Page 2 of 2

Re: Can I force a new BIU install rather than reactivate/rep

Posted: Wed May 01, 2019 9:52 pm
by Brian K
I think you need to uninstall BIBM before you can install BIU.

To uninstall, click Utilities, Uninstall, Remove BootIt Bare Metal. You can always reinstall BIBM later if you want to use that disk without the SSD. But you should be able to get BIU to boot the OS on the HD, with a little conversion work.

Re: Can I force a new BIU install rather than reactivate/rep

Posted: Wed May 01, 2019 10:09 pm
by dnlathrop
Brian K wrote:
> I think you need to uninstall BIBM before you can install BIU.
>
> To uninstall, click Utilities, Uninstall, Remove BootIt Bare Metal. You can
> always reinstall BIBM later if you want to use that disk without the SSD.
> But you should be able to get BIU to boot the OS on the HD, with a little
> conversion work.

Thanks for describing how to uninstall. I edited my previous post, probably after you read it, wondering in what state the HDD is left when BIBM is uninstalled. Will the last booted OS be bootable?

Uninstall, reinstall is easy enough to do but a re-install won't automatically configure the boot menus they way I have them set up now ... unless there is a way to preserve those configurations. is that possible?

EDIT: I just remembered I have more than four primaries on the HDD. If an uninstall is required, this is going to be very messy.

Please reply TB U support. Is there a way to do a BIU install without removing BIBM?

Re: Can I force a new BIU install rather than reactivate/rep

Posted: Wed May 01, 2019 11:02 pm
by TeraByte Support(PP)
As far as I know, there shouldn't be an issue with BIBM being installed already. One of my systems is configured that way -- has both BIU and BIBM on it (separate drives, of course) and booting to BIBM is via BIOS boot menu (UEFI/BIU is default). I haven't had any issues updating either (BIBM has to be done by manually selecting the partition).

Possibly another option, if the BIOS allows it, would be to disable the other drive in the BIOS. Then enable it afterwards. This doesn't require physically disconnecting anything.

I'll run a test with installing BIU with BIBM already installed and see if it shows anything.

Re: Can I force a new BIU install rather than reactivate/rep

Posted: Wed May 01, 2019 11:26 pm
by TeraByte Support(PP)
I didn't see any issues. BIU install normally with BIBM on another drive already.

Can you attach a photo of the screen you're getting when you boot the BIU media?

To check the EFI System partition to see if it has BootIt files on it, go into Partition Work, select the EFI System partition, then click the Edit File button. Select the EFI folder and check its contents. Is there a BootIt folder? If so, what's in it?

Re: Can I force a new BIU install rather than reactivate/rep

Posted: Wed May 01, 2019 11:31 pm
by TeraByte Support
if there are any items from a prior install of BIU the message changes to
reinstall / reactivate. Choose reactivate which is like install.


"dnlathrop" wrote in message news:16966@public.bootitbm...

Please reply TB U support. Is there a way to do a BIU install without
removing BIBM?


Re: Can I force a new BIU install rather than reactivate/rep

Posted: Thu May 02, 2019 12:33 am
by dnlathrop
TeraByte Support(PP) wrote:
> I didn't see any issues. BIU install normally with BIBM on another drive
> already.
>
> Can you attach a photo of the screen you're getting when you boot the BIU
> media?
>
> To check the EFI System partition to see if it has BootIt files on it, go
> into Partition Work, select the EFI System partition, then click the Edit
> File button. Select the EFI folder and check its contents. Is there a
> BootIt folder? If so, what's in it?

I have attached two photos; the BIU install boot: [attachment=1]IMG_1400-1.JPG[/attachment]

The EFI partiton has two folders: ubuntu and BOOT. The second photo shows what is in the BOOT folder. [attachment=0]IMG_1401-1.JPG[/attachment]

I looked at the creation dates of those two folders. The dates for both precede my first attempt to install BIU and seem to be related to my installation and upgrade activities with Linux.

Just in case this is important, the GRUB loader gives me two options when it loads: either boot to the newly installed Linux system on the SSD, or boot to the older Linux system on the HDD, but BIBM does not appear if I boot that system. I do not intend to boot the older Linux system in this configuration.

Re: Can I force a new BIU install rather than reactivate/rep

Posted: Sat May 04, 2019 12:49 am
by dnlathrop
A question to TBU support ...

Does my situation present a problem that you are thinking about and will get back to me when you have further thoughts?

If not, could you let me know because I have been holding off doing anything more until I hear from you.

Re: Can I force a new BIU install rather than reactivate/rep

Posted: Sat May 04, 2019 5:15 am
by TeraByte Support(PP)
When you created the BIU boot media did you select the "Partition - GPT UEFI System Partition" USB Layout type? If so, the simplest solution is to recreate the media and select the normal "Partition - MBR FAT/FAT32 Partition" option (it will still boot in UEFI mode).

Re: Can I force a new BIU install rather than reactivate/rep

Posted: Mon May 06, 2019 5:44 am
by dnlathrop
TeraByte Support(PP) wrote:
> When you created the BIU boot media did you select the "Partition -
> GPT UEFI System Partition" USB Layout type? If so, the simplest
> solution is to recreate the media and select the normal "Partition -
> MBR FAT/FAT32 Partition" option (it will still boot in UEFI mode).


Thank you for the reply. That change allowed me to successfully install BIU on the SSD without having to remove BIBM on the HDD.

I am curious why this change made a difference but obviously it's not critical to me being able to use the product.