WinPE error

User discussion and information resource forum for Image products.
TeraByte Support(PP)
Posts: 1644
Joined: Fri Aug 12, 2011 12:51 am

Re: WinPE error

Post by TeraByte Support(PP) »

I ran some test builds with the 1607 ADK on Windows 10 1607 with Shadow Defender and didn't have any issues. For the issue you're having, it looks like something is blocking access to the DISM files in the ADK (TBWinRE uses the installed DISM). Is anything else running on the system that might interfere?

Can you post a complete log from the current version for a failed attempt?

You could try the TBWinPE.cmd script and see if it also errors. If the 1607 ADK is installed it should be found automatically. Otherwise, edit the script and specify the path (defaults for other settings should be fine). The script runs DISM from the install the same as if you ran it from the Command Prompt. If it fails at that point something else would be causing it.
http://www.terabyteunlimited.com/howto/ ... torial.htm
Fracso
Posts: 72
Joined: Fri Nov 08, 2013 12:37 am

Re: WinPE error

Post by Fracso »

TeraByte Support(PP) wrote:
> I ran some test builds with the 1607 ADK on Windows 10 1607 with Shadow
> Defender and didn't have any issues. For the issue you're having, it looks
> like something is blocking access to the DISM files in the ADK (TBWinRE
> uses the installed DISM). Is anything else running on the system that might
> interfere?
>
> Can you post a complete log from the current version for a failed attempt?
>
> You could try the TBWinPE.cmd script and see if it also errors. If the 1607
> ADK is installed it should be found automatically. Otherwise, edit the
> script and specify the path (defaults for other settings should be fine).
> The script runs DISM from the install the same as if you ran it from the
> Command Prompt. If it fails at that point something else would be causing
> it.
> http://www.terabyteunlimited.com/howto/ ... torial.htm

I tried the TBWinPE.cmd script with WADK 1607 and it worked, no error. This is the procedure I used to use before the Builder became available.

I attach below the logfile from the previous runs, using the Builder. The first part is WinPE witn WADK 1607 (failed), the second is WinRE (OK), the third is WinPE with WADK 1511 (OK).

As I posted before, the problem with the Builder occurs in two different computers, exactly the same error in both cases.

Before the error message appears, several command prompt windows flash briefly in the screen.

2016-12-17 07:40:24 - ---------------------------------------------------------------------------
2016-12-17 07:40:24 - TBWinPE/RE Builder v1.8
2016-12-17 07:40:24 - Initializing
2016-12-17 07:40:24 - Windows version: Windows 10 Pro [10.0.14393-1607,x64]
2016-12-17 07:40:24 - Creating TBWinPE.INI (using default values)
2016-12-17 07:40:24 - Importing settings from TBWinRE.cmd script file
2016-12-17 07:40:24 - File copied to config folder: TBLauncher.ini
2016-12-17 07:40:24 - File copied to config folder: startnet.cmd
2016-12-17 07:40:24 - Initialization complete
2016-12-17 07:41:26 - Verifying build requirements (TBWinPE)
2016-12-17 07:41:26 - Image for Windows 3.05 found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite
2016-12-17 07:41:26 - TBIView 4.38d found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TBIView
2016-12-17 07:41:26 - TBIMount 1.15c found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TBIView
2016-12-17 07:41:26 - TBOSDT 1.65 found (Professional for BootIt version): C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TeraByte OSD Tool Suite Pro
2016-12-17 07:41:26 - | Warning: BootIt BM license key not found or appears invalid. Without a valid key, TBOSDT will run in Professional mode.
2016-12-17 07:41:26 - Build source: Windows 10 ADK (10.0.14393)
2016-12-17 07:41:27 - Verification complete
2016-12-17 07:41:31 - Creating TBWinPE build (Architecture: AMD64)
2016-12-17 07:41:31 - Initializing DISM (1,0)
2016-12-17 07:41:31 - | Warning: Unable to initialize DISM API
2016-12-17 07:41:31 - DISM initialized (E)
2016-12-17 07:41:32 - Copying WinPE files
2016-12-17 07:41:35 - Warning: Unable to check for stale mount point (9,0xD)
2016-12-17 07:41:35 - | Error: 13
2016-12-17 07:41:35 - | Error al cargar DISM. Es posible que la herramienta DISM est? da?ada.
2016-12-17 07:41:35 - | Pruebe a instalar de nuevo DISM.
2016-12-17 07:41:35 - Mounting WinPE image
2016-12-17 07:41:39 - Error: Unable to mount WinPE image (9,0xD)
2016-12-17 07:41:39 - User prompt: Retry or Cancel operation
2016-12-17 07:43:32 - User selected to cancel the operation
2016-12-17 07:44:29 - ---------------------------------------------------------------------------
2016-12-17 07:44:29 - TBWinPE/RE Builder v1.8
2016-12-17 07:44:29 - Initializing
2016-12-17 07:44:29 - Windows version: Windows 10 Pro [10.0.14393-1607,x64]
2016-12-17 07:44:29 - Initialization complete
2016-12-17 07:44:39 - Verifying build requirements (TBWinRE)
2016-12-17 07:44:39 - Image for Windows 3.05 found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite
2016-12-17 07:44:39 - TBIView 4.38d found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TBIView
2016-12-17 07:44:39 - TBIMount 1.15c found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TBIView
2016-12-17 07:44:39 - TBOSDT 1.65 found (Professional for BootIt version): C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TeraByte OSD Tool Suite Pro
2016-12-17 07:44:39 - | Warning: BootIt BM license key not found or appears invalid. Without a valid key, TBOSDT will run in Professional mode.
2016-12-17 07:44:39 - Build source: Windows 10 Pro [10.0.14393] WinRE
2016-12-17 07:44:39 - Locating WinRE image
2016-12-17 07:44:40 - WinRE located (Winre.wim, active): C:\Recovery\WindowsRE
2016-12-17 07:44:40 - Version of installed WinRE: 10.0.14393
2016-12-17 07:44:40 - Backing up WinRE image
2016-12-17 07:44:44 - Backup created successfully
2016-12-17 07:44:44 - Verification complete
2016-12-17 07:44:51 - Creating TBWinRE build
2016-12-17 07:44:51 - Initializing DISM (1,0)
2016-12-17 07:44:51 - DISM initialized (A)
2016-12-17 07:44:52 - Copying WinRE image
2016-12-17 07:44:53 - Mounting WinRE image
2016-12-17 07:45:17 - WinRE image file architecture: x64 [10.0.14393.0]
2016-12-17 07:45:20 - Configuring WinRE
2016-12-17 07:45:21 - Adding TBLauncher
2016-12-17 07:45:21 - Adding Image for Windows
2016-12-17 07:45:22 - Adding TBIView
2016-12-17 07:45:23 - Adding TBIMount
2016-12-17 07:45:23 - Adding TeraByte OSD Tool Suite (Pro for BootIt)
2016-12-17 07:45:23 - | BootIt BM license key not found
2016-12-17 07:45:27 - Finalizing build
2016-12-17 07:45:29 - Copying booting files
2016-12-17 07:45:30 - Saving WinRE image
2016-12-17 07:45:46 - Unmounting WinRE image
2016-12-17 07:46:00 - Creating CD/UFD/ISO file layout
2016-12-17 07:46:03 - Build process completed successfully
2016-12-17 08:48:22 - ---------------------------------------------------------------------------
2016-12-17 08:48:22 - TBWinPE/RE Builder v1.8
2016-12-17 08:48:22 - Initializing
2016-12-17 08:48:22 - Windows version: Windows 10 Pro [10.0.14393-1607,x64]
2016-12-17 08:48:22 - Initialization complete
2016-12-17 08:49:40 - Verifying build requirements (TBWinPE)
2016-12-17 08:49:40 - Image for Windows 3.05 found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite
2016-12-17 08:49:40 - TBIView 4.38d found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TBIView
2016-12-17 08:49:40 - TBIMount 1.15c found: C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TBIView
2016-12-17 08:49:40 - TBOSDT 1.65 found (Professional for BootIt version): C:\Program Files (x86)\TeraByte Drive Image Backup and Restore Suite\TeraByte OSD Tool Suite Pro
2016-12-17 08:49:40 - | Warning: BootIt BM license key not found or appears invalid. Without a valid key, TBOSDT will run in Professional mode.
2016-12-17 08:49:40 - Build source: Windows 10 ADK (10.0.10586)
2016-12-17 08:49:41 - Verification complete
2016-12-17 08:49:44 - Creating TBWinPE build (Architecture: AMD64)
2016-12-17 08:49:44 - Initializing DISM (1,0)
2016-12-17 08:49:44 - DISM initialized (A)
2016-12-17 08:49:45 - Copying WinPE files
2016-12-17 08:49:47 - Mounting WinPE image
2016-12-17 08:50:09 - WinPE image file architecture: x64 [10.0.10586.0]
2016-12-17 08:50:12 - Configuring WinPE
2016-12-17 08:50:13 - Adding TBLauncher
2016-12-17 08:50:13 - Adding Image for Windows
2016-12-17 08:50:14 - Adding TBIView
2016-12-17 08:50:14 - Adding TBIMount
2016-12-17 08:50:15 - Adding TeraByte OSD Tool Suite (Pro for BootIt)
2016-12-17 08:50:15 - | BootIt BM license key not found
2016-12-17 08:50:19 - Finalizing build
2016-12-17 08:50:20 - Saving WinPE image
2016-12-17 08:50:35 - Unmounting WinPE image
2016-12-17 08:50:45 - Build process completed successfully
TeraByte Support(PP)
Posts: 1644
Joined: Fri Aug 12, 2011 12:51 am

Re: WinPE error

Post by TeraByte Support(PP) »

Which language do you have configured in Windows? Is this the same on both systems?

Is the 1607 ADK just the normal download and install or any changes or additions made to it? I assume normal/no changes.

In Builder, when you tried with the "Use DISM API if supported" option disabled, was it on a clean Windows startup? No failed build attempts prior? For example, you booted into Windows, started Builder, disabled the option (or verified it disabled), then tried to create the build.

Also, can you provide the DISM logs for the failed 1607 ADK attempt from Builder and the successful 1607 ADK TBWinPE.cmd script build? These are more detailed and may help to determine the cause. The log can be found at C:\Windows\Logs\DISM\dism.log. Note that the log may be quite large and contain many other uses than the ones we're looking for (just copy out the desired parts). You could do new builds and find at end of log or find the old runs by the timestamp (start and end of operations are noted and obvious in the log).
Fracso
Posts: 72
Joined: Fri Nov 08, 2013 12:37 am

Re: WinPE error

Post by Fracso »

Windows 10 Pro, Spanish. Both systems.

WADK 1607 is normal, no changes.

I did two operations:
1. Fresh install of IFW (all my IFW installs are "fresh" because of Shadow Defender), ran Builder with "Use DISM API if supported" option disabled, failed.
2. Repeated process using the .cmd, OK.

DISM log, first part:

2016-12-22 09:25:43, Info DISM PID=4616 TID=5476 Scratch directory set to 'C:\Users\xxxxxxx\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2016-12-22 09:25:43, Info DISM PID=4616 TID=5476 DismCore.dll version: 10.0.14393.0 - CDISMManager::FinalConstruct
2016-12-22 09:25:43, Info DISM Try to initialize Panther logging 1 times, last error: 0x0
2016-12-22 09:25:43, Info DISM PID=4616 TID=5476 Successfully loaded the ImageSession at "C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM" - CDISMManager::LoadLocalImageSession
2016-12-22 09:25:43, Info DISM Try to initialize Panther logging 1 times, last error: 0x0
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Failed to get and initialize the PE Provider. Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Info DISM Try to initialize Panther logging 1 times, last error: 0x0
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Info DISM DISM Manager: PID=4616 TID=5476 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Info DISM DISM.EXE:
2016-12-22 09:25:43, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2016-12-22 09:25:43, Info DISM DISM.EXE:
2016-12-22 09:25:43, Info DISM DISM.EXE: Host machine information: OS Version=10.0.14393, Running architecture=amd64, Number of processors=4
2016-12-22 09:25:43, Info DISM DISM.EXE: Dism.exe version: 10.0.14393.0
2016-12-22 09:25:43, Info DISM DISM.EXE: Executing command line: "C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\dism.exe"
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FolderProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\WimProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\VHDProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\ImagingProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\CompatProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FfuProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FfuProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\SiloedPackageProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:43, Warning DISM DISM Provider Store: PID=4616 TID=5476 Failed to Load the provider: C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\SiloedPackageProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2016-12-22 09:25:43, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2016-12-22 09:25:43, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2016-12-22 09:25:43, Info DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
2016-12-22 09:25:43, Info DISM DISM.EXE: Attempting to add the commands from provider: WimManager
2016-12-22 09:25:43, Info DISM DISM.EXE: Getting the help information collection for the provider: WimManager.
2016-12-22 09:25:43, Info DISM DISM.EXE: Registering information from the help collection from provider: WimManager.
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(wimcommands) and category(localtoplevelhelp) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(cleanup-wim) and category(wimcommands) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(remount-wim) and category(wimcommands) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(mount-wim) and category(wimcommands) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(unmount-wim) and category(wimcommands) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(commit-wim) and category(wimcommands) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(get-wiminfo) and category(wimcommands) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(get-mountedwiminfo) and category(wimcommands) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(capture-image) and category(wimcommands) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(append-image) and category(wimcommands) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(export-image) and category(wimcommands) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(delete-image) and category(wimcommands) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(list-image) and category(wimcommands) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(update-wimbootentry) and category(wimcommands) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(get-wimbootentry) and category(wimcommands) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(capture-customimage) and category(wimcommands) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(apply-customdataimage) and category(wimcommands) for the provider(WimManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Attempting to add the commands from provider: VHDManager
2016-12-22 09:25:43, Info DISM DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
2016-12-22 09:25:43, Info DISM DISM.EXE: Getting the help information collection for the provider: GenericImagingManager.
2016-12-22 09:25:43, Info DISM DISM.EXE: Registering information from the help collection from provider: GenericImagingManager.
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(imagingcommands) and category(localtoplevelhelp) for the provider(GenericImagingManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(cleanup-mountpoints) and category(imagingcommands) for the provider(GenericImagingManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(remount-image) and category(imagingcommands) for the provider(GenericImagingManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(mount-image) and category(imagingcommands) for the provider(GenericImagingManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(unmount-image) and category(imagingcommands) for the provider(GenericImagingManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(commit-image) and category(imagingcommands) for the provider(GenericImagingManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(get-imageinfo) and category(imagingcommands) for the provider(GenericImagingManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(get-mountedimageinfo) and category(imagingcommands) for the provider(GenericImagingManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(apply-image) and category(imagingcommands) for the provider(GenericImagingManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(split-image) and category(imagingcommands) for the provider(GenericImagingManager).
2016-12-22 09:25:43, Info DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2016-12-22 09:25:43, Info DISM DISM.EXE: Getting the help information collection for the provider: Compatibility Manager.
2016-12-22 09:25:43, Info DISM DISM.EXE: Attempting to add the commands from provider: FfuManager
2016-12-22 09:25:43, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2016-12-22 09:25:43, Info DISM DISM.EXE:
2016-12-22 09:25:43, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
Fracso
Posts: 72
Joined: Fri Nov 08, 2013 12:37 am

Re: WinPE error

Post by Fracso »

DISM log, second part:

2016-12-22 09:25:43, Info DISM DISM.EXE:
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Disconnecting Provider: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Disconnecting Provider: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Disconnecting Provider: FfuManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:25:43, Info DISM DISM Provider Store: PID=4616 TID=5476 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:25:44, Info DISM PID=2736 TID=4484 Scratch directory set to 'C:\Users\xxxxxx\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2016-12-22 09:25:44, Info DISM PID=2736 TID=4484 DismCore.dll version: 10.0.14393.0 - CDISMManager::FinalConstruct
2016-12-22 09:25:44, Info DISM Try to initialize Panther logging 1 times, last error: 0x0
2016-12-22 09:25:44, Info DISM PID=2736 TID=4484 Successfully loaded the ImageSession at "C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM" - CDISMManager::LoadLocalImageSession
2016-12-22 09:25:44, Info DISM Try to initialize Panther logging 1 times, last error: 0x0
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Failed to get and initialize the PE Provider. Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM Try to initialize Panther logging 1 times, last error: 0x0
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Manager: PID=2736 TID=4484 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM.EXE:
2016-12-22 09:25:44, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2016-12-22 09:25:44, Info DISM DISM.EXE:
2016-12-22 09:25:44, Info DISM DISM.EXE: Host machine information: OS Version=10.0.14393, Running architecture=amd64, Number of processors=4
2016-12-22 09:25:44, Info DISM DISM.EXE: Dism.exe version: 10.0.14393.0
2016-12-22 09:25:44, Info DISM DISM.EXE: Executing command line: "C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\dism" /get-mountedwiminfo
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FolderProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\WimProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\VHDProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\ImagingProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\CompatProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FfuProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FfuProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\SiloedPackageProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Warning DISM DISM Provider Store: PID=2736 TID=4484 Failed to Load the provider: C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\SiloedPackageProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2016-12-22 09:25:44, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2016-12-22 09:25:44, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2016-12-22 09:25:44, Info DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
2016-12-22 09:25:44, Info DISM DISM.EXE: Attempting to add the commands from provider: WimManager
2016-12-22 09:25:44, Info DISM DISM.EXE: Succesfully registered commands for the provider: WimManager.
2016-12-22 09:25:44, Info DISM DISM.EXE: Attempting to add the commands from provider: VHDManager
2016-12-22 09:25:44, Info DISM DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
2016-12-22 09:25:44, Info DISM DISM.EXE: Succesfully registered commands for the provider: GenericImagingManager.
2016-12-22 09:25:44, Info DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2016-12-22 09:25:44, Info DISM DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
2016-12-22 09:25:44, Info DISM DISM.EXE: Attempting to add the commands from provider: FfuManager
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Getting Provider WimManager - CDISMProviderStore::GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2016-12-22 09:25:44, Info DISM DISM.EXE:
2016-12-22 09:25:44, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
2016-12-22 09:25:44, Info DISM DISM.EXE:
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Disconnecting Provider: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Disconnecting Provider: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Disconnecting Provider: FfuManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=2736 TID=4484 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:25:44, Info DISM PID=10012 TID=9372 Scratch directory set to 'C:\Users\OscarFH2\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2016-12-22 09:25:44, Info DISM PID=10012 TID=9372 DismCore.dll version: 10.0.14393.0 - CDISMManager::FinalConstruct
2016-12-22 09:25:44, Info DISM Try to initialize Panther logging 1 times, last error: 0x0
2016-12-22 09:25:44, Info DISM PID=10012 TID=9372 Successfully loaded the ImageSession at "C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM" - CDISMManager::LoadLocalImageSession
2016-12-22 09:25:44, Info DISM Try to initialize Panther logging 1 times, last error: 0x0
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Failed to get and initialize the PE Provider. Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM Try to initialize Panther logging 1 times, last error: 0x0
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Manager: PID=10012 TID=9372 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM.EXE:
2016-12-22 09:25:44, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2016-12-22 09:25:44, Info DISM DISM.EXE:
2016-12-22 09:25:44, Info DISM DISM.EXE: Host machine information: OS Version=10.0.14393, Running architecture=amd64, Number of processors=4
2016-12-22 09:25:44, Info DISM DISM.EXE: Dism.exe version: 10.0.14393.0
2016-12-22 09:25:44, Info DISM DISM.EXE: Executing command line: "C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\Dism" /Mount-Wim /WimFile:"ISO\sources\boot.wim" /index:1 /MountDir:"mount"
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FolderProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\WimProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\VHDProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\ImagingProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\CompatProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FfuProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FfuProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\SiloedPackageProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:25:44, Warning DISM DISM Provider Store: PID=10012 TID=9372 Failed to Load the provider: C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\SiloedPackageProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2016-12-22 09:25:44, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2016-12-22 09:25:44, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2016-12-22 09:25:44, Info DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
2016-12-22 09:25:44, Info DISM DISM.EXE: Attempting to add the commands from provider: WimManager
2016-12-22 09:25:44, Info DISM DISM.EXE: Succesfully registered commands for the provider: WimManager.
2016-12-22 09:25:44, Info DISM DISM.EXE: Attempting to add the commands from provider: VHDManager
2016-12-22 09:25:44, Info DISM DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
2016-12-22 09:25:44, Info DISM DISM.EXE: Succesfully registered commands for the provider: GenericImagingManager.
2016-12-22 09:25:44, Info DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2016-12-22 09:25:44, Info DISM DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
2016-12-22 09:25:44, Info DISM DISM.EXE: Attempting to add the commands from provider: FfuManager
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Getting Provider WimManager - CDISMProviderStore::GetProvider
2016-12-22 09:25:44, Info DISM DISM Provider Store: PID=10012 TID=9372 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
[10012] Caller did not request sparse mount
[10012] Mounting new image.
Wim: [C:\WinPE\ISO\sources\boot.wim]
Image Index: [1]
Mount Path: [C:\WinPE\mount]
[10012] Wimserv process started for guid baf6f687-063f-4ffe-8ad7-5b13b6bcecdd. Id is 9496
[9496] ImageUnmarshallHandle: Reconstituting wim at C:\WinPE\ISO\sources\boot.wim.
[9496] Mounted image at C:\WinPE\mount.
2016-12-22 09:26:03, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2016-12-22 09:26:03, Info DISM DISM.EXE:
2016-12-22 09:26:03, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
2016-12-22 09:26:03, Info DISM DISM.EXE:
2016-12-22 09:26:03, Info DISM DISM Provider Store: PID=10012 TID=9372 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2016-12-22 09:26:03, Info DISM DISM Provider Store: PID=10012 TID=9372 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:03, Info DISM DISM Provider Store: PID=10012 TID=9372 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:03, Info DISM DISM Provider Store: PID=10012 TID=9372 Disconnecting Provider: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:03, Info DISM DISM Provider Store: PID=10012 TID=9372 Disconnecting Provider: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:03, Info DISM DISM Provider Store: PID=10012 TID=9372 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:03, Info DISM DISM Provider Store: PID=10012 TID=9372 Disconnecting Provider: FfuManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:03, Info DISM DISM Provider Store: PID=10012 TID=9372 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:09, Info DISM PID=3740 TID=3448 Scratch directory set to 'C:\Users\OscarFH2\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2016-12-22 09:26:09, Info DISM PID=3740 TID=3448 DismCore.dll version: 10.0.14393.0 - CDISMManager::FinalConstruct
2016-12-22 09:26:09, Info DISM Try to initialize Panther logging 1 times, last error: 0x0
2016-12-22 09:26:09, Info DISM PID=3740 TID=3448 Successfully loaded the ImageSession at "C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM" - CDISMManager::LoadLocalImageSession
2016-12-22 09:26:09, Info DISM Try to initialize Panther logging 1 times, last error: 0x0
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Failed to get and initialize the PE Provider. Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Info DISM Try to initialize Panther logging 1 times, last error: 0x0
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Info DISM DISM Manager: PID=3740 TID=3448 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Info DISM DISM.EXE:
2016-12-22 09:26:09, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2016-12-22 09:26:09, Info DISM DISM.EXE:
2016-12-22 09:26:09, Info DISM DISM.EXE: Host machine information: OS Version=10.0.14393, Running architecture=amd64, Number of processors=4
2016-12-22 09:26:09, Info DISM DISM.EXE: Dism.exe version: 10.0.14393.0
2016-12-22 09:26:09, Info DISM DISM.EXE: Executing command line: "C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\Dism" /commit-Wim /MountDir:"mount"
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FolderProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\WimProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\VHDProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\ImagingProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\CompatProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FfuProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FfuProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\SiloedPackageProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:09, Warning DISM DISM Provider Store: PID=3740 TID=3448 Failed to Load the provider: C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\SiloedPackageProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2016-12-22 09:26:09, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2016-12-22 09:26:09, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2016-12-22 09:26:09, Info DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
2016-12-22 09:26:09, Info DISM DISM.EXE: Attempting to add the commands from provider: WimManager
2016-12-22 09:26:09, Info DISM DISM.EXE: Succesfully registered commands for the provider: WimManager.
2016-12-22 09:26:09, Info DISM DISM.EXE: Attempting to add the commands from provider: VHDManager
2016-12-22 09:26:09, Info DISM DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
2016-12-22 09:26:09, Info DISM DISM.EXE: Succesfully registered commands for the provider: GenericImagingManager.
2016-12-22 09:26:09, Info DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2016-12-22 09:26:09, Info DISM DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
2016-12-22 09:26:09, Info DISM DISM.EXE: Attempting to add the commands from provider: FfuManager
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Getting Provider WimManager - CDISMProviderStore::GetProvider
2016-12-22 09:26:09, Info DISM DISM Provider Store: PID=3740 TID=3448 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
[3740] ImageUnmarshallHandle: Reconstituting wim at C:\WinPE\ISO\sources\boot.wim.
[3740] ImageUnmarshallHandle: Reconstituting wim at C:\WinPE\ISO\sources\boot.wim.
[3740] ImageUnmarshallHandle: Reconstituting wim at C:\WinPE\ISO\sources\boot.wim.
[3740] [0xc144012f]
2016-12-22 09:26:13, Info DISM DISM WIM Provider: PID=3740 C:\WinPE\mount\windows\system32\ExplorerFrame.dll (HRESULT=0x8007011A) - CWimManager::WimProviderMsgLogCallback
2016-12-22 09:26:18, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2016-12-22 09:26:18, Info DISM DISM.EXE:
2016-12-22 09:26:18, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
2016-12-22 09:26:18, Info DISM DISM.EXE:
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=3740 TID=3448 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=3740 TID=3448 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=3740 TID=3448 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=3740 TID=3448 Disconnecting Provider: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=3740 TID=3448 Disconnecting Provider: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=3740 TID=3448 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=3740 TID=3448 Disconnecting Provider: FfuManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=3740 TID=3448 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:18, Info DISM PID=8124 TID=7456 Scratch directory set to 'C:\Users\OscarFH2\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2016-12-22 09:26:18, Info DISM PID=8124 TID=7456 DismCore.dll version: 10.0.14393.0 - CDISMManager::FinalConstruct
2016-12-22 09:26:18, Info DISM Try to initialize Panther logging 1 times, last error: 0x0
2016-12-22 09:26:18, Info DISM PID=8124 TID=7456 Successfully loaded the ImageSession at "C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM" - CDISMManager::LoadLocalImageSession
2016-12-22 09:26:18, Info DISM Try to initialize Panther logging 1 times, last error: 0x0
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Failed to get and initialize the PE Provider. Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Info DISM Try to initialize Panther logging 1 times, last error: 0x0
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Info DISM DISM Manager: PID=8124 TID=7456 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Info DISM DISM.EXE:
2016-12-22 09:26:18, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2016-12-22 09:26:18, Info DISM DISM.EXE:
2016-12-22 09:26:18, Info DISM DISM.EXE: Host machine information: OS Version=10.0.14393, Running architecture=amd64, Number of processors=4
2016-12-22 09:26:18, Info DISM DISM.EXE: Dism.exe version: 10.0.14393.0
2016-12-22 09:26:18, Info DISM DISM.EXE: Executing command line: "C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\Dism" /unmount-Wim /MountDir:"mount" /discard
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FolderProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\WimProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\VHDProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\ImagingProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\CompatProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FfuProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Connecting to the provider located at C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\FfuProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Loading Provider from location C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\SiloedPackageProvider.dll - CDISMProviderStore::Internal_GetProvider
2016-12-22 09:26:18, Warning DISM DISM Provider Store: PID=8124 TID=7456 Failed to Load the provider: C:\Program Files (x86)\Windows Kits\10\Assessment and Deployment Kit\Deployment Tools\AMD64\DISM\SiloedPackageProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2016-12-22 09:26:18, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2016-12-22 09:26:18, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2016-12-22 09:26:18, Info DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
2016-12-22 09:26:18, Info DISM DISM.EXE: Attempting to add the commands from provider: WimManager
2016-12-22 09:26:18, Info DISM DISM.EXE: Succesfully registered commands for the provider: WimManager.
2016-12-22 09:26:18, Info DISM DISM.EXE: Attempting to add the commands from provider: VHDManager
2016-12-22 09:26:18, Info DISM DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
2016-12-22 09:26:18, Info DISM DISM.EXE: Succesfully registered commands for the provider: GenericImagingManager.
2016-12-22 09:26:18, Info DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2016-12-22 09:26:18, Info DISM DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
2016-12-22 09:26:18, Info DISM DISM.EXE: Attempting to add the commands from provider: FfuManager
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Getting Provider WimManager - CDISMProviderStore::GetProvider
2016-12-22 09:26:18, Info DISM DISM Provider Store: PID=8124 TID=7456 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
[8124] ImageUnmarshallHandle: Reconstituting wim at C:\WinPE\ISO\sources\boot.wim.
[8124] ImageUnmarshallHandle: Reconstituting wim at C:\WinPE\ISO\sources\boot.wim.
[8124] ImageUnmarshallHandle: Reconstituting wim at C:\WinPE\ISO\sources\boot.wim.
[8124] ImageUnmarshallHandle: Reconstituting wim at C:\WinPE\ISO\sources\boot.wim.
[8124] ImageUnmarshallHandle: Reconstituting wim at C:\WinPE\ISO\sources\boot.wim.
[9496] Received unmount request for image with guid baf6f687-063f-4ffe-8ad7-5b13b6bcecdd.
[9496] Unmount for image at C:\WinPE\mount complete.
[8124] [0x8007000e] StateStoreGetMountedImageWimbootEntries:(1191): Espacio de almacenamiento insuficiente para completar esta operación.
2016-12-22 09:26:30, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2016-12-22 09:26:30, Info DISM DISM.EXE:
2016-12-22 09:26:30, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
2016-12-22 09:26:30, Info DISM DISM.EXE:
2016-12-22 09:26:30, Info DISM DISM Provider Store: PID=8124 TID=7456 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2016-12-22 09:26:30, Info DISM DISM Provider Store: PID=8124 TID=7456 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:30, Info DISM DISM Provider Store: PID=8124 TID=7456 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:30, Info DISM DISM Provider Store: PID=8124 TID=7456 Disconnecting Provider: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:30, Info DISM DISM Provider Store: PID=8124 TID=7456 Disconnecting Provider: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:30, Info DISM DISM Provider Store: PID=8124 TID=7456 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:30, Info DISM DISM Provider Store: PID=8124 TID=7456 Disconnecting Provider: FfuManager - CDISMProviderStore::Internal_DisconnectProvider
2016-12-22 09:26:30, Info DISM DISM Provider Store: PID=8124 TID=7456 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
TeraByte Support(PP)
Posts: 1644
Joined: Fri Aug 12, 2011 12:51 am

Re: WinPE error

Post by TeraByte Support(PP) »

This DISM log is only for the successful script build. Did the log for the failed Builder attempt not post or did it get missed?
Fracso
Posts: 72
Joined: Fri Nov 08, 2013 12:37 am

Re: WinPE error

Post by Fracso »

I seems it got missed, I copied all the lines with the 2016-12-22 date.

But I have new info: Now I am unable to replicate the problem.

When the process failed as described in the previous post, I had pointed the Builder to a WADK 1607 “10” folder copied in another session to a data partition (not shadowed).

Before I ran the script, I installed WADK, in order to not modify the script. The process finished OK.

Later today, I ran the Builder again, but I didn´t point it to the “10” folder. I left the path blank, so the default path to the WADK installation was used. The process finished OK. I tried both the “Use DISM API…” option disable and enabled, with the same result, process OK.

Tried again with the Builder pointed to the “10” folder and the option enabled and disabled, the processes failed.

I replaced the “10” folder in the data partition with a new copy from the WADK installation, and repeated pointing the Builder to the new “10”. No errors with the option enabled and disabled.

I rebooted and began anew. I enabled SD, installed IFW and WADK 1607, tried the Builder using the WADK installation and the “10” folder. In both cases the process finished OK.

Note that when I reported the problem initially, the failings happened with the WADK installed. I didn´t even know that the Builder could be pointed to the “10” folder. Also, several posterior tries that failed were done with the WADK installed.
TeraByte Support(PP)
Posts: 1644
Joined: Fri Aug 12, 2011 12:51 am

Re: WinPE error

Post by TeraByte Support(PP) »

I wonder if there was something wrong with how it installed. Maybe the "10" folder was copied from an install that didn't work. When you install the ADK do you run the setup and have it download each time or is it installing from local files? If local then I would think each install should come out the same.

In any case, if it happens again, I would still like to see the DISM log if it works out for you to get it.
Fracso
Posts: 72
Joined: Fri Nov 08, 2013 12:37 am

Re: WinPE error

Post by Fracso »

I normally install WADK from local files. I made some further tests today in the other computer, no errors, the Builder now works correctly in both computers.

Apparently the "10" folder I was using had some problem.

I´ll post back if there is something new. Thanks for your help.
Post Reply