Problems, I have clicked on resize, its got to 99% and then an error message, I have now ran chkdsk 3 times now, that does not find any problems, after running chkdsk, I click on resize again and i get another error message, what am I doing wrong ?
Newbie here with a couple of question
-
- Posts: 785
- Joined: Fri Aug 12, 2011 1:24 am
Re: Newbie here with a couple of question
As I understand it, restoring to a smaller partition and
there are any files near the end on the original image may
make it impossible to do.
Mary
Defrag may solve that one.
Mary
On 4/15/2012 5:17 PM, DrTeeth wrote:
> On Sun, 15 Apr 2012 14:25:29 PDT, just as I was about to take a herb,
> mjnelson99
>
> disturbed my reverie and wrote:
>
>> I would defrag and image that partition before making the
>> changes.
>
> BIBM moves files if necessary. Considering how long defragging can
> take, there may not be any net time savings. Personally I would not
> (and do not ) bother.
>
> I would definitely image beforehand and to a separate medium. I image
> to a second internal hard disk and them copy my images to an external
> hard drive (which has copies of all the local backups on my network).
>
> Hope you are keeping well Mary.
> --
>
> Cheers
>
> DrT
> ______________________________
> We may not be able to prevent the stormy times in
> our lives; but we can always choose to dance
> in the puddles (Jewish proverb).
>
>
there are any files near the end on the original image may
make it impossible to do.
Mary
Defrag may solve that one.
Mary
On 4/15/2012 5:17 PM, DrTeeth wrote:
> On Sun, 15 Apr 2012 14:25:29 PDT, just as I was about to take a herb,
> mjnelson99
>
> disturbed my reverie and wrote:
>
>> I would defrag and image that partition before making the
>> changes.
>
> BIBM moves files if necessary. Considering how long defragging can
> take, there may not be any net time savings. Personally I would not
> (and do not ) bother.
>
> I would definitely image beforehand and to a separate medium. I image
> to a second internal hard disk and them copy my images to an external
> hard drive (which has copies of all the local backups on my network).
>
> Hope you are keeping well Mary.
> --
>
> Cheers
>
> DrT
> ______________________________
> We may not be able to prevent the stormy times in
> our lives; but we can always choose to dance
> in the puddles (Jewish proverb).
>
>
Re: Newbie here with a couple of question
It would, but he is trying to resize not restore an image. Using 'compact' whilst making the backup also does the trick.mjnelson99 wrote:As I understand it, restoring to a smaller partition and
there are any files near the end on the original image may
make it impossible to do.
Mary
Defrag may solve that one.
DrT
Re: Newbie here with a couple of question
Ive defraged 3 times now !!
-
- Posts: 785
- Joined: Fri Aug 12, 2011 1:24 am
Re: Newbie here with a couple of question
He wants to resize. That means any image he makes beforehand
will be a larger size than after a resize.
Should a problem develop, he may not be able to do a restore
to the smaller partition with the image of a larger size.
I had a problem restoring an IFW-made image of Win 7 x64
using IFL. It was a very small difference - like 8 MB. I
could not restore it at all until I did the below. It was a
restore to the SAME partition that failed, too. I was
surprised I could not reduce it so it would work, especially
since the difference was so small.
I resized the 100 MB partition down just enough to allow the
restore.
Eventually wound up deleting the manufacturer's install of
Win 7 X64 and using the MS Family Pack 3rd computer for a
clean install with no excess that I did not want. That also
got rid of the pesky 100 MB partition.
Wish I had done that first and not messed with
manufacturer's install since I knew that was a possibility.
Mary
On 4/16/2012 2:33 PM, DrTeeth wrote:
> [quote="mjnelson99":2ksmdlgj]As I understand it, restoring to a smaller partition and
> there are any files near the end on the original image may
> make it impossible to do.
> Mary
>
> Defrag may solve that one.[/quote:2ksmdlgj]
> It would, but he is trying to resize not restore an image. Using 'compact' whilst making the backup also does the trick.
>
> DrT
>
>
will be a larger size than after a resize.
Should a problem develop, he may not be able to do a restore
to the smaller partition with the image of a larger size.
I had a problem restoring an IFW-made image of Win 7 x64
using IFL. It was a very small difference - like 8 MB. I
could not restore it at all until I did the below. It was a
restore to the SAME partition that failed, too. I was
surprised I could not reduce it so it would work, especially
since the difference was so small.
I resized the 100 MB partition down just enough to allow the
restore.
Eventually wound up deleting the manufacturer's install of
Win 7 X64 and using the MS Family Pack 3rd computer for a
clean install with no excess that I did not want. That also
got rid of the pesky 100 MB partition.
Wish I had done that first and not messed with
manufacturer's install since I knew that was a possibility.
Mary
On 4/16/2012 2:33 PM, DrTeeth wrote:
> [quote="mjnelson99":2ksmdlgj]As I understand it, restoring to a smaller partition and
> there are any files near the end on the original image may
> make it impossible to do.
> Mary
>
> Defrag may solve that one.[/quote:2ksmdlgj]
> It would, but he is trying to resize not restore an image. Using 'compact' whilst making the backup also does the trick.
>
> DrT
>
>
-
- Posts: 785
- Joined: Fri Aug 12, 2011 1:24 am
Re: Newbie here with a couple of question
Doesn't take very long after the first time either, does it?
Mary
On 4/16/2012 2:43 PM, liteace wrote:
> Ive defraged 3 times now !!
>
>
Mary
On 4/16/2012 2:43 PM, liteace wrote:
> Ive defraged 3 times now !!
>
>
-
- Posts: 3738
- Joined: Thu May 05, 2011 10:37 pm
Re: Newbie here with a couple of question
58 - problem with volume bitmap or attribute invalid.
43 - error occurred changing a cluster number.
Based on those which are very rare if at all ...
Run memtest86 on the system (memtest.org) at least two passes then chkdsk /f then you could try BIOS (direct) instead of just BIOS or update the BIOS. If still problem try running the drive manufactures scan utility or spinrite to test the surface.
43 - error occurred changing a cluster number.
Based on those which are very rare if at all ...
Run memtest86 on the system (memtest.org) at least two passes then chkdsk /f then you could try BIOS (direct) instead of just BIOS or update the BIOS. If still problem try running the drive manufactures scan utility or spinrite to test the surface.
Re: Newbie here with a couple of question
Ive done it, just got 1 little problem, when I boot I get this page:
how do i change it so when I boot I get this page:
Thanks
how do i change it so when I boot I get this page:
Thanks
-
- Posts: 305
- Joined: Wed Aug 31, 2011 4:22 pm
Re: Newbie here with a couple of question
To have it start at the boot menu, you need to select "Normal" on the Boot Options screen when creating the boot media with MakeDisk (that's the default choice), and then reinstall.
With it already installed, you can also just delete the line "StartAt=2" from the file bootitbm.ini on the Bootit EMBRM partition, by using the Edit File function in Partition Work. On the next boot, it should start at the boot menu, rather than in Partition Work.
With it already installed, you can also just delete the line "StartAt=2" from the file bootitbm.ini on the Bootit EMBRM partition, by using the Edit File function in Partition Work. On the next boot, it should start at the boot menu, rather than in Partition Work.
Re: Newbie here with a couple of question
TeraByte Support(TP) wrote:To have it start at the boot menu, you need to select "Normal" on the Boot Options screen when creating the boot media with MakeDisk (that's the default choice), and then reinstall.
With it already installed, you can also just delete the line "StartAt=2" from the file bootitbm.ini on the Bootit EMBRM partition, by using the Edit File function in Partition Work. On the next boot, it should start at the boot menu, rather than in Partition Work.
Thanks for the info, Ive just deleted the line "startA=2" and now it come up with direct boot menu and not just boot menu ?