BIBM and new Laptop (UEFI?)?

User discussion and information resource forum for BootIt Bare Metal and BootIt UEFI
Brian K
Posts: 2214
Joined: Fri Aug 12, 2011 1:11 am
Location: NSW, Australia

Re: BIBM and new Laptop (UEFI?)?

Post by Brian K »

Don't despair. In addition to Win8 I'm also running Ubuntu and WinXP. The "Other OS" setting allows this.
Brian K
Posts: 2214
Joined: Fri Aug 12, 2011 1:11 am
Location: NSW, Australia

Re: BIBM and new Laptop (UEFI?)?

Post by Brian K »

This is from the PDF....

OS Type [Windows UEFI mode]
Allows you to select your installed operating system.

[Windows UEFI mode]
Executes the Microsoft® Secure Boot check. Only select this option when
booting on Windows® UEFI mode or other Microsoft® Secure Boot compliant OS.

[Other OS]
Get the optimized function when booting on Windows® non-UEFI
mode, Windows® Vista/XP, or other Microsoft® Secure Boot non-compliant OS.
Microsoft® Secure Boot only supports Windows® UEFI mode.
mjnelson99
Posts: 785
Joined: Fri Aug 12, 2011 1:24 am

Re: BIBM and new Laptop (UEFI?)?

Post by mjnelson99 »

Can you do a factory restore if you want it back?

Maybe you can create an image before attempting a resize?

You may want to use BIBM or an Image program rather than
BING since it is probably a 64-bit system.


On 12/17/2012 1:59 AM, ohaya wrote:
> Hi,
>
> Oops. Just trashed Win8, trying to shrink the C: partition
>
> ![:(]({SMILIES_PATH}/icon_e_sad.gif)
>
> ... Earlier, I had tried using Windows Disk management, and it did shrink C: successfully, but it took it from ~500GB down to ~250GB, and I'd been trying to figure out how to get it down to a more reasonable size (~70-100GB), and in the process, it looks like I messed things up. So, I now get to test Toshiba's recovery. Thank goodness I made a set of recovery DVDs earlier
>
> ![:)]({SMILIES_PATH}/icon_e_smile.gif)
>
> ...
>
> Jim
>
>
DrTeeth
Posts: 1289
Joined: Fri Aug 12, 2011 6:58 pm

Re: BIBM and new Laptop (UEFI?)?

Post by DrTeeth »

Brian K wrote:
> This is from the PDF....

> [Other OS]
> Get the optimized function when booting on Windows® non-UEFI
> mode, Windows® Vista/XP, or other Microsoft® Secure Boot non-compliant OS.
> Microsoft® Secure Boot only supports Windows® UEFI mode.

So this other setting must turn it off as your other OSs would not be bootable as they do not support secure boot, i.e. they will not boot if it is active - that is my understanding (muddled as it may be 8-) .

TBH, when I next upgrade, secure boot is being turned off/bypassed and my disks will be MBR - until BIBM can be installed on a GPT drive. I'd be lost without it...

Had to post via a browser as there are some symbols that the usenet feed does not like, :roll: .

DrT
mjnelson99
Posts: 785
Joined: Fri Aug 12, 2011 1:24 am

Re: BIBM and new Laptop (UEFI?)?

Post by mjnelson99 »

If it is really accurate that it cannot be changed, I would
be surprised if the EU does not come down on MS like they
did re Internet Explorer.
Mary

On 12/17/2012 4:55 AM, DrTeeth wrote:
> On Sun, 16 Dec 2012 22:28:01 PST, just as I was about to take a herb,
> Brian K disturbed my reverie and wrote:
>
>> I just looked in my BIOS (Asus motherboard) and Secure Boot is Enabled and can't be changed
>
> I thought that it is meant to be able to be changed? That means you
> cannot run Linux, right? I just want to clarify this as when I look to
> upgrade in a years or so (sooner if I come into some unexpected cash)
> I want to be able to turn off secure boot for maximum flexibility.
> --
>
> Cheers
>
> DrT
> ______________________________
> We may not be able to prevent the stormy times in
> our lives; but we can always choose whether or not
> to dance in the puddles (Jewish proverb).
>
>
ohaya
Posts: 229
Joined: Fri Jan 06, 2012 11:40 pm

Re: BIBM and new Laptop (UEFI?)?

Post by ohaya »

Brian et al,

The Toshiba recovery went well, it wiped everything and appeared to restore everything to the way it as before I started messing around, one large partition with Win8, a recovery partition and one other partition for something else.

Since I was comfortable that the recovery did what it did, I've gone ahead an set the BIOS to "CMS" (non-UEFI) and secure boot to disabled, and I could then boot to BING, but only from a CD (my USB sticks don't work with the laptop :(...). I then used BING to delete the weird partition and created a new partition and installed Win7 Ultimate on there. It was a pain getting all the drivers installed, but thankfully Toshiba has drivers for Win7 on their website, so things seem to be ok now.

My P9X79 mobo just arrived today. Now, I have to go get a new processor, and am awaiting the cooler and then I'll be putting that together. I'm assuming that I'll disable UEFI and secure boot on that one also, as I don't want to bother with the things that I *CAN'T* do if I set the BIOS to UEFI.

Thanks,
Jim
TeraByte Support
Posts: 3598
Joined: Thu May 05, 2011 10:37 pm

Re: BIBM and new Laptop (UEFI?)?

Post by TeraByte Support »

BING doesn't support GPT, BIBM does - you'd want to boot BIBM in legacy
mode.

"ohaya" wrote in message news:4103@public.bootitbm...

Hi,

I just got a new laptop, a Toshiba C855-S5803, that has Windows 8 installed
on it, and a UEFI BIOS, so I guess that I'm getting a rude introduction to
the 'new' world of UEFI BIOSes

![:(]({SMILIES_PATH}/icon_e_sad.gif)

....

The BIOS came with UEFI and Secure Boot enabled, with the Win8
pre-installed. I was originally thinking that I could do things like I use
to with BING, i.e., repartition, etc., but I guess not now. I tried setting
the BIOS to "CSM" which diables UEFI, and was actually able to boot to a
BING CD, but BING saw only 1 ~2TB partition with an error (the laptop
actually has only a 500GB drive).

So, I think that I may need to think about moving to BIBM for this laptop,
plus I am building a new PC, with a new mobo, an Asus P9X79 LE, which I
think also has a UEFI BIOS, but have some questions:

1) Assuming that both the laptop and the new P9X79 mobo allow disabling
secure boot and UEFI, then, would both the laptop and new PC work the same
way as before, and I could just use BING with both of them, just like
before? Or, do I have to move to BIBM to work with the laptop and the
P9X79?

2) From what I can tell, most, maybe all of the BIOSes that support UEFI
allow you to disable secure boot and UEFI, so I was wondering, is there
something that would force me to use those in UEFI/secure boot mode, rather
than non-UEFI mode?

3) Assuming that I *did* want to keep the laptop/PC BIOSes in UEFI mode, if
I used BIBM instead of BING, could I do everything that I use to do with
BING but with BIBM? I think that one thing that going to UEFI would give me
is support for 3TB drives, but I don't have (or need) any 3TB drives (my
largest drives are 2TB, which work fine with BING).

Sorry for all the questions!!

Thanks,
Jim

Brian K
Posts: 2214
Joined: Fri Aug 12, 2011 1:11 am
Location: NSW, Australia

Re: BIBM and new Laptop (UEFI?)?

Post by Brian K »

TeraByte Support wrote:
> BING doesn't support GPT, BIBM does - you'd want to boot BIBM in legacy
> mode.
>

Thanks. Another question. Can you image Win8 on a UEFI system and restore it to a MBR drive?
ohaya
Posts: 229
Joined: Fri Jan 06, 2012 11:40 pm

Re: BIBM and new Laptop (UEFI?)?

Post by ohaya »

Brian K wrote:
> TeraByte Support wrote:
> > BING doesn't support GPT, BIBM does - you'd want to boot BIBM in legacy
> > mode.
> >
>
> Thanks. Another question. Can you image Win8 on a UEFI system and restore it to a MBR
> drive?


Brian,

Based on an experience I just had, I'd guess that the answer to your question is that you might be able to restore it, but it probably won't run.

After I did the restore the 1st time (with BIOS set to UEFI and secure boot enabled), and felt comfortable that the restore actually worked, I tried a test (was curious about the same thing you were asking about), and set the BIOS to non-UEFI ("CMS") and secure boot disabled, and tried the restore. The recovery app started, but then said that UEFI was disabled, and wouldn't continue.

I know that's not 100% proof that restoring a Windows version that was installed with UEFI enabled to an MBR drive, but I think I also some some info that when you install Windows with UEFI enabled, that Windows installation would only work with UEFI enabled.

Jim
ohaya
Posts: 229
Joined: Fri Jan 06, 2012 11:40 pm

Re: BIBM and new Laptop (UEFI?)?

Post by ohaya »

mjnelson99 wrote:
> Can you do a factory restore if you want it back?
>
> Maybe you can create an image before attempting a resize?
>
> You may want to use BIBM or an Image program rather than
> BING since it is probably a 64-bit system.
>
>
> On 12/17/2012 1:59 AM, ohaya wrote:
> > Hi,
> >
> > Oops. Just trashed Win8, trying to shrink the C: partition
> >
> > ![:(]({SMILIES_PATH}/icon_e_sad.gif)
> >
> > ... Earlier, I had tried using Windows Disk management, and it did
> shrink C: successfully, but it took it from ~500GB down to ~250GB, and I'd
> been trying to figure out how to get it down to a more reasonable size
> (~70-100GB), and in the process, it looks like I messed things up. So, I
> now get to test Toshiba's recovery. Thank goodness I made a set of
> recovery DVDs earlier
> >
> > ![:)]({SMILIES_PATH}/icon_e_smile.gif)
> >
> > ...
> >
> > Jim
> >
> >


Hi,

As mentioned earlier, the recovery went ok. The weird thing was that prior to the trashing the Win 8, when I tried to use Windows to shrink the partition it'd only let me shrink to about 250GB. I think that this is because it won't let you shrink the partition to the highest place on the disk where there's an "unmovable" file.

But, after the recovery, again using WIndows, I could shrink it down to about 20GB. I think that this is because when I did the recovery, it put the highest unmovable file lower.

Jim
Post Reply