and it is much better. Thanks for your
efforts.

However, some window elements such as the mouse, the top icon strip, and
IFL's menu bar remain very small.
(As well as the mouse icon itself being small, it takes many strokes on the
touch-pad to get anywhere!)

Other windows which remain tiny are:-
Terminal
Veracrypt
Editor
Tbiview
Tbosdt
Copyp2v
Osdtool
Tbidtool

I'm hoping these can be fixed in the next release.

Thanks again


TeraByte Support

wrote:
> it has to do with a 4k screen. Interesting that "none" shows normal. As
> far as shutdown, you can use the windows key to bring up the menu.
>
> "Tom Cole" wrote in message news:15603@public.image...
>
> My PC is a Surface Pro 4 and I've successfully generated a USB flash drive
> with ifl_en_gui_x64 v3.21.
>
> To boot from this flash drive I have to set the Secure Boot option in the
> UEFI to either 'Microsoft & 3rd party CA', or 'none'. In both cases IFL
> boots ok. However if I set Secure Boot to 'Microsoft & 3rd party CA' all
> items on the screen are shown 1/4 size, which makes them very hard to
> read.
> (If I set Secure Boot to 'none' items are shown correctly as normal size.)
> I would prefer to have the extra security of the 'Microsoft & 3rd party
> CA' option so I can set this permanently and not have to go into the UEFI
> every time.
>
> Another problem with this generated USB flash drive is that the booted
> system does not respond to a right-click from the track pad. This makes
> it
> difficult to shut down cleanly. (This happens regardless of the UEFI
> Secure
> Boot settings.)
>
> (I also have a TBWinPE generated USB flash drive [v3.21], and this boots
> successfully with no size problems, with either of the Secure Boot
> settings).

TAC109
Posts: 273
Joined: Tue Sep 06, 2011 10:41 pm

Re: ifl_en_gui_x64 v3.21 display very small

Post by TAC109 »

I think I mentioned that right-click doesn't work. Pressing the 'window'
key when over the terminal window just brings up the background right-click
menu. Clicking the icon at the left end of the terminal menu bar doesn't
show a font option. With the tiny font, those programs I listed below are
virtually unusable.

An interesting observation is that while booting with UEFI set to 'none'
and as all the Linux verbiage spews forth, after the Terabyte icons show
(one for each processor) the verbiage becomes a normal readable size. With
the UEFI set to 'Microsoft & 3rd party CA' all the verbiage stays tiny.

I hope this can be sorted out.



TeraByte Support wrote:
> those are all console apps, you can right click in the window and choose to
> change font and select a larger font, it sticks with other console type
> apps.
>
>
> "Tom Cole" wrote in message news:15650@public.image...
>
> I've just tried ifl_en_gui_x64 v3.22 and it is much better. Thanks for your
> efforts.
>
> However, some window elements such as the mouse, the top icon strip, and
> IFL's menu bar remain very small.
> (As well as the mouse icon itself being small, it takes many strokes on the
> touch-pad to get anywhere!)
>
> Other windows which remain tiny are:-
> Terminal
> Veracrypt
> Editor
> Tbiview
> Tbosdt
> Copyp2v
> Osdtool
> Tbidtool
>
> I'm hoping these can be fixed in the next release.
>
> Thanks again
>
>
> TeraByte Support
>
> wrote:
>> it has to do with a 4k screen. Interesting that "none" shows normal. As
>> far as shutdown, you can use the windows key to bring up the menu.
>>
>> "Tom Cole" wrote in message news:15603@public.image...
>>
>> My PC is a Surface Pro 4 and I've successfully generated a USB flash drive
>> with ifl_en_gui_x64 v3.21.
>>
>> To boot from this flash drive I have to set the Secure Boot option in the
>> UEFI to either 'Microsoft & 3rd party CA', or 'none'. In both cases IFL
>> boots ok. However if I set Secure Boot to 'Microsoft & 3rd party CA' all
>> items on the screen are shown 1/4 size, which makes them very hard to
>> read.
>> (If I set Secure Boot to 'none' items are shown correctly as normal size.)
>> I would prefer to have the extra security of the 'Microsoft & 3rd party
>> CA' option so I can set this permanently and not have to go into the UEFI
>> every time.
>>
>> Another problem with this generated USB flash drive is that the booted
>> system does not respond to a right-click from the track pad. This makes
>> it
>> difficult to shut down cleanly. (This happens regardless of the UEFI
>> Secure
>> Boot settings.)
>>
>> (I also have a TBWinPE generated USB flash drive [v3.21], and this boots
>> successfully with no size problems, with either of the Secure Boot
>> settings).


Post Reply