Unable to boot from USB flash

User discussion and information resource forum for BootIt Bare Metal.

Unable to boot from USB flash

Postby pasha123321 » Wed Jan 22, 2014 3:36 am

Hi!
Can you help me?
I can't boot in Direct Boot Menu my bootable usb flash (but I can boot it in BIOS)

"Remove disks or other media...." etc

Thanks!
pasha123321
 
Posts: 2
Joined: Wed Jan 22, 2014 3:31 am

Re: Unable to boot from USB flash

Postby TeraByte Support » Wed Jan 22, 2014 9:14 am

the drive will show up if partitioned and shows up as a BIOS drive (shows up
in partition work with the BIOS bus selected).


"pasha123321" wrote in message news:7368@public.bootitbm...

Hi!
Can you help me?
I can't boot in Direct Boot Menu my bootable usb flash (but I can boot it in
BIOS)

"Remove disks or other media...." etc

Thanks!

TeraByte Support
 
Posts: 2325
Joined: Thu May 05, 2011 3:37 pm

Re: Unable to boot from USB flash

Postby pasha123321 » Wed Jan 22, 2014 9:37 pm

Excuse me for my english :)
It is a DOS-based bootable usb flsash. I can boot with it in BIOS and I can't boot with it in BootIt Bare Metal.
pasha123321
 
Posts: 2
Joined: Wed Jan 22, 2014 3:31 am

Re: Unable to boot from USB flash

Postby TeraByte Support » Wed Jan 22, 2014 11:31 pm

Hello,

Yes, you'll need to have a partition on it, and the BIOS must map in the
drive as a BIOS drive. USB Legacy Support enabled for disk drives in the
BIOS and attached prior to booting (for most new systems). As an
alternative, you can set it up to boot from USB first, then use the "BIOS
Sequence" option on a boot item (depending on the BIOS, that may then allow
it to boot the USB when attached).


"pasha123321" wrote in message news:7372@public.bootitbm...

Excuse me for my english

![:)]({SMILIES_PATH}/icon_e_smile.gif)

It is a DOS-based bootable usb flsash. I can boot with it in BIOS and I
can't boot with it in BootIt Bare Metal.

TeraByte Support
 
Posts: 2325
Joined: Thu May 05, 2011 3:37 pm


Return to BootIt Bare Metal

cron