TeraByte Support(PP) wrote:
> I ran some test builds with the 1607 ADK on Windows 10 1607 with Shadow
> Defender and didn't have any issues. For the issue you're having, it looks
> like something is blocking access to the DISM files in the ADK (TBWinRE
> uses the installed DISM). Is anything else running on the system that might
> interfere?
>
> Can you post a complete log from the current version for a failed attempt?
>
> You could try the TBWinPE.cmd script and see if it also errors. If the 1607
> ADK is installed it should be found automatically. Otherwise, edit the
> script and specify the path (defaults for other settings should be fine).
> The script runs DISM from the install the same as if you ran it from the
> Command Prompt. If it fails at that point something else would be causing
> it.
>
http://www.terabyteunlimited.com/howto/ ... torial.htm
I tried the TBWinPE.cmd script with WADK 1607 and it worked, no error. This is the procedure I used to use before the Builder became available.
I attach below the logfile from the previous runs, using the Builder. The first part is WinPE witn WADK 1607 (failed), the second is WinRE (OK), the third is WinPE with WADK 1511 (OK).
As I posted before, the problem with the Builder occurs in two different computers, exactly the same error in both cases.
Before the error message appears, several command prompt windows flash briefly in the screen.
2016-12-17 07:40:24 - ---------------------------------------------------------------------------
2016-12-17 07:40:24 - TBWinPE/RE Builder v1.8
2016-12-17 07:40:24 - Initializing
2016-12-17 07:40:24 - Windows version: Windows 10 Pro [10.0.14393-1607,x64]
2016-12-17 07:40:24 - Creating TBWinPE.INI (using default values)
2016-12-17 07:40:24 - Importing settings from TBWinRE.cmd script file
2016-12-17 07:40:24 - File copied to config folder: TBLauncher.ini
2016-12-17 07:40:24 - File copied to config folder: startnet.cmd
2016-12-17 07:40:24 - Initialization complete
2016-12-17 07:41:26 - Verifying build requirements (TBWinPE)
2016-12-17 07:41:26 - Image for Windows 3.05 found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite
2016-12-17 07:41:26 - TBIView 4.38d found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TBIView
2016-12-17 07:41:26 - TBIMount 1.15c found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TBIView
2016-12-17 07:41:26 - TBOSDT 1.65 found (Professional for BootIt version): C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TeraByte OSD Tool Suite Pro
2016-12-17 07:41:26 - | Warning: BootIt BM license key not found or appears invalid. Without a valid key, TBOSDT will run in Professional mode.
2016-12-17 07:41:26 - Build source: Windows 10 ADK (10.0.14393)
2016-12-17 07:41:27 - Verification complete
2016-12-17 07:41:31 - Creating TBWinPE build (Architecture: AMD64)
2016-12-17 07:41:31 - Initializing DISM (1,0)
2016-12-17 07:41:31 - | Warning: Unable to initialize DISM API
2016-12-17 07:41:31 - DISM initialized (E)
2016-12-17 07:41:32 - Copying WinPE files
2016-12-17 07:41:35 - Warning: Unable to check for stale mount point (9,0xD)
2016-12-17 07:41:35 - | Error: 13
2016-12-17 07:41:35 - | Error al cargar DISM. Es posible que la herramienta DISM est? da?ada.
2016-12-17 07:41:35 - | Pruebe a instalar de nuevo DISM.
2016-12-17 07:41:35 - Mounting WinPE image
2016-12-17 07:41:39 - Error: Unable to mount WinPE image (9,0xD)
2016-12-17 07:41:39 - User prompt: Retry or Cancel operation
2016-12-17 07:43:32 - User selected to cancel the operation
2016-12-17 07:44:29 - ---------------------------------------------------------------------------
2016-12-17 07:44:29 - TBWinPE/RE Builder v1.8
2016-12-17 07:44:29 - Initializing
2016-12-17 07:44:29 - Windows version: Windows 10 Pro [10.0.14393-1607,x64]
2016-12-17 07:44:29 - Initialization complete
2016-12-17 07:44:39 - Verifying build requirements (TBWinRE)
2016-12-17 07:44:39 - Image for Windows 3.05 found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite
2016-12-17 07:44:39 - TBIView 4.38d found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TBIView
2016-12-17 07:44:39 - TBIMount 1.15c found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TBIView
2016-12-17 07:44:39 - TBOSDT 1.65 found (Professional for BootIt version): C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TeraByte OSD Tool Suite Pro
2016-12-17 07:44:39 - | Warning: BootIt BM license key not found or appears invalid. Without a valid key, TBOSDT will run in Professional mode.
2016-12-17 07:44:39 - Build source: Windows 10 Pro [10.0.14393] WinRE
2016-12-17 07:44:39 - Locating WinRE image
2016-12-17 07:44:40 - WinRE located (Winre.wim, active): C:\Recovery\WindowsRE
2016-12-17 07:44:40 - Version of installed WinRE: 10.0.14393
2016-12-17 07:44:40 - Backing up WinRE image
2016-12-17 07:44:44 - Backup created successfully
2016-12-17 07:44:44 - Verification complete
2016-12-17 07:44:51 - Creating TBWinRE build
2016-12-17 07:44:51 - Initializing DISM (1,0)
2016-12-17 07:44:51 - DISM initialized (A)
2016-12-17 07:44:52 - Copying WinRE image
2016-12-17 07:44:53 - Mounting WinRE image
2016-12-17 07:45:17 - WinRE image file architecture: x64 [10.0.14393.0]
2016-12-17 07:45:20 - Configuring WinRE
2016-12-17 07:45:21 - Adding TBLauncher
2016-12-17 07:45:21 - Adding Image for Windows
2016-12-17 07:45:22 - Adding TBIView
2016-12-17 07:45:23 - Adding TBIMount
2016-12-17 07:45:23 - Adding TeraByte OSD Tool Suite (Pro for BootIt)
2016-12-17 07:45:23 - | BootIt BM license key not found
2016-12-17 07:45:27 - Finalizing build
2016-12-17 07:45:29 - Copying booting files
2016-12-17 07:45:30 - Saving WinRE image
2016-12-17 07:45:46 - Unmounting WinRE image
2016-12-17 07:46:00 - Creating CD/UFD/ISO file layout
2016-12-17 07:46:03 - Build process completed successfully
2016-12-17 08:48:22 - ---------------------------------------------------------------------------
2016-12-17 08:48:22 - TBWinPE/RE Builder v1.8
2016-12-17 08:48:22 - Initializing
2016-12-17 08:48:22 - Windows version: Windows 10 Pro [10.0.14393-1607,x64]
2016-12-17 08:48:22 - Initialization complete
2016-12-17 08:49:40 - Verifying build requirements (TBWinPE)
2016-12-17 08:49:40 - Image for Windows 3.05 found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite
2016-12-17 08:49:40 - TBIView 4.38d found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TBIView
2016-12-17 08:49:40 - TBIMount 1.15c found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TBIView
2016-12-17 08:49:40 - TBOSDT 1.65 found (Professional for BootIt version): C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TeraByte OSD Tool Suite Pro
2016-12-17 08:49:40 - | Warning: BootIt BM license key not found or appears invalid. Without a valid key, TBOSDT will run in Professional mode.
2016-12-17 08:49:40 - Build source: Windows 10 ADK (10.0.10586)
2016-12-17 08:49:41 - Verification complete
2016-12-17 08:49:44 - Creating TBWinPE build (Architecture: AMD64)
2016-12-17 08:49:44 - Initializing DISM (1,0)
2016-12-17 08:49:44 - DISM initialized (A)
2016-12-17 08:49:45 - Copying WinPE files
2016-12-17 08:49:47 - Mounting WinPE image
2016-12-17 08:50:09 - WinPE image file architecture: x64 [10.0.10586.0]
2016-12-17 08:50:12 - Configuring WinPE
2016-12-17 08:50:13 - Adding TBLauncher
2016-12-17 08:50:13 - Adding Image for Windows
2016-12-17 08:50:14 - Adding TBIView
2016-12-17 08:50:14 - Adding TBIMount
2016-12-17 08:50:15 - Adding TeraByte OSD Tool Suite (Pro for BootIt)
2016-12-17 08:50:15 - | BootIt BM license key not found
2016-12-17 08:50:19 - Finalizing build
2016-12-17 08:50:20 - Saving WinPE image
2016-12-17 08:50:35 - Unmounting WinPE image
2016-12-17 08:50:45 - Build process completed successfully