SATAIgnoreMask option

User discussion and information resource forum for BootIt Bare Metal.

SATAIgnoreMask option

Postby rich071 » Sat Nov 24, 2012 8:36 pm

First of all, I have found a solution to my issue, however, I am curious that one of the option settings that I had tried did not work as expected. I just a need a clarification if it should have worked.

The system includes Win8 / Win7 / WinXP, all 64 bit along with a couple of Win XP's with 32 bit. I have an older 32GB SSD, Drive V:, that I use to hold the temp files, Internet temp files, portable utilities and a common page file for all the OS's. I recently added two sata addon cards since I already had them. They are for external esata docks.

The issue, the two ahci sata bios's load before the system ahci bios, forcing the drives to change positions, if a drive is in the dock and is running when switching OS's, Drive V is gone since it had changed it in the Bootit configuration. The solution outside of Bootit BM, was to rearrange the order of the hard drives in the system bios. I moved the docked drive to the bottom of the list and everything is fine. I verified the results by replacing the docked drive with a different one and rebooted. This was another one of those DOH! moments. :o

Sometimes, I fail the KISS method, so I searched throuh the manual for a solution and found the SATAIgnoreMask option. I added it to the bootitbm.ini in the options setting of the bootit partition, using a value of 3 to ignore the first two controllers. It made no difference before or after so now I have it removed.

The question, should this have worked to ignore the first two contollers within Bootit? FYI, both addon controllers utilize the latest Silicon Image firmware.

Thanks in advance for a clarification, on the above, and for best utilities ever. This is by far the best utility to multi boot and the Image for Windows has no competion with the backing up the offline EMBR partitions. Personally, I prefer the offline backups.

Thanks again,
Rich071
rich071
 
Posts: 24
Joined: Sun Jun 17, 2012 10:14 am

Re: SATAIgnoreMask option

Postby TeraByte Support » Sun Nov 25, 2012 10:01 am

it would only have affected it for use of the BIOS (direct) operation. Not
what drives the BIOS had found.

"rich071" wrote in message news:3875@public.bootitbm...

First of all, I have found a solution to my issue, however, I am curious
that one of the option settings that I had tried did not work as expected. I
just a need a clarification if it should have worked.

The system includes Win8 / Win7 / WinXP, all 64 bit along with a couple of
Win XP's with 32 bit. I have an older 32GB SSD, Drive V:, that I use to hold
the temp files, Internet temp files, portable utilities and a common page
file for all the OS's. I recently added two sata addon cards since I already
had them. They are for external esata docks.

The issue, the two ahci sata bios's load before the system ahci bios,
forcing the drives to change positions, if a drive is in the dock and is
running when switching OS's, Drive V is gone since it had changed it in the
Bootit configuration. The solution outside of Bootit BM, was to rearrange
the order of the hard drives in the system bios. I moved the docked drive to
the bottom of the list and everything is fine. I verified the results by
replacing the docked drive with a different one and rebooted. This was
another one of those DOH! moments.

![:o]({SMILIES_PATH}/icon_e_surprised.gif)

Sometimes, I fail the KISS method, so I searched throuh the manual for a
solution and found the SATAIgnoreMask option. I added it to the bootitbm.ini
in the options setting of the bootit partition, using a value of 3 to ignore
the first two controllers. It made no difference before or after so now I
have it removed.

The question, should this have worked to ignore the first two contollers
within Bootit? FYI, both addon controllers utilize the latest Silicon Image
firmware.

Thanks in advance for a clarification, on the above, and for best utilities
ever. This is by far the best utility to multi boot and the Image for
Windows has no competion with the backing up the offline EMBR partitions.
Personally, I prefer the offline backups.

Thanks again,
Rich071

TeraByte Support
 
Posts: 2274
Joined: Thu May 05, 2011 3:37 pm


Return to BootIt Bare Metal

cron